On Thu, 9 Dec 2021 15:51:50 +0330 Javad Rahimi <javad321ja...@gmail.com> wrote:
Hi, > On Thu, Dec 9, 2021 at 2:54 PM Andre Przywara <andre.przyw...@arm.com> wrote: > Hi Andre, > > > > On Thu, 9 Dec 2021 14:38:08 +0330 > > Javad Rahimi <javad321ja...@gmail.com> wrote: > > > > Hi Javad, > > > > > On Thu, Dec 9, 2021 at 6:24 AM Javad Rahimi <javad321ja...@gmail.com> > > > wrote: > > > > > > > > On Wed, Dec 8, 2021 at 9:13 PM Andre Przywara <andre.przyw...@arm.com> > > > > wrote: > > > > > > > > > > On Wed, 8 Dec 2021 20:48:54 +0330 > > > > > Javad Rahimi <javad321ja...@gmail.com> wrote: > > > > > > > > > > > On Wed, Dec 8, 2021 at 8:33 PM Andre Przywara > > > > > > <andre.przyw...@arm.com> wrote: > > > > > > > > > > > > > > On Wed, 8 Dec 2021 19:14:22 +0330 > > > > > > > Javad Rahimi <javad321ja...@gmail.com> wrote: > > > > > > > > > > > > > > > On Wed, Dec 8, 2021 at 6:05 PM Andre Przywara > > > > > > > > <andre.przyw...@arm.com> wrote: > > > > > > > > > > > > > > > > > > On Wed, 8 Dec 2021 15:25:54 +0100 > > > > > > > > > Frank Wunderlich <fran...@public-files.de> wrote: > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > you should add maintainer email for your patch > > > > > > > > > > > > > > > > > > > > $ scripts/get_maintainer.pl board/sunxi/board.c > > > > > > > > > > Jagan Teki <ja...@amarulasolutions.com> (maintainer:ARM > > > > > > > > > > SUNXI) > > > > > > > > > > Andre Przywara <andre.przyw...@arm.com> (maintainer:ARM > > > > > > > > > > SUNXI) > > > > > > > > > > u-boot@lists.denx.de (open list) > > > > > > > > > > > > > > > > > > Thanks Frank! > > > > > > > > > > > > > > > > > > > > Gesendet: Mittwoch, 08. Dezember 2021 um 15:22 Uhr > > > > > > > > > > > Von: "Javad Rahimi" <javad321ja...@gmail.com> > > > > > > > > > > > An: u-boot@lists.denx.de > > > > > > > > > > > Cc: "Javad Rahimi" <javad321ja...@gmail.com> > > > > > > > > > > > Betreff: [PATCH v2] Cubieboard2:SUN7I:Add LED BOOT support > > > > > > > > > > > > > > > > > > > > > > This feature makes it possible to assign one of > > > > > > > > > > > LED1(PH20) and LED2(PH21) to BOOT process LED. > > > > > > > > > > > User should activates the "Enable status LED API" in > > > > > > > > > > > "Device Drivers -> LED Support" > > > > > > > > > > > > > > > > > > Please have a look at the current pinephone_defconfig, > > > > > > > > > because that uses > > > > > > > > > the boot LED already in a much easier fashion: > > > > > > > > > https://source.denx.de/u-boot/u-boot/-/commit/0534153fd1 > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > Andre > > > > > > > > > > > > > > > > > Hi Andre, > > > > > > > > Thanks for your comments. I studied the pinephone_defconfig. > > > > > > > > By default, when activating the same options on > > > > > > > > Cubieboard2_defconfig > > > > > > > > it shows linker error for `__led_init` and `__led_set`. > > > > > > > > In other words, they are not defined. So, in this patch, I > > > > > > > > added the > > > > > > > > implementation for these functions for this board. > > > > > > > > > > > > > > Did you add the: > > > > > > > CONFIG_SPL_DRIVERS_MISC=y > > > > > > > line as well? And re-ran make Cubieboard2_defconfig? > > > > > > > Because that seemed to work for me. > > > > > > > > > > > > > > Cheers, > > > > > > > Andre > > > > > > > > > > > > > > > > > > > > When I add CONFIG_SPL_DRIVERS_MISC=y > > > > > > By flashing SD card and turning on the board, It freezes in this > > > > > > step: > > > > > > ``` > > > > > > U-Boot