> -----Original Message-----
> From: Wolfgang Denk [mailto:w...@denx.de]
> Sent: Monday, November 29, 2010 4:05 PM
> To: Premi, Sanjeev
> Cc: Albert ARIBAUD; u-boot@lists.denx.de
> Subject: Re: [U-Boot] Build failures with older toolchain
>
> Dear "Premi, Sanjeev",
>
> can you please quote onlye _relevant_ parts of previous messages?
> Thanks.
[sp] I do try to snip the messages. I didn't do so this time
to maintain context - but, may be, I erred on wrong side.
>
> In message
> <b85a65d85d7eb246be421b3fb0fbb5930247a0a...@dbde02.ent.ti.com>
> you wrote:
> >
[snip]
>
> Are you sure these are the only errors you see?
>
> Because for me, building for omap3_evm fails like this:
>
> start.S: Assembler messages:
> start.S:144: Error: constant expression expected -- `ldr
> sp,=((0x4020FFFC-CONFIG_SYS_GBL_DATA_SIZE))'
> make[1]: *** [/work/wd/tmp-arm/arch/arm/cpu/armv7/start.o] Error 1
> make: *** [/work/wd/tmp-arm/arch/arm/cpu/armv7/start.o] Error 2
> make: *** Waiting for unfinished jobs....
> make: *** wait: No child processes. Stop.
>
> And this is a clear indication that the board support code has not
> been adapted yet (CONFIG_SYS_GBL_DATA_SIZE has been replaced by
> GENERATED_GBL_DATA_SIZE some time ago).
[sp] I just responded to Albert' message on same issue.
I stumbled on the current problem while trying to fix just the
problem you notice here.
Assuming relation, I had not submitted the patch - so far. But
it looks to be causing more confusion - so patch follows in next
few mins.
~sanjeev
>
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
> You said you didn't want to use CGI.pm, but methinks you are
> needlessly reinventing the wheel, one spoke at a time. Either you are
> masochistic, or you just haven't seen enough of what CGI.pm can do
> for you. -- Randal L. Schwartz in <8cyb81rg81....@gadget.cscaper.com>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
