Add another mux option for UART5 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
---
arch/arm/dts/stm32mp15-pinctrl.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi
b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index dc329bf531e..6a5b4016f66 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1865,6 +1865,19 @@
};
};
+ uart5_pins_a: uart5-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */
+ bias-disable;
+ };
+ };
+
uart7_pins_a: uart7-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
--
2.35.1
