Could you help us to get the DRAM part number which initialization failures on the Rock Pi 4+. We have found that some LPDDR4 abnormal operation at 50MHz. I think you can try that use 400MHz to detect capacity.
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index c0a06dcaed..810f9a98c9 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -2538,24 +2538,42 @@ static int lpddr4_set_ctl(struct dram_info *dram, return 0; } -static int lpddr4_set_rate(struct dram_info *dram, +static int lpddr4_set_rate_0(struct dram_info *dram, struct rk3399_sdram_params *params) { - u32 ctl_fn; + u32 ctl_fn = 0; u32 phy_fn; - for (ctl_fn = 0; ctl_fn < 2; ctl_fn++) { - phy_fn = lpddr4_get_phy_fn(params, ctl_fn); + phy_fn = lpddr4_get_phy_fn(params, ctl_fn); - lpddr4_set_phy(dram, params, phy_fn, &dfs_cfgs_lpddr4[ctl_fn]); - lpddr4_set_ctl(dram, params, ctl_fn, - dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq); + lpddr4_set_phy(dram, params, phy_fn, &dfs_cfgs_lpddr4[ctl_fn]); + lpddr4_set_ctl(dram, params, ctl_fn, + dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq); - if (IS_ENABLED(CONFIG_RAM_ROCKCHIP_DEBUG)) - printf("%s: change freq to %d mhz %d, %d\n", __func__, - dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq, - ctl_fn, phy_fn); - } + if (IS_ENABLED(CONFIG_RAM_ROCKCHIP_DEBUG)) + printf("%s: change freq to %d mhz %d, %d\n", __func__, + dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq, + ctl_fn, phy_fn); + + return 0; +} + +static int lpddr4_set_rate_1(struct dram_info *dram, + struct rk3399_sdram_params *params) +{ + u32 ctl_fn = 1; + u32 phy_fn; + + phy_fn = lpddr4_get_phy_fn(params, ctl_fn); + + lpddr4_set_phy(dram, params, phy_fn, &dfs_cfgs_lpddr4[ctl_fn]); + lpddr4_set_ctl(dram, params, ctl_fn, + dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq); + + if (IS_ENABLED(CONFIG_RAM_ROCKCHIP_DEBUG)) + printf("%s: change freq to %d mhz %d, %d\n", __func__, + dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq, + ctl_fn, phy_fn); return 0; } @@ -2955,6 +2973,11 @@ static int sdram_init(struct dram_info *dram, params->ch[ch].cap_info.rank = rank; } + #if defined(CONFIG_RAM_RK3399_LPDDR4) + lpddr4_set_rate_0(dram, params); + params->base.ddr_freq = dfs_cfgs_lpddr4[0].base.ddr_freq / MHz; + #endif + params->base.num_channels = 0; for (channel = 0; channel < 2; channel++) { const struct chan_info *chan = &dram->chan[channel]; @@ -3058,7 +3081,7 @@ static const struct sdram_rk3399_ops rk3399_ops = { .get_phy_index_params = get_phy_index_params, #else .data_training_first = lpddr4_mr_detect, - .set_rate_index = lpddr4_set_rate, + .set_rate_index = lpddr4_set_rate_1, .modify_param = lpddr4_modify_param, .get_phy_index_params = lpddr4_get_phy_index_params, #endif From: Lee Jones Date: 2022-06-17 03:15 To: u-boot; linux-rockchip CC: wxt; kever.yang; zhangqing; derrick.huang; chenjh; hisping.lin; typ; cwz; chenfen; jagan; sjg; cym; pgwipeout; adelva; rammuthiah Subject: Re: [Rock Pi 4+] Mainline LPDDR4 RAM initialisation is not sufficient to boot successfully On Wed, 25 May 2022, Lee Jones wrote: > Good afternoon, > > > > There appear to be a number of issues with the Rockchip rk3399 DDR RAM > > initialisation sequence in Mainline. Specifically, I'm seeing > > consistent failures on the Rock Pi 4+ during early boot. Can anyone from Rockchip help with this please? What does the binary blob [0] do differently to the U-boot implementation. Are you