On Mon, Mar 14, 2022 at 08:22:10PM +0100, Soeren Moch wrote: > > On 14.03.22 19:28, Tom Rini wrote: > > On Mon, Mar 14, 2022 at 12:24:36PM -0600, Simon Glass wrote: > > > Hi Soeren, > > > > > > On Mon, 14 Mar 2022 at 02:26, Soeren Moch <sm...@web.de> wrote: > > > > ... to get rid of the build warning. > > > > Unfortunately we still need the board specific serial pin init code. > > > > Otherwise the first boot messages over the serial console are lost. > > > > > > > > Signed-off-by: Soeren Moch <sm...@web.de> > > > > --- > > > > Cc: Stefano Babic <sba...@denx.de> > > > > Cc: Fabio Estevam <feste...@gmail.com> > > > > Cc: Tom Rini <tr...@konsulko.com> > > > > Cc: Simon Glass <s...@chromium.org> > > > > Cc: u-boot@lists.denx.de > > > > > > > > The whole purpose of DM is somewhat defeated when we still need board > > > > specific initializations. Any ideas how we can get all boot messages > > > > without board specific inits? 'u-boot,dm-pre-reloc;' in the uart device > > > > tree node did not help. > > > You can put that in your serial driver, perhaps? Or in the initial SoC > > > init code? > Why should I do so? The whole point of DM is initializing devices from > DT. And when I wish to do so pre-relocation, it is advertised in DM to > add 'u-boot,dm-pre-reloc;' for this purpose. I tried, it did not work. > And this is nothing closely related to the serial driver itself, I just > want the pin setup running pre-relocation and not as late as it is > running now under DM_SERIAL. > > I also do not want to run this pin setup twice (first in board or SoC > code and again by DM_SERIAL later). Maybe I miss something obvious, but > duplication of the setup code cannot be a proper solution. > > > > > > Another recent way (in -next) is to use events to monitor the > > > EVT_DM_PRE_PROBE event for the serial driver. > I can monitor the probe event, OK. But how can this solve my problem? > Again, maybe I miss something obvious, please tell me when I do so. > > It's just the same thing every single imx platform is doing. > > > Sorry, I don't understand what you mean here. The reference platform for > my board is mx6sabresd. This is not converted to DM_SERIAL yet. Most (?) > imx boards use SPL, pin setup is different there. > I looked into imx boards with DM_SERIAL. They either removed the > board-specific setup code (which results in missing early boot messages: > u-boot version, board name, DDR size, ...) or they are playing tricks in > SPL (not the clean and easy solution that DM promises). Maybe I missed a > better reference for the DM_SERIAL conversion without SPL. Can you point > me to such board?
My point, largely to Simon, sorry, is that this isn't a "tbs2910" specific problem, but rather something that's not solved for any of the imx platforms as they do some form of what you note above. I suspect it's not solved for anything else either and other platforms are doing some number of what you said above (or relying on something else already having done the pinmux). -- Tom
signature.asc
Description: PGP signature