Premi, Sanjeev wrote, on 11/07/2010 03:16 AM: >> -----Original Message----- >> From: u-boot-boun...@lists.denx.de >> [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Steve Sakoman >> Sent: Saturday, November 06, 2010 8:35 AM >> To: Nishanth Menon >> Cc: u-boot@lists.denx.de; Koen Kooi >> Subject: Re: [U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add >> xM rev B to ID table >> > [snip] > >> Note that for 36xx my patch sets the max to 720 -- this is because >> mainline/linux-omap currently does not support 1000. We can adjust >> that when kernel support for 1000 appears. > > [sp] 720MHz is not a valid frequency for 36x. It is the highest freq > for OMAP35x - subject to associated bit set in the silicon. > 600MHz would be be safe for all OMAP35x family processors. > > For 36xx, the freq should be 800MHz (if you don't want 1GHz).
yep, Good catch :) , 720 is not valid either 800/1GHz :( -- Regards, Nishanth Menon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot