Hi Marek
On 6/13/22 11:55, Marek Vasut wrote:
> Add another mux option for UART5 pins, this is used on DRC Compact board.
>
> Signed-off-by: Marek Vasut <ma...@denx.de>
> Cc: Patrice Chotard <patrice.chot...@foss.st.com>
> Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
> ---
> arch/arm/dts/stm32mp15-pinctrl.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> index dc329bf531e..6a5b4016f66 100644
> --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> @@ -1865,6 +1865,19 @@
> };
> };
>
> + uart5_pins_a: uart5-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */
> + bias-disable;
> + };
> + };
> +
> uart7_pins_a: uart7-0 {
> pins1 {
> pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Thanks
Patrice
