From: Ye Li <ye...@nxp.com>
Found the lposc fuse loading having impact to cpu idle in kernel.
Without the loading in dual boot mode, kernel will hang after idle
for a while.
Reviewed-by: Peng Fan <peng....@nxp.com>
Signed-off-by: Ye Li <ye...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
board/freescale/imx8ulp_evk/spl.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/board/freescale/imx8ulp_evk/spl.c
b/board/freescale/imx8ulp_evk/spl.c
index e6949b5e43..9bc9081617 100644
--- a/board/freescale/imx8ulp_evk/spl.c
+++ b/board/freescale/imx8ulp_evk/spl.c
@@ -76,10 +76,8 @@ void spl_board_init(void)
/* After AP set iomuxc0, the i2c can't work, Need M33 to set it now */
- /* Load the lposc fuse for single boot to work around ROM issue,
- * The fuse depends on S400 to read.
- */
- if (is_soc_rev(CHIP_REV_1_0) && get_boot_mode() == SINGLE_BOOT)
+ /* Load the lposc fuse to work around ROM issue. The fuse depends on
S400 to read. */
+ if (is_soc_rev(CHIP_REV_1_0))
load_lposc_fuse();
upower_init();
--
2.30.0
