[PATCH 1/8] arm: kirkwood: Pogoplug-V4 : Add DTS files

[Tony Dinh]

Add DTS files for Pogoplug V4 board

Signed-off-by: Tony Dinh <mibo...@gmail.com>
---

 arch/arm/dts/Makefile                 |   1 +
 arch/arm/dts/kirkwood-pogoplug_v4.dts | 145 ++++++++++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 arch/arm/dts/kirkwood-pogoplug_v4.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7f622fedbd..716c6c0ed2 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
        kirkwood-openrd-client.dtb \
        kirkwood-openrd-ultimate.dtb \
        kirkwood-pogo_e02.dtb \
+       kirkwood-pogoplug_v4.dtb \
        kirkwood-sheevaplug.dtb
 
 dtb-$(CONFIG_MACH_S900) += \
diff --git a/arch/arm/dts/kirkwood-pogoplug_v4.dts 
b/arch/arm/dts/kirkwood-pogoplug_v4.dts
new file mode 100644
index 0000000000..b4754f600e
--- /dev/null
+++ b/arch/arm/dts/kirkwood-pogoplug_v4.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2021 Tony Dinh <mibo...@gmail.com>
+ *
+ * Device tree file for the Pogoplug V4/Mobile
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+       model = "Pogoplug v4";
+       compatible = "cloudengines,pogoplug-v4", "cloudengines,pogoplug-mobile",
+               "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x8000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+               stdout-path = &uart0;
+       };
+
+       ocp@f1000000 {
+               pinctrl: pin-controller@10000 {
+                       pmx_led_green: pmx-led-green {
+                               marvell,pins = "mpp22";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_red: pmx-led-red {
+                               marvell,pins = "mpp24";
+                               marvell,function = "gpio";
+                       };
+                       pmx_button_eject: pmx-button-eject {
+                               marvell,pins = "mpp29";
+                               marvell,function = "gpio";
+                       };
+               };
+
+               serial@12000 {
+                       status = "ok";
+               };
+
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <2>;
+               };
+
+               mvsdio@90000 {
+                       pinctrl-0 = <&pmx_sdio>;
+                       pinctrl-names = "default";
+                       status = "okay";
+                       cd-gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+                       /* No WP GPIO */
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               pinctrl-0 = <&pmx_led_red &pmx_led_green>;
+               pinctrl-names = "default";
+
+               health {
+                       label = "status:green:health";
+                       gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               fault {
+                       label = "status:red:fault";
+                       gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-0 = <&pmx_button_eject>;
+               pinctrl-names = "default";
+
+               button@1 {
+                       label = "Eject Button";
+                       linux,code = <KEY_EJECTCD>;
+                       gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+};
+
+&nand {
+       status = "okay";
+
+       partition@0 {
+               label = "u-boot";
+               reg = <0x0000000 0x200000>;
+       };
+
+       partition@200000 {
+               label = "uImage";
+               reg = <0x200000 0x300000>;
+       };
+
+       partition@500000 {
+               label = "uImage2";
+               reg = <0x500000 0x300000>;
+       };
+
+       partition@800000 {
+               label = "failsafe";
+               reg = <0x800000 0x800000>;
+       };
+
+       partition@1000000 {
+               label = "root";
+               reg = <0x1000000 0x7000000>;
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+       };
+};
+
+&pciec {
+       status = "okay";
+};
+
+&pcie0 {
+       status = "okay";
+};
-- 
2.20.1