SPL 2022.01-rc3-00025-gf570594bc9-dirty (Dec 08 2021 - > > > > > > 20:36:51 +0330) > > > > > > ``` > > > > > > ----------------------------------------- > > > > > > The customized defconfig file for Cubieboard: > > > > > > ``` > > > > > > CONFIG_ARM=y > > > > > > CONFIG_ARCH_SUNXI=y > > > > > > CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" > > > > > > CONFIG_SPL_DRIVERS_MISC=y > > > > > > CONFIG_SPL=y > > > > > > CONFIG_MACH_SUN7I=y > > > > > > CONFIG_DRAM_CLK=480 > > > > > > CONFIG_MMC0_CD_PIN="PH1" > > > > > > CONFIG_SATAPWR="PB8" > > > > > > CONFIG_AHCI=y > > > > > > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > > > > > > CONFIG_SPL_I2C=y > > > > > > CONFIG_SCSI_AHCI=y > > > > > > CONFIG_SYS_I2C_MVTWSI=y > > > > > > CONFIG_SYS_I2C_SLAVE=0x7f > > > > > > CONFIG_SYS_I2C_SPEED=400000 > > > > > > CONFIG_PHY_REALTEK=y > > > > > > CONFIG_ETH_DESIGNWARE=y > > > > > > CONFIG_MII=y > > > > > > CONFIG_SUN7I_GMAC=y > > > > > > CONFIG_SCSI=y > > > > > > CONFIG_USB_EHCI_HCD=y > > > > > > CONFIG_USB_OHCI_HCD=y > > > > > > CONFIG_LED_STATUS=y > > > > > > CONFIG_LED_STATUS_GPIO=y > > > > > > CONFIG_LED_STATUS0=y > > > > > > CONFIG_LED_STATUS_BIT=114 > > > > > > > > > > This is the GPIO number, you need to adjust this to point to the pin > > > > > your > > > > > LED is connected to. PH20 would be 244, for instance: > > > > > ('H' - 'A') * 32 + 20 > > > > > > > > > > Cheers, > > > > > Andre > > > > > > > > > Thanks, > > > > Now the LED is ON, but the loader still freezes in (SPL, I think) > > > > ``` > > > > U-Boot SPL 2022.01-rc3-00025-gf570594bc9-dirty (Dec 09 2021 - 06:19:40 > > > > +0330) > > > > ``` > > > > Best Regards, > > > > Javad > > > Hi Andre, > > > The freeze problem solved when I placed `status_led_init` function > > > after > > > gd->ram_size = sunxi_dram_init(); > > > When it is called before sunxi_dram_init(), the bootloader freezes. > > > > That's probably our old friend .bss in SPL again: To save precious SRAM > > space, we place the BSS section in DRAM, so it's only available after the > > DRAM init happened. So far the code that runs before DRAM init is not using > > variables placed in BSS, so everything works. Possible solutions are: > > 1) see if we can get rid of BSS variables in the LED code (my bet is on > > "static int status_led_init_done = 0;" as the culprit) > > 2) move the LED init after the DRAM init. That's probably a bit late, > > though, depends a bit on what people expect from the boot LED. > > 3) I guess the A20 can afford BSS in SRAM, but that would not help with > > other (64-bit) boards. I actually wonder how it works there, though? > > > > I'd prefer 1), but 2) is surely easier. > > > > Cheers, > > Andre > > > Your guess was true. The `status_led_init_done` was the culprit. > I removed this variable and added a one-bit variable named "initialized" > to the `led_dev_t ` . In this case, when `__led_init` is called, we can > set it for every single LED. In this case, we can check `ld->initilized` > for each led rather than blindly checking the `status_led_init_done` > global variable. Interesting idea, though I don't know too much about this code, and why we had the global variable in the first place. Can you prepare a patch and send it to the mailing list, so that people can have a look and discuss this? Cheers, Andre > Best Regards, > Javad > > > > > > Best Regards, > > > Javad > > > > > > CONFIG_LED_STATUS_STATE=2 > > > > > > ``` > > > > > > Best Regards, > > > > > > Javad > > > > > > > > > > > > > > > > > > > > > > Signed-off-by: Javad Rahimi <javad321ja...@gmail.com> > > > > > > > > > > > --- > > > > > > > > > > > This is my first contributation in open source world. > > > > > > > > > > > I'm sorry if I have mistakes in my commits and versioning. > > > > > > > > > > > I do my best to learn fast. > > > > > > > > > > > > > > > > > > > > > > Changes in v2: > > > > > > > > > > > - Missed braces added > > > > > > > > > > > - Unnecessary debug removed > > > > > > > > > > > - Some typo fixed > > > > > > > > > > > > > > > > > > > > > > board/sunxi/board.c | 49 > > > > > > > > > > > +++++++++++++++++++++++++++++++++++++++++++++ > > > > > > > > > > > 1 file changed, 49 insertions(+) > > > > > > > > > > > > > > > > > > > > > > diff --git a/board/sunxi/board.c b/board/sunxi/board.c > > > > > > > > > > > index 4f5747c34a..5e2f6ae902 100644 > > > > > > > > > > > --- a/board/sunxi/board.c > > > > > > > > > > > +++ b/board/sunxi/board.c > > > > > > > > > > > @@ -1002,3 +1002,52 @@ int > > > > > > > > > > > board_fit_config_name_match(const char *name) > > > > > > > > > > > return ret; > > > > > > > > > > > } > > > > > > > > > > > #endif > > > > > > > > > > > + > > > > > > > > > > > +#if defined(CONFIG_LED_STATUS) && > > > > > > > > > > > defined(CONFIG_LED_STATUS_BOOT) && > > > > > > > > > > > defined(CONFIG_LED_STATUS_BOARD_SPECIFIC) > > > > > > > > > > > + > > > > > > > > > > > +#define CUBIE2_LED_BOOT_GPIO "PH20" > > > > > > > > > > > +static int gpio_boot_led; > > > > > > > > > > > + > > > > > > > > > > > +void __led_init(led_id_t mask, int state) > > > > > > > > > > > +{ > > > > > > > > > > > + int ret; > > > > > > > > > > > + > > > > > > > > > > > + if (mask != CONFIG_LED_STATUS_BOOT) > > > > > > > > > > > + return; > > > > > > > > > > > + > > > > > > > > > > > + ret = gpio_lookup_name(CUBIE2_LED_BOOT_GPIO, NULL, > > > > > > > > > > > NULL, &gpio_boot_led); > > > > > > > > > > > + > > > > > > > > > > > + if (ret) > > > > > > > > > > > + return; > > > > > > > > > > > + > > > > > > > > > > > + ret = gpio_request(gpio_boot_led, "boot_led"); > > > > > > > > > > > + if (ret == -1) { > > > > > > > > > > > + debug("[gpio_request] Error:%d\n", ret); > > > > > > > > > > > + return; > > > > > > > > > > > + } > > > > > > > > > > > + > > > > > > > > > > > + ret = gpio_direction_output(gpio_boot_led, 1); > > > > > > > > > > > + if (ret == -1) { > > > > > > > > > > > + debug("[gpio_direction_output] Error:%d\n", > > > > > > > > > > > ret); > > > > > > > > > > > + return; > > > > > > > > > > > + } > > > > > > > > > > > + __led_set(mask, state); > > > > > > > > > > > +} > > > > > > > > > > > + > > > > > > > > > > > +void __led_set(led_id_t mask, int state) > > > > > > > > > > > +{ > > > > > > > > > > > + if (mask != CONFIG_LED_STATUS_BOOT) > > > > > > > > > > > + return; > > > > > > > > > > > + > > > > > > > > > > > + gpio_set_value(gpio_boot_led, state); > > > > > > > > > > > +} > > > > > > > > > > > + > > > > > > > > > > > +void __led_toggle(led_id_t mask) > > > > > > > > > > > +{ > > > > > > > > > > > + if (mask != CONFIG_LED_STATUS_BOOT) > > > > > > > > > > > + return; > > > > > > > > > > > + > > > > > > > > > > > + gpio_set_value(gpio_boot_led, > > > > > > > > > > > !gpio_get_value(gpio_boot_led)); > > > > > > > > > > > +} > > > > > > > > > > > + > > > > > > > > > > > +#endif > > > > > > > > > > > -- > > > > > > > > > > > 2.25.1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >