On Mon, Mar 14, 2022 at 2:10 PM Tom Rini <tr...@konsulko.com> wrote: > > On Mon, Mar 14, 2022 at 06:37:02PM +0900, Jaehoon Chung wrote: > > On 3/12/22 03:14, Robert Marko wrote: > > > Generic SDHCI driver received support for checking the busy status by > > > polling the DAT[0] level instead of waiting for the worst MMC switch time. > > > > > > Unfortunately, it appears that this does not work for Xenon controllers > > > despite being a part of the standard SDHCI registers and the Armada 3720 > > > datasheet itself telling that BIT(20) is useful for detecting the DAT[0] > > > busy signal. > > > > > > I have tried increasing the timeout value, but I have newer managed to > > > catch DAT_LEVEL bits change from 0 at all. > > > > > > This issue appears to hit most if not all SoC-s supported by Xenon driver, > > > at least A3720, A8040 and CN9130 have non working eMMC currently. > > > > > > So, until a better solution is found drop the wait_dat0 OP for Xenon. > > > I was able to only test it on A3720, but it should work for others as > > > well. > > > > > > Fixes: 40e6f52454fc ("drivers: mmc: Add wait_dat0 support for sdhci > > > driver") > > > Signed-off-by: Robert Marko <robert.ma...@sartura.hr> > > > > Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com> > > Since this is a regression fix, will this be in the PR with the imx fix > as well? Thanks!
Hi Tom, Was this question directed at me or? Regards, Robert > > -- > Tom -- Robert Marko Staff Embedded Linux Engineer Sartura Ltd. Lendavska ulica 16a 10000 Zagreb, Croatia Email: robert.ma...@sartura.hr Web: www.sartura.hr