On 3/11/22 19:14, Robert Marko wrote:
Generic SDHCI driver received support for checking the busy status by polling the DAT[0] level instead of waiting for the worst MMC switch time.Unfortunately, it appears that this does not work for Xenon controllers despite being a part of the standard SDHCI registers and the Armada 3720 datasheet itself telling that BIT(20) is useful for detecting the DAT[0] busy signal. I have tried increasing the timeout value, but I have newer managed to catch DAT_LEVEL bits change from 0 at all. This issue appears to hit most if not all SoC-s supported by Xenon driver, at least A3720, A8040 and CN9130 have non working eMMC currently. So, until a better solution is found drop the wait_dat0 OP for Xenon. I was able to only test it on A3720, but it should work for others as well. Fixes: 40e6f52454fc ("drivers: mmc: Add wait_dat0 support for sdhci driver") Signed-off-by: Robert Marko <robert.ma...@sartura.hr>
Reviewed-by: Stefan Roese <s...@denx.de> Thanks, Stefan
--- drivers/mmc/xenon_sdhci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c index e292f2903d..2f8805096c 100644 --- a/drivers/mmc/xenon_sdhci.c +++ b/drivers/mmc/xenon_sdhci.c @@ -439,6 +439,8 @@ static const struct sdhci_ops xenon_sdhci_ops = { .set_ios_post = xenon_sdhci_set_ios_post };+static struct dm_mmc_ops xenon_mmc_ops;+ static int xenon_sdhci_probe(struct udevice *dev) { struct xenon_sdhci_plat *plat = dev_get_plat(dev); @@ -452,6 +454,9 @@ static int xenon_sdhci_probe(struct udevice *dev) host->mmc->dev = dev; upriv->mmc = host->mmc;+ xenon_mmc_ops = sdhci_ops;+ xenon_mmc_ops.wait_dat0 = NULL; + /* Set quirks */ host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_32BIT_DMA_ADDR;@@ -568,7 +573,7 @@ U_BOOT_DRIVER(xenon_sdhci_drv) = {.id = UCLASS_MMC, .of_match = xenon_sdhci_ids, .of_to_plat = xenon_sdhci_of_to_plat, - .ops = &sdhci_ops, + .ops = &xenon_mmc_ops, .bind = xenon_sdhci_bind, .probe = xenon_sdhci_probe, .remove = xenon_sdhci_remove,
Viele Grüße, Stefan Roese -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
