> Add pwm1/backlight support nodes for imx8mm_evk board
>
> Signed-off-by: Tommaso Merciai <tommaso.merc...@amarulasolutions.com>
> ---
> arch/arm/dts/imx8mm-evk.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm/dts/imx8mm-evk.dtsi b/arch/arm/dts/imx8mm-evk.dtsi
> index 60179e006d..e7a2bd8a64 100644
> --- a/arch/arm/dts/imx8mm-evk.dtsi
> +++ b/arch/arm/dts/imx8mm-evk.dtsi
> @@ -41,6 +41,15 @@
> enable-active-high;
> };
>
> + backlight: backlight {
> + status = "disabled";
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = <0 255>;
> + num-interpolated-steps = <255>;
> + default-brightness-level = <250>;
> + };
> +
> ir-receiver {
> compatible = "gpio-ir-receiver";
> gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> @@ -350,6 +359,12 @@
> status = "okay";
> };
>
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_backlight>;
> + status = "disabled";
> +};
> +
> &iomuxc {
> pinctrl_fec1: fec1grp {
> fsl,pins = <
> @@ -491,4 +506,10 @@
> MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
> >;
> };
> +
> + pinctrl_backlight: backlightgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x06
> + >;
> + };
Will this also be submitted to upstream linux? Otherwise, the device
trees will diverge.
-michael