able to publish the source for the DDR binary blob? Please help me fix U-boot. [0] https://github.com/rockchip-linux/rkbin/blob/master/bin/rk33/rk3399_ddr_933MHz_v1.25.bin > A typical failure looks something like this: > > > > U-Boot TPL 2022.07-rc3-00005-g1b04a961c6 (May 25 2022 - 11:09:19) > > Channel 0: LPDDR4, 50MHz > > BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB > > Channel 1: col error > > Cap error! > > 256B stride > > lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > > lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > > Trying to boot from BOOTROM > > Returning to boot ROM... > > > > Even when the system boots to a terminal, which happens very > > infrequently, the LPDDR4 RAM chip at Channel 1 can have conflicting > > discovery information printed during TPL. The following 3 lines were > > printed during successive reboots using the same SD card with no > > changes: > > > > # Boot 1: > > BW=32 Col=9 Bk=4 CS0 Row=16/15 CS=1 Die BW=16 Size=384MB > > > > # Boot 2: > > BW=32 Col=10 Bk=4 CS0 Row=16/15 CS=1 Die BW=16 Size=768MB > > > > # Boot 3: > > BW=32 Col=10 Bk=4 CS0 Row=15 CS=1 Die BW=16 Size=512MB > > > > The story changes when I build the idbloader.img image with Rockchip's > > TBL (?) binary blob [0]. With that built in, presumably in place of > > the upstream TBL, both RAM chips are successfully enumerated and boot > > succeeds with 100% success rate: > > > > tools/mkimage -n rk3399 -T rksd -d \ > > rk3399_ddr_933MHz_v1.25.bin:spl/u-boot-spl.bin idbloader.img > > > > Another thing that is very different between the 2 is the initial > > frequency the LPDDR4 chips are clocked at. Using the upstream TBL > > version, the default is 50Mhz, which seems very low. If using the > > Rockchip supplied binary blob file, this is increased to a respectable > > 416MHz: > > > > # Mainline > > Channel 0: LPDDR4, 50MHz > > > > # Rockchip TBL blob > > Channel 0: LPDDR4,416MHz > > > > One thing I did try was to load in the 400Mhz configuration settings > > from drivers/ram/rockchip/sdram-rk3399-lpddr4-400.inc as the default > > initial values, instead of the 50MHz default taken from > > arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi, but this failed in a number > > of ways: > > > > Setting clock: Freq: 400MHz (400000000) > > Calling SDRAM init: 2 Channels > > Starting SDRAM initialization... > > mr5:0 mr12:0 mr14:0 > > Training failed for rank 2, ch 0 (ret: -22) > > mr5:0 mr12:0 mr14:0 > > Training failed for rank 1, ch 0 (ret: -22) > > mr5:0 mr12:0 mr14:0 > > Training failed for rank 2, ch 1 (ret: -22) > > mr5:0 mr12:0 mr14:0 > > Training failed for rank 1, ch 1 (ret: -22) > > Rank for Channel 1 is 0x0 > > Rank for Channel 0 is 0x0 > > Rank for Channel 1 is 0x0 > > sdram_init: LPDDR4 - 400MHz failed! > > rk3399_dmc_init DRAM init failed -22 > > > > So my question is; does Rockchip, or anyone else for that matter, have > > any plans on updating Mainline U-Boot with the upgraded/working LPDDR4 > > initialisation sequence? > > > > As ever, any information / help would be gratefully received. > > > > NB: If I have missed any critical people out from this discussion, > > please feel free to loop as many of them in as you see fit. > > > > Kind regards, > > Lee > > > > [0] > https://github.com/rockchip-linux/rkbin/blob/master/bin/rk33/rk3399_ddr_933MHz_v1.25.bin > -- Lee Jones [李琼斯] Principal Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog