From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Synchronise device tree with linux v5.19-rc5.
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
arch/arm/dts/imx8mm-beacon-baseboard.dtsi | 118 ++++
arch/arm/dts/imx8mm-data-modul-edm-sbc.dts | 3 +-
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 4 +-
arch/arm/dts/imx8mm-evk.dts | 2 +-
arch/arm/dts/imx8mm-evk.dtsi | 195 ++++--
arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts | 1 -
arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts | 1 -
arch/arm/dts/imx8mm-mx8menlo.dts | 51 +-
arch/arm/dts/imx8mm-pinfunc.h | 6 +-
arch/arm/dts/imx8mm-u-boot.dtsi | 10 +
arch/arm/dts/imx8mm-venice-gw700x.dtsi | 11 +-
arch/arm/dts/imx8mm-venice-gw71xx.dtsi | 56 +-
arch/arm/dts/imx8mm-venice-gw72xx.dtsi | 85 ++-
arch/arm/dts/imx8mm-venice-gw73xx.dtsi | 86 ++-
arch/arm/dts/imx8mm-venice-gw7901.dts | 126 ++--
arch/arm/dts/imx8mm-venice-gw7902.dts | 119 +++-
arch/arm/dts/imx8mm-venice-gw7903.dts | 5 +
arch/arm/dts/imx8mm.dtsi | 637 +++++++++++++------
include/dt-bindings/clock/imx8mm-clock.h | 9 +-
include/dt-bindings/power/imx8mm-power.h | 9 +
20 files changed, 1162 insertions(+), 372 deletions(-)
diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
index 4097a66163b..f338a886d81 100644
--- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
@@ -3,6 +3,8 @@
* Copyright 2020 Compass Electronics Group, LLC
*/
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
/ {
leds {
compatible = "gpio-leds";
@@ -34,6 +36,19 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ pcie0_refclk_gated: pcie0-refclk-gated {
+ compatible = "gpio-gate-clock";
+ clocks = <&pcie0_refclk>;
+ #clock-cells = <0>;
+ enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+ };
+
reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "3v3_aud";
@@ -54,6 +69,26 @@
enable-active-high;
};
+ reg_camera: regulator-camera {
+ compatible = "regulator-fixed";
+ regulator-name = "mipi_pwr";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100000>;
+ };
+
+ reg_pcie0: regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "pci_pwr_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pca6416_1 1 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100000>;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
@@ -78,6 +113,10 @@
};
};
+&csi {
+ status = "okay";
+};
+
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
@@ -101,6 +140,30 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ camera@3c {
+ compatible = "ovti,ov5640";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+ reg = <0x3c>;
+ clocks = <&clk IMX8MM_CLK_CLKO1>;
+ clock-names = "xclk";
+ assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+ assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+ assigned-clock-rates = <24000000>;
+ AVDD-supply = <®_camera>; /* 2.8v */
+ powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+ port {
+ /* MIPI CSI-2 bus endpoint */
+ ov5640_to_mipi_csi2: endpoint {
+ remote-endpoint = <&imx8mm_mipi_csi_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
};
&i2c4 {
@@ -152,6 +215,44 @@
};
};
+&mipi_csi {
+ status = "okay";
+ ports {
+ port@0 {
+ imx8mm_mipi_csi_in: endpoint {
+ remote-endpoint = <&ov5640_to_mipi_csi2>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,tx-deemph-gen1 = <0x2d>;
+ fsl,tx-deemph-gen2 = <0xf>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk_gated>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk_gated>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ vpcie-supply = <®_pcie0>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@@ -177,6 +278,7 @@
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clk IMX8MM_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ uart-has-rtscts;
status = "okay";
};
@@ -238,6 +340,14 @@
>;
};
+ pinctrl_ov5640: ov5640grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19
+ MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59
+ >;
+ };
+
pinctrl_pcal6414: pcal6414-gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19
@@ -250,6 +360,12 @@
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
@@ -271,6 +387,8 @@
fsl,pins = <
MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40
MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40
+ MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40
+ MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40
>;
};
diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
b/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
index 5b022040902..778bdbe228d 100644
--- a/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
@@ -35,7 +35,7 @@
brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
default-brightness-level = <7>;
enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
/* Disabled by default, unless display board plugged in. */
status = "disabled";
};
@@ -962,6 +962,7 @@
};
&usbotg2 {
+ disable-over-current;
dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi
b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
index e9fbf7b8021..36fbf56bc55 100644
--- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
@@ -105,11 +105,11 @@
u-boot,dm-spl;
};
-&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25} {
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} {
u-boot,dm-spl;
};
-&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25/regulators} {
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx8mm-evk.dts b/arch/arm/dts/imx8mm-evk.dts
index 4e2820d1924..a2b24d4d4e3 100644
--- a/arch/arm/dts/imx8mm-evk.dts
+++ b/arch/arm/dts/imx8mm-evk.dts
@@ -48,7 +48,7 @@
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
diff --git a/arch/arm/dts/imx8mm-evk.dtsi b/arch/arm/dts/imx8mm-evk.dtsi
index e7a2bd8a646..c42b966f7a6 100644
--- a/arch/arm/dts/imx8mm-evk.dtsi
+++ b/arch/arm/dts/imx8mm-evk.dtsi
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <dt-bindings/usb/pd.h>
#include "imx8mm.dtsi"
@@ -30,6 +31,23 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ reg_pcie0: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -42,9 +60,8 @@
};
backlight: backlight {
- status = "disabled";
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 255>;
num-interpolated-steps = <255>;
default-brightness-level = <250>;
@@ -125,6 +142,13 @@
reg = <0>;
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
+ qca,disable-smarteee;
+ vddio-supply = <&vddio>;
+
+ vddio: vddio-regulator {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
};
};
@@ -135,120 +159,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pmic: pca9450@25 {
- reg = <0x25>;
- compatible = "nxp,pca9450a";
- /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
- gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- pca9450,pmic-buck2-uses-i2c-dvs;
- /* Run/Standby voltage */
- pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>;
-
- buck1_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "buck1";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
- regulator-ramp-delay = <3125>;
+ regulator-ramp-delay = <1250>;
};
- buck2_reg: regulator@1 {
- reg = <1>;
- regulator-compatible = "buck2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
- regulator-ramp-delay = <3125>;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
};
- buck3_reg: regulator@2 {
- reg = <2>;
- regulator-compatible = "buck3";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ buck3_reg: BUCK3 {
+ // BUCK5 in datasheet
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
- buck4_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "buck4";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ buck4_reg: BUCK4 {
+ // BUCK6 in datasheet
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
- buck5_reg: regulator@4 {
- reg = <4>;
- regulator-compatible = "buck5";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ buck5_reg: BUCK5 {
+ // BUCK7 in datasheet
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
- buck6_reg: regulator@5 {
- reg = <5>;
- regulator-compatible = "buck6";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ buck6_reg: BUCK6 {
+ // BUCK8 in datasheet
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
- ldo1_reg: regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo1";
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
- ldo2_reg: regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo2";
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1150000>;
+ regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
- ldo3_reg: regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo3";
- regulator-min-microvolt = <800000>;
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
- ldo4_reg: regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
- ldo5_reg: regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
};
-
};
};
};
@@ -303,6 +322,30 @@
};
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,tx-deemph-gen1 = <0x2d>;
+ fsl,tx-deemph-gen2 = <0xf>;
+ clocks = <&pcie0_refclk>;
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ vpcie-supply = <®_pcie0>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@@ -328,6 +371,7 @@
srp-disable;
adp-disable;
usb-role-switch;
+ disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
@@ -362,7 +406,7 @@
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
- status = "disabled";
+ status = "okay";
};
&iomuxc {
@@ -425,6 +469,19 @@
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61
+ MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41
+ >;
+ };
+
+ pinctrl_pcie0_reg: pcie0reggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41
+ >;
+ };
+
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
diff --git a/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts
b/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts
index 5389d6f2beb..50274540284 100644
--- a/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts
+++ b/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts
@@ -91,7 +91,6 @@
max-frequency = <50000000>;
bus-width = <4>;
no-1-8-v;
- pm-ignore-notify;
keep-power-in-suspend;
status = "okay";
};
diff --git a/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts
b/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts
index a4a2ada1483..ddac8bc7ae6 100644
--- a/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts
+++ b/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts
@@ -91,7 +91,6 @@
max-frequency = <50000000>;
bus-width = <4>;
no-1-8-v;
- pm-ignore-notify;
keep-power-in-suspend;
status = "okay";
};
diff --git a/arch/arm/dts/imx8mm-mx8menlo.dts b/arch/arm/dts/imx8mm-mx8menlo.dts
index adfd8fd8cb6..92eaf4ef456 100644
--- a/arch/arm/dts/imx8mm-mx8menlo.dts
+++ b/arch/arm/dts/imx8mm-mx8menlo.dts
@@ -3,7 +3,9 @@
* Copyright 2021-2022 Marek Vasut <ma...@denx.de>
*/
-#include "imx8mm-verdin.dts"
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
/ {
model = "MENLO MX8MM EMBEDDED DEVICE";
@@ -37,6 +39,13 @@
pinctrl-0 = <&pinctrl_beeper>;
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
};
+
+ /* Fixed clock dedicated to SPI CAN on carrier board */
+ clk_xtal20: clk-xtal20 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ };
};
&ecspi1 {
@@ -50,13 +59,11 @@
/* CAN controller on the baseboard */
canfd: can@0 {
compatible = "microchip,mcp2518fd";
- clocks = <&clk20m>;
- gpio-controller;
+ clocks = <&clk_xtal20>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
reg = <0>;
spi-max-frequency = <2000000>;
- status = "okay";
};
};
@@ -64,7 +71,20 @@
&ecspi2 {
pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>;
- status = "disabled";
+ status = "okay";
+
+ spidev@0 {
+ compatible = "menlo,m53cpld";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+
+ spidev@1 {
+ compatible = "menlo,m53cpld";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+
};
ðphy0 {
@@ -158,30 +178,20 @@
status = "okay";
};
-&i2c1 {
- /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
- clock-frequency = <100000>;
-};
-
-&i2c2 {
- /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
- clock-frequency = <100000>;
+&hwmon {
+ status = "okay";
};
&i2c3 {
- /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
- clock-frequency = <100000>;
status = "okay";
};
&i2c4 {
- /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
- clock-frequency = <100000>;
+ /* None of this is present on the SoM. */
/delete-node/ bridge@2c;
- /delete-node/ hwmon@40;
/delete-node/ hdmi@48;
/delete-node/ touch@4a;
- /delete-node/ hwmontemp@4f;
+ /delete-node/ sensor@4f;
/delete-node/ eeprom@50;
/delete-node/ eeprom@57;
};
@@ -299,7 +309,6 @@
};
&uart2 {
- uart-has-rtscts;
status = "okay";
};
@@ -311,7 +320,7 @@
};
&usbotg1 {
- dr_mode = "gadget";
+ dr_mode = "peripheral";
status = "okay";
};
diff --git a/arch/arm/dts/imx8mm-pinfunc.h b/arch/arm/dts/imx8mm-pinfunc.h
index a7411c800be..83c8f715cd9 100644
--- a/arch/arm/dts/imx8mm-pinfunc.h
+++ b/arch/arm/dts/imx8mm-pinfunc.h
@@ -280,7 +280,7 @@
#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4
0x150 0x3B8 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC
0x150 0x3B8 0x4CC 0x2 0x1
#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK
0x150 0x3B8 0x4E8 0x3 0x0
-#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2
0x150 0x3B8 0x53c 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2
0x150 0x3B8 0x53C 0x4 0x0
#define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23
0x150 0x3B8 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3
0x154 0x3BC 0x4E0 0x0 0x0
#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5
0x154 0x3BC 0x000 0x1 0x0
@@ -487,7 +487,7 @@
#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC
0x1D8 0x440 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2
0x1D8 0x440 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1
0x1D8 0x440 0x4D8 0x2 0x2
-#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX
0x1D8 0x440 0x4Fc 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX
0x1D8 0x440 0x4FC 0x4 0x2
#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX
0x1D8 0x440 0x000 0x4 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31
0x1D8 0x440 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1
0x1D8 0x440 0x000 0x7 0x0
@@ -495,7 +495,7 @@
#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2
0x1DC 0x444 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2
0x1DC 0x444 0x4DC 0x2 0x2
#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX
0x1DC 0x444 0x000 0x4 0x0
-#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX
0x1DC 0x444 0x4Fc 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX
0x1DC 0x444 0x4FC 0x4 0x3
#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0
0x1DC 0x444 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2
0x1DC 0x444 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0
0x1E0 0x448 0x000 0x0 0x0
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 9f66cdb65a9..852d63a8aae 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -180,3 +180,13 @@
u-boot,dm-pre-reloc;
u-boot,dm-spl;
};
+
+&spba1 {
+ u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
+};
+
+&spba2 {
+ u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imx8mm-venice-gw700x.dtsi
b/arch/arm/dts/imx8mm-venice-gw700x.dtsi
index f182a816b57..00f86cada30 100644
--- a/arch/arm/dts/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw700x.dtsi
@@ -111,7 +111,8 @@
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
};
@@ -277,8 +278,6 @@
pmic@69 {
compatible = "mps,mp5416";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
reg = <0x69>;
regulators {
@@ -443,12 +442,6 @@
>;
};
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
- >;
- };
-
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
diff --git a/arch/arm/dts/imx8mm-venice-gw71xx.dtsi
b/arch/arm/dts/imx8mm-venice-gw71xx.dtsi
index 8e4a0ce9979..c557dbf4dcd 100644
--- a/arch/arm/dts/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw71xx.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
aliases {
@@ -33,6 +34,12 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
@@ -57,10 +64,24 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
+&gpio1 {
+ gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0",
+ "", "dio1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -87,6 +108,29 @@
status = "okay";
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+};
+
/* GPS */
&uart1 {
pinctrl-names = "default";
@@ -103,12 +147,14 @@
&usbotg1 {
dr_mode = "otg";
+ over-current-active-low;
vbus-supply = <®_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
+ disable-over-current;
status = "okay";
};
@@ -148,6 +194,12 @@
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41
+ >;
+ };
+
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
@@ -166,7 +218,7 @@
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
- MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
diff --git a/arch/arm/dts/imx8mm-venice-gw72xx.dtsi
b/arch/arm/dts/imx8mm-venice-gw72xx.dtsi
index b7c91bdc21d..41d0de6a702 100644
--- a/arch/arm/dts/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw72xx.dtsi
@@ -5,9 +5,11 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
aliases {
+ ethernet1 = ð1;
usb0 = &usbotg1;
usb1 = &usbotg2;
};
@@ -33,6 +35,12 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
@@ -76,10 +84,26 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
+&gpio1 {
+ gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+ "", "", "pci_usb_sel", "dio0",
+ "", "dio1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+ "mipi_gpio1", "", "", "pci_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -106,6 +130,55 @@
status = "okay";
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie@2,3 {
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth1: pcie@5,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+ };
+};
+
/* off-board header */
&sai3 {
pinctrl-names = "default";
@@ -139,12 +212,14 @@
&usbotg1 {
dr_mode = "otg";
+ over-current-active-low;
vbus-supply = <®_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
+ disable-over-current;
vbus-supply = <®_usb_otg2_vbus>;
status = "okay";
};
@@ -198,6 +273,12 @@
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41
+ >;
+ };
+
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
@@ -231,7 +312,7 @@
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
- MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
diff --git a/arch/arm/dts/imx8mm-venice-gw73xx.dtsi
b/arch/arm/dts/imx8mm-venice-gw73xx.dtsi
index d2ffd62a3bd..244ef8d6cc6 100644
--- a/arch/arm/dts/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw73xx.dtsi
@@ -5,9 +5,11 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
aliases {
+ ethernet1 = ð1;
usb0 = &usbotg1;
usb1 = &usbotg2;
};
@@ -33,6 +35,12 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
@@ -96,10 +104,26 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
+&gpio1 {
+ gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+ "", "", "pci_usb_sel", "dio0",
+ "", "dio1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+ "mipi_gpio1", "", "", "pci_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -126,6 +150,55 @@
status = "okay";
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie@2,4 {
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth1: pcie@6,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+ };
+};
+
/* off-board header */
&sai3 {
pinctrl-names = "default";
@@ -149,6 +222,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
bluetooth {
@@ -166,12 +240,14 @@
&usbotg1 {
dr_mode = "otg";
+ over-current-active-low;
vbus-supply = <®_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
+ disable-over-current;
vbus-supply = <®_usb_otg2_vbus>;
status = "okay";
};
@@ -241,6 +317,12 @@
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41
+ >;
+ };
+
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
@@ -280,7 +362,7 @@
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
- MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
diff --git a/arch/arm/dts/imx8mm-venice-gw7901.dts
b/arch/arm/dts/imx8mm-venice-gw7901.dts
index d5cdbb7f994..24737e89038 100644
--- a/arch/arm/dts/imx8mm-venice-gw7901.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7901.dts
@@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm.dtsi"
@@ -179,6 +180,12 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -255,6 +262,10 @@
};
};
+&disp_blk_ctrl {
+ status = "disabled";
+};
+
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
@@ -282,6 +293,37 @@
};
};
+&gpio1 {
+ gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
+ "", "uart1_rs232#", "dig1_in", "dig1_out",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "",
+ "", "", "uart3_rs232#", "uart3_rs422#",
+ "uart3_rs485#", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
+ "", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpu_2d {
+ status = "disabled";
+};
+
+&gpu_3d {
+ status = "disabled";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -296,8 +338,6 @@
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
@@ -577,6 +617,7 @@
pinctrl-0 = <&pinctrl_ksz>;
interrupt-parent = <&gpio4>;
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ phy-mode = "rgmii-id";
ports {
#address-cells = <1>;
@@ -586,32 +627,24 @@
reg = <0>;
label = "lan1";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy0>;
- phy-mode = "internal";
};
lan2: port@1 {
reg = <1>;
label = "lan2";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy1>;
- phy-mode = "internal";
};
lan3: port@2 {
reg = <2>;
label = "lan3";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy2>;
- phy-mode = "internal";
};
lan4: port@3 {
reg = <3>;
label = "lan4";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy3>;
- phy-mode = "internal";
};
port@5 {
@@ -626,34 +659,6 @@
};
};
};
-
- mdios {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio@0 {
- reg = <0>;
- compatible = "microchip,ksz-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sw_phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
-
- sw_phy1: ethernet-phy@1 {
- reg = <0x1>;
- };
-
- sw_phy2: ethernet-phy@2 {
- reg = <0x2>;
- };
-
- sw_phy3: ethernet-phy@3 {
- reg = <0x3>;
- };
- };
- };
};
crypto@60 {
@@ -669,6 +674,41 @@
status = "okay";
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+};
+
+&pgc_gpu {
+ status = "disabled";
+};
+
+&pgc_gpumix {
+ status = "disabled";
+};
+
+&pgc_mipi {
+ status = "disabled";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
@@ -677,6 +717,7 @@
dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -692,6 +733,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -700,6 +742,7 @@
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -833,6 +876,13 @@
>;
};
+ pinctrl_pcie0: pciegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x40000041 /*
WDIS# */
+ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x41
+ >;
+ };
+
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41
diff --git a/arch/arm/dts/imx8mm-venice-gw7902.dts
b/arch/arm/dts/imx8mm-venice-gw7902.dts
index b0404ec4c8a..407ab4592b4 100644
--- a/arch/arm/dts/imx8mm-venice-gw7902.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7902.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm.dtsi"
@@ -17,6 +18,7 @@
compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
aliases {
+ ethernet1 = ð1;
usb0 = &usbotg1;
usb1 = &usbotg2;
};
@@ -128,6 +130,12 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
@@ -141,12 +149,13 @@
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
reg_usb1_vbus: regulator-usb1 {
+ compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1>;
- compatible = "regulator-fixed";
regulator-name = "usb_usb1_vbus";
gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
@@ -155,9 +164,9 @@
};
reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_wl>;
- compatible = "regulator-fixed";
regulator-name = "wifi";
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
@@ -243,18 +252,51 @@
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
- /* TI DP83867 props */
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- /* GPY111 props */
- rx-internal-delay-ps = <2000>;
- tx-internal-delay-ps = <2500>;
};
};
};
+&gpio1 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "m2_reset", "", "m2_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "uart2_en#", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
+ "", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485",
+ "", "uart1_term", "uart1_half", "app_gpio2",
+ "mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "mipi_gpio4",
+ "mipi_gpio3", "mipi_gpio2", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -530,20 +572,15 @@
status = "okay";
accelerometer@19 {
+ compatible = "st,lis2de12";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
- compatible = "st,lis2de12";
reg = <0x19>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio1>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
-
- secure-element@60 {
- compatible = "nxp,se050";
- reg = <0x60>;
- };
};
/* off-board header */
@@ -562,6 +599,43 @@
status = "okay";
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth1: pcie@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+};
+
/* off-board header */
&sai3 {
pinctrl-names = "default";
@@ -578,6 +652,7 @@
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -594,6 +669,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
bluetooth {
@@ -611,6 +687,7 @@
dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -662,7 +739,7 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /*
M2_GDIS# */
- MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /*
M2_RST# */
+ MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /*
M2_RESET */
MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /*
M2_OFF# */
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /*
M2_WDIS# */
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /*
AMP GPIO1 */
@@ -744,11 +821,17 @@
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
- MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x40000019
- MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x40000019
- MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x40000019
- MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x40000019
- MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000019
+ MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
+ MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
+ MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
+ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
+ >;
+ };
+
+ pinctrl_pcie0: pciegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x41
>;
};
diff --git a/arch/arm/dts/imx8mm-venice-gw7903.dts
b/arch/arm/dts/imx8mm-venice-gw7903.dts
index 9c67a381b77..a7dae9bd4c1 100644
--- a/arch/arm/dts/imx8mm-venice-gw7903.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7903.dts
@@ -540,6 +540,7 @@
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
@@ -558,6 +559,10 @@
status = "okay";
};
+&pgc_mipi {
+ status = "disabled";
+};
+
/* off-board RS232/RS485/RS422 */
&uart1 {
pinctrl-names = "default";
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
index 724f6ddbf39..1bf07047382 100644
--- a/arch/arm/dts/imx8mm.dtsi
+++ b/arch/arm/dts/imx8mm.dtsi
@@ -4,11 +4,11 @@
*/
#include <dt-bindings/clock/imx8mm-clock.h>
-#include <dt-bindings/power/imx8mm-power.h>
-#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8mm-pinfunc.h"
@@ -65,6 +65,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
nvmem-cells = <&cpu_speed_grade>;
@@ -80,6 +86,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@@ -93,6 +105,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@@ -106,6 +124,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@@ -114,6 +138,10 @@
A53_L2: l2-cache0 {
compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
@@ -194,10 +222,9 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
timer {
@@ -261,10 +288,13 @@
};
soc@0 {
- compatible = "simple-bus";
+ compatible = "fsl,imx8mm-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+ nvmem-cells = <&imx8mm_uid>;
+ nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -273,117 +303,125 @@
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
- sai1: sai@30010000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30010000 0x10000>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
- <&clk IMX8MM_CLK_SAI1_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ spba2: spba-bus@30000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x100000>;
+ ranges;
+
+ sai1: sai@30010000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai",
"fsl,imx8mq-sai";
+ reg = <0x30010000 0x10000>;
+ interrupts = <GIC_SPI 95
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+ <&clk IMX8MM_CLK_SAI1_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2",
"mclk3";
+ dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai2: sai@30020000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30020000 0x10000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
- <&clk IMX8MM_CLK_SAI2_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai2: sai@30020000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai",
"fsl,imx8mq-sai";
+ reg = <0x30020000 0x10000>;
+ interrupts = <GIC_SPI 96
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+ <&clk IMX8MM_CLK_SAI2_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2",
"mclk3";
+ dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai3: sai@30030000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30030000 0x10000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
- <&clk IMX8MM_CLK_SAI3_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai3: sai@30030000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai",
"fsl,imx8mq-sai";
+ reg = <0x30030000 0x10000>;
+ interrupts = <GIC_SPI 50
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+ <&clk IMX8MM_CLK_SAI3_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2",
"mclk3";
+ dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai5: sai@30050000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30050000 0x10000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
- <&clk IMX8MM_CLK_SAI5_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai5: sai@30050000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai",
"fsl,imx8mq-sai";
+ reg = <0x30050000 0x10000>;
+ interrupts = <GIC_SPI 90
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+ <&clk IMX8MM_CLK_SAI5_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2",
"mclk3";
+ dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai6: sai@30060000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30060000 0x10000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
- <&clk IMX8MM_CLK_SAI6_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai6: sai@30060000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai",
"fsl,imx8mq-sai";
+ reg = <0x30060000 0x10000>;
+ interrupts = <GIC_SPI 90
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+ <&clk IMX8MM_CLK_SAI6_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk
IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2",
"mclk3";
+ dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- micfil: audio-controller@30080000 {
- compatible = "fsl,imx8mm-micfil";
- reg = <0x30080000 0x10000>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_PDM_IPG>,
- <&clk IMX8MM_CLK_PDM_ROOT>,
- <&clk IMX8MM_AUDIO_PLL1_OUT>,
- <&clk IMX8MM_AUDIO_PLL2_OUT>,
- <&clk IMX8MM_CLK_EXT3>;
- clock-names = "ipg_clk", "ipg_clk_app",
- "pll8k", "pll11k", "clkext3";
- dmas = <&sdma2 24 25 0x80000000>;
- dma-names = "rx";
- status = "disabled";
- };
+ micfil: audio-controller@30080000 {
+ compatible = "fsl,imx8mm-micfil";
+ reg = <0x30080000 0x10000>;
+ interrupts = <GIC_SPI 109
IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110
IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44
IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+ <&clk IMX8MM_CLK_PDM_ROOT>,
+ <&clk IMX8MM_AUDIO_PLL1_OUT>,
+ <&clk IMX8MM_AUDIO_PLL2_OUT>,
+ <&clk IMX8MM_CLK_EXT3>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k",
"clkext3";
+ dmas = <&sdma2 24 25 0x80000000>;
+ dma-names = "rx";
+ status = "disabled";
+ };
- spdif1: spdif@30090000 {
- compatible = "fsl,imx35-spdif";
- reg = <0x30090000 0x10000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
- <&clk IMX8MM_CLK_24M>, /* rxtx0 */
- <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
- <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5
*/
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
- <&clk IMX8MM_CLK_DUMMY>; /* spba */
- clock-names = "core", "rxtx0",
- "rxtx1", "rxtx2",
- "rxtx3", "rxtx4",
- "rxtx5", "rxtx6",
- "rxtx7", "spba";
- dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
- dma-names = "rx", "tx";
- status = "disabled";
+ spdif1: spdif@30090000 {
+ compatible = "fsl,imx35-spdif";
+ reg = <0x30090000 0x10000>;
+ interrupts = <GIC_SPI 6
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_AUDIO_AHB>,
/* core */
+ <&clk IMX8MM_CLK_24M>, /*
rxtx0 */
+ <&clk IMX8MM_CLK_SPDIF1>, /*
rxtx1 */
+ <&clk IMX8MM_CLK_DUMMY>, /*
rxtx2 */
+ <&clk IMX8MM_CLK_DUMMY>, /*
rxtx3 */
+ <&clk IMX8MM_CLK_DUMMY>, /*
rxtx4 */
+ <&clk IMX8MM_CLK_AUDIO_AHB>,
/* rxtx5 */
+ <&clk IMX8MM_CLK_DUMMY>, /*
rxtx6 */
+ <&clk IMX8MM_CLK_DUMMY>, /*
rxtx7 */
+ <&clk IMX8MM_CLK_DUMMY>; /*
spba */
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ dmas = <&sdma2 28 18 0>, <&sdma2 29 18
0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
};
gpio1: gpio@30200000 {
@@ -522,9 +560,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mm_uid: unique-id@410 {
+ reg = <0x4 0x8>;
+ };
+
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ fec_mac_address: mac-address@90 {
+ reg = <0x90 6>;
+ };
};
anatop: anatop@30360000 {
@@ -573,8 +619,7 @@
<&clk
IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
<&clk IMX8MM_VIDEO_PLL1>,
- <&clk IMX8MM_AUDIO_PLL1>,
- <&clk IMX8MM_AUDIO_PLL2>;
+ <&clk IMX8MM_AUDIO_PLL1>;
assigned-clock-parents = <&clk
IMX8MM_SYS_PLL1_800M>,
<&clk
IMX8MM_ARM_PLL_OUT>,
<&clk
IMX8MM_SYS_PLL3_OUT>,
@@ -584,8 +629,7 @@
<400000000>,
<750000000>,
<594000000>,
- <393216000>,
- <361267200>;
+ <393216000>;
};
src: reset-controller@30390000 {
@@ -598,6 +642,7 @@
gpc: gpc@303a0000 {
compatible = "fsl,imx8mm-gpc";
reg = <0x303a0000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <3>;
@@ -610,12 +655,15 @@
#power-domain-cells = <0>;
reg =
<IMX8MM_POWER_DOMAIN_HSIOMIX>;
clocks = <&clk
IMX8MM_CLK_USB_BUS>;
+ assigned-clocks = <&clk
IMX8MM_CLK_USB_BUS>;
+ assigned-clock-parents = <&clk
IMX8MM_SYS_PLL2_500M>;
};
pgc_pcie: power-domain@1 {
#power-domain-cells = <0>;
reg =
<IMX8MM_POWER_DOMAIN_PCIE>;
power-domains = <&pgc_hsiomix>;
+ clocks = <&clk
IMX8MM_CLK_PCIE1_ROOT>;
};
pgc_otg1: power-domain@2 {
@@ -634,32 +682,63 @@
#power-domain-cells = <0>;
reg =
<IMX8MM_POWER_DOMAIN_GPUMIX>;
clocks = <&clk
IMX8MM_CLK_GPU_BUS_ROOT>,
- <&clk
IMX8MM_CLK_GPU_AHB>;
+ <&clk
IMX8MM_CLK_GPU_AHB>;
+ assigned-clocks = <&clk
IMX8MM_CLK_GPU_AXI>,
+ <&clk
IMX8MM_CLK_GPU_AHB>;
+ assigned-clock-parents = <&clk
IMX8MM_SYS_PLL1_800M>,
+ <&clk
IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates =
<800000000>, <400000000>;
};
pgc_gpu: power-domain@5 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_GPU>;
clocks = <&clk
IMX8MM_CLK_GPU_AHB>,
- <&clk
IMX8MM_CLK_GPU_BUS_ROOT>,
- <&clk
IMX8MM_CLK_GPU2D_ROOT>,
- <&clk
IMX8MM_CLK_GPU3D_ROOT>;
+ <&clk
IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk
IMX8MM_CLK_GPU2D_ROOT>,
+ <&clk
IMX8MM_CLK_GPU3D_ROOT>;
resets = <&src
IMX8MQ_RESET_GPU_RESET>;
power-domains = <&pgc_gpumix>;
};
- dispmix_pd: power-domain@10 {
+ pgc_vpumix: power-domain@6 {
+ #power-domain-cells = <0>;
+ reg =
<IMX8MM_POWER_DOMAIN_VPUMIX>;
+ clocks = <&clk
IMX8MM_CLK_VPU_DEC_ROOT>;
+ assigned-clocks = <&clk
IMX8MM_CLK_VPU_BUS>;
+ assigned-clock-parents = <&clk
IMX8MM_SYS_PLL1_800M>;
+ };
+
+ pgc_vpu_g1: power-domain@7 {
+ #power-domain-cells = <0>;
+ reg =
<IMX8MM_POWER_DOMAIN_VPUG1>;
+ };
+
+ pgc_vpu_g2: power-domain@8 {
+ #power-domain-cells = <0>;
+ reg =
<IMX8MM_POWER_DOMAIN_VPUG2>;
+ };
+
+ pgc_vpu_h1: power-domain@9 {
+ #power-domain-cells = <0>;
+ reg =
<IMX8MM_POWER_DOMAIN_VPUH1>;
+ };
+
+ pgc_dispmix: power-domain@10 {
#power-domain-cells = <0>;
reg =
<IMX8MM_POWER_DOMAIN_DISPMIX>;
- clocks = <&clk
IMX8MM_CLK_DISP_ROOT>,
- <&clk
IMX8MM_CLK_DISP_AXI_ROOT>,
- <&clk
IMX8MM_CLK_DISP_APB_ROOT>;
+ clocks = <&clk
IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk
IMX8MM_CLK_DISP_AXI_ROOT>;
+ assigned-clocks = <&clk
IMX8MM_CLK_DISP_AXI>,
+ <&clk
IMX8MM_CLK_DISP_APB>;
+ assigned-clock-parents = <&clk
IMX8MM_SYS_PLL2_1000M>,
+ <&clk
IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates =
<500000000>, <200000000>;
};
- mipi_pd: power-domain@11 {
+ pgc_mipi: power-domain@11 {
#power-domain-cells = <0>;
reg =
<IMX8MM_POWER_DOMAIN_MIPI>;
- power-domains = <&dispmix_pd>;
};
};
};
@@ -679,7 +758,7 @@
clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
<&clk IMX8MM_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -690,7 +769,7 @@
clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
<&clk IMX8MM_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -701,7 +780,7 @@
clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
<&clk IMX8MM_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -712,7 +791,7 @@
clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
<&clk IMX8MM_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -733,80 +812,88 @@
ranges = <0x30800000 0x30800000 0x400000>,
<0x8000000 0x8000000 0x10000000>;
- ecspi1: spi@30820000 {
- compatible = "fsl,imx8mm-ecspi",
"fsl,imx51-ecspi";
+ spba1: spba-bus@30800000 {
+ compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30820000 0x10000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
- <&clk IMX8MM_CLK_ECSPI1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ #size-cells = <1>;
+ reg = <0x30800000 0x100000>;
+ ranges;
- ecspi2: spi@30830000 {
- compatible = "fsl,imx8mm-ecspi",
"fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30830000 0x10000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
- <&clk IMX8MM_CLK_ECSPI2_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi1: spi@30820000 {
+ compatible = "fsl,imx8mm-ecspi",
"fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- ecspi3: spi@30840000 {
- compatible = "fsl,imx8mm-ecspi",
"fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30840000 0x10000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
- <&clk IMX8MM_CLK_ECSPI3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi2: spi@30830000 {
+ compatible = "fsl,imx8mm-ecspi",
"fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart1: serial@30860000 {
- compatible = "fsl,imx8mm-uart",
"fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
- <&clk IMX8MM_CLK_UART1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi3: spi@30840000 {
+ compatible = "fsl,imx8mm-ecspi",
"fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart3: serial@30880000 {
- compatible = "fsl,imx8mm-uart",
"fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
- <&clk IMX8MM_CLK_UART3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ uart1: serial@30860000 {
+ compatible = "fsl,imx8mm-uart",
"fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+ <&clk IMX8MM_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart2: serial@30890000 {
- compatible = "fsl,imx8mm-uart",
"fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
- <&clk IMX8MM_CLK_UART2_ROOT>;
- clock-names = "ipg", "per";
- status = "disabled";
+ uart3: serial@30880000 {
+ compatible = "fsl,imx8mm-uart",
"fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+ <&clk IMX8MM_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx8mm-uart",
"fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27
IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+ <&clk IMX8MM_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
};
crypto: crypto@30900000 {
@@ -950,7 +1037,7 @@
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
<&clk IMX8MM_CLK_QSPI_ROOT>;
- clock-names = "fspi", "fspi_en";
+ clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -966,7 +1053,7 @@
};
fec1: ethernet@30be0000 {
- compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
+ compatible = "fsl,imx8mm-fec",
"fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -982,13 +1069,17 @@
assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
<&clk IMX8MM_CLK_ENET_TIMER>,
<&clk IMX8MM_CLK_ENET_REF>,
- <&clk IMX8MM_CLK_ENET_TIMER>;
+ <&clk
IMX8MM_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk
IMX8MM_SYS_PLL1_266M>,
<&clk
IMX8MM_SYS_PLL2_100M>,
- <&clk
IMX8MM_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <0>, <125000000>,
<100000000>;
+ <&clk
IMX8MM_SYS_PLL2_125M>,
+ <&clk
IMX8MM_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>,
<125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&fec_mac_address>;
+ nvmem-cell-names = "mac-address";
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
@@ -1001,6 +1092,84 @@
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
+ csi: csi@32e20000 {
+ compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
+ reg = <0x32e20000 0x1000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+ clock-names = "mclk";
+ power-domains = <&disp_blk_ctrl
IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
+ status = "disabled";
+
+ port {
+ csi_in: endpoint {
+ remote-endpoint =
<&imx8mm_mipi_csi_out>;
+ };
+ };
+ };
+
+ disp_blk_ctrl: blk-ctrl@32e28000 {
+ compatible = "fsl,imx8mm-disp-blk-ctrl",
"syscon";
+ reg = <0x32e28000 0x100>;
+ power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+ <&pgc_dispmix>, <&pgc_mipi>,
+ <&pgc_mipi>;
+ power-domain-names = "bus", "csi-bridge",
+ "lcdif", "mipi-dsi",
+ "mipi-csi";
+ clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_CSI1_ROOT>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_DISP_ROOT>,
+ <&clk IMX8MM_CLK_DSI_CORE>,
+ <&clk IMX8MM_CLK_DSI_PHY_REF>,
+ <&clk IMX8MM_CLK_CSI1_CORE>,
+ <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+ clock-names = "csi-bridge-axi","csi-bridge-apb",
+ "csi-bridge-core", "lcdif-axi",
+ "lcdif-apb", "lcdif-pix",
+ "dsi-pclk", "dsi-ref",
+ "csi-aclk", "csi-pclk";
+ #power-domain-cells = <1>;
+ };
+
+ mipi_csi: mipi-csi@32e30000 {
+ compatible = "fsl,imx8mm-mipi-csi2";
+ reg = <0x32e30000 0x1000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
+ <&clk
IMX8MM_CLK_CSI1_PHY_REF>;
+ assigned-clock-parents = <&clk
IMX8MM_SYS_PLL2_1000M>,
+ <&clk
IMX8MM_SYS_PLL2_1000M>;
+ clock-frequency = <333000000>;
+ clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_CSI1_ROOT>,
+ <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+ clock-names = "pclk", "wrap", "phy", "axi";
+ power-domains = <&disp_blk_ctrl
IMX8MM_DISPBLK_PD_MIPI_CSI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ imx8mm_mipi_csi_out: endpoint {
+ remote-endpoint =
<&csi_in>;
+ };
+ };
+ };
+ };
+
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
reg = <0x32e40000 0x200>;
@@ -1116,6 +1285,72 @@
status = "disabled";
};
+ gpu_3d: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU3D_ROOT>,
+ <&clk IMX8MM_CLK_GPU3D_ROOT>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-rates = <0>, <1000000000>;
+ power-domains = <&pgc_gpu>;
+ };
+
+ gpu_2d: gpu@38008000 {
+ compatible = "vivante,gc";
+ reg = <0x38008000 0x8000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU2D_ROOT>;
+ clock-names = "reg", "bus", "core";
+ assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-rates = <0>, <1000000000>;
+ power-domains = <&pgc_gpu>;
+ };
+
+ vpu_g1: video-codec@38300000 {
+ compatible = "nxp,imx8mm-vpu-g1";
+ reg = <0x38300000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+ };
+
+ vpu_g2: video-codec@38310000 {
+ compatible = "nxp,imx8mq-vpu-g2";
+ reg = <0x38310000 0x10000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+ };
+
+ vpu_blk_ctrl: blk-ctrl@38330000 {
+ compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+ reg = <0x38330000 0x100>;
+ power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+ <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+ power-domain-names = "bus", "g1", "g2", "h1";
+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+ <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+ <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+ clock-names = "g1", "g2", "h1";
+ assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+ <&clk IMX8MM_CLK_VPU_G2>;
+ assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+ <&clk IMX8MM_VPU_PLL_OUT>;
+ assigned-clock-rates = <600000000>,
+ <600000000>;
+ #power-domain-cells = <1>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
diff --git a/include/dt-bindings/clock/imx8mm-clock.h
b/include/dt-bindings/clock/imx8mm-clock.h
index e63a5530aed..1f768b2eeb1 100644
--- a/include/dt-bindings/clock/imx8mm-clock.h
+++ b/include/dt-bindings/clock/imx8mm-clock.h
@@ -274,6 +274,13 @@
#define IMX8MM_CLK_A53_CORE 251
-#define IMX8MM_CLK_END 252
+#define IMX8MM_CLK_CLKOUT1_SEL 252
+#define IMX8MM_CLK_CLKOUT1_DIV 253
+#define IMX8MM_CLK_CLKOUT1 254
+#define IMX8MM_CLK_CLKOUT2_SEL 255
+#define IMX8MM_CLK_CLKOUT2_DIV 256
+#define IMX8MM_CLK_CLKOUT2 257
+
+#define IMX8MM_CLK_END 258
#endif
diff --git a/include/dt-bindings/power/imx8mm-power.h
b/include/dt-bindings/power/imx8mm-power.h
index fc9c2e16aad..648938f24c8 100644
--- a/include/dt-bindings/power/imx8mm-power.h
+++ b/include/dt-bindings/power/imx8mm-power.h
@@ -19,4 +19,13 @@
#define IMX8MM_POWER_DOMAIN_DISPMIX 10
#define IMX8MM_POWER_DOMAIN_MIPI 11
+#define IMX8MM_VPUBLK_PD_G1 0
+#define IMX8MM_VPUBLK_PD_G2 1
+#define IMX8MM_VPUBLK_PD_H1 2
+
+#define IMX8MM_DISPBLK_PD_CSI_BRIDGE 0
+#define IMX8MM_DISPBLK_PD_LCDIF 1
+#define IMX8MM_DISPBLK_PD_MIPI_DSI 2
+#define IMX8MM_DISPBLK_PD_MIPI_CSI 3
+
#endif
--
2.35.1
