> -----Original Message-----
> From: u-boot-boun...@lists.denx.de
> [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Steve Sakoman
> Sent: Saturday, November 06, 2010 8:35 AM
> To: Nishanth Menon
> Cc: u-boot@lists.denx.de; Koen Kooi
> Subject: Re: [U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add
> xM rev B to ID table
>
[snip]
> Note that for 36xx my patch sets the max to 720 -- this is because
> mainline/linux-omap currently does not support 1000. We can adjust
> that when kernel support for 1000 appears.
[sp] 720MHz is not a valid frequency for 36x. It is the highest freq
for OMAP35x - subject to associated bit set in the silicon.
600MHz would be be safe for all OMAP35x family processors.
For 36xx, the freq should be 800MHz (if you don't want 1GHz).
[snip]
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
