From: Peng Fan <peng....@nxp.com>
Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MN.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
include/configs/imx8m.h | 10 ++++++++++
include/configs/imx8mn_bsh_smm_s2_common.h | 17 +----------------
include/configs/imx8mn_evk.h | 20 +-------------------
include/configs/imx8mn_var_som.h | 15 +--------------
include/configs/imx8mn_venice.h | 18 +-----------------
5 files changed, 14 insertions(+), 66 deletions(-)
diff --git a/include/configs/imx8m.h b/include/configs/imx8m.h
index 3d4ea834bd0..30dc01221e6 100644
--- a/include/configs/imx8m.h
+++ b/include/configs/imx8m.h
@@ -16,6 +16,8 @@
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#ifdef CONFIG_SPL_BUILD
+
+#ifdef CONFIG_IMX8MM
#define CONFIG_SPL_STACK 0x920000
#define CONFIG_SPL_BSS_START_ADDR 0x910000
#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
@@ -25,5 +27,13 @@
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CONFIG_MALLOC_F_ADDR 0x930000
+#elif defined(CONFIG_IMX8MN)
+#define CONFIG_SPL_STACK 0x980000
+#define CONFIG_SPL_BSS_START_ADDR 0x950000
+#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
+
+#endif
#endif
#endif
diff --git a/include/configs/imx8mn_bsh_smm_s2_common.h
b/include/configs/imx8mn_bsh_smm_s2_common.h
index 57be38d9433..eb210dc597b 100644
--- a/include/configs/imx8mn_bsh_smm_s2_common.h
+++ b/include/configs/imx8mn_bsh_smm_s2_common.h
@@ -6,25 +6,10 @@
#ifndef __IMX8MN_BSH_SMM_S2_COMMON_H
#define __IMX8MN_BSH_SMM_S2_COMMON_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
+#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-
-#define CONFIG_SPL_STACK 0x980000
-#define CONFIG_SPL_BSS_START_ADDR 0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
-
-
-
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index c0e9b0e9872..6e21192ea03 100644
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -6,28 +6,10 @@
#ifndef __IMX8MN_EVK_H
#define __IMX8MN_EVK_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
+#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x980000
-#define CONFIG_SPL_BSS_START_ADDR 0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
-
-/* For RAW image gives a error info not panic */
-
-#endif
-
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h
index 6ce60b0d704..fc9c4ca4530 100644
--- a/include/configs/imx8mn_var_som.h
+++ b/include/configs/imx8mn_var_som.h
@@ -6,23 +6,10 @@
#ifndef __IMX8MN_VAR_SOM_H
#define __IMX8MN_VAR_SOM_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
+#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-
-#define CONFIG_SPL_STACK 0x980000
-#define CONFIG_SPL_BSS_START_ADDR 0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h
index 6f36440b4f2..0bd407c8e8d 100644
--- a/include/configs/imx8mn_venice.h
+++ b/include/configs/imx8mn_venice.h
@@ -6,23 +6,7 @@
#ifndef __IMX8MM_VENICE_H
#define __IMX8MM_VENICE_H
-#include <asm/arch/imx-regs.h>
-#include <linux/sizes.h>
-
-#define CONFIG_SPL_MAX_SIZE (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_UBOOT_BASE \
- (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x980000
-#define CONFIG_SPL_BSS_START_ADDR 0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
-
-/* For RAW image gives a error info not panic */
-#endif
+#include <configs/imx8m.h>
#define MEM_LAYOUT_ENV_SETTINGS \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
--
2.36.0
