From: Quentin Schulz <quentin.sch...@theobroma-systems.com> Chances are when one boots U-Boot proper from a given storage medium, they want the same medium to be used to load and store the environment.
This basically allows to have completely separate U-Boot (TPL/SPL/U-Boot proper/environment) per storage medium which is convenient when working with recovery from SD-Card as one would just need to insert a properly configured SD-Card into the device to have access to their whole debug setup. No fallback mechanism is provided as to not dirty other storage medium environment by mistake. However, since arch_env_get_location() is called by env_init() which is part of the pre-relocation process, a valid, non-ENVL_UNKNOWN, value shall be returned otherwise the relocation fails with the following message: initcall sequence 00000000002866c0 failed at call 0000000000256b34 (err=-19) This valid, non-ENVL_UNKNOWN, value is ENVL_NOWHERE which requires to always select CONFIG_ENV_IS_NOWHERE otherwise this work-around does not work. Cc: Quentin Schulz <foss+ub...@0leil.net> Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com> --- Depends on https://lore.kernel.org/u-boot/20220715151552.953654-1-foss+ub...@0leil.net/ https://lore.kernel.org/u-boot/20220715151552.953654-2-foss+ub...@0leil.net/ .../puma_rk3399/puma-rk3399.c | 37 +++++++++++++++++++ configs/puma-rk3399_defconfig | 1 + 2 files changed, 38 insertions(+) diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index 5e5e58c88e..7ef4bac24b 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -6,6 +6,7 @@ #include <common.h> #include <dm.h> #include <env.h> +#include <env_internal.h> #include <init.h> #include <log.h> #include <misc.h> @@ -135,6 +136,42 @@ int mmc_get_env_dev(void) return CONFIG_SYS_MMC_ENV_DEV; } +#if !IS_ENABLED(CONFIG_ENV_IS_NOWHERE) +#error Please enable CONFIG_ENV_IS_NOWHERE +#endif + +enum env_location arch_env_get_location(enum env_operation op, int prio) +{ + const char *boot_device = + ofnode_read_chosen_string("u-boot,spl-boot-device"); + + if (prio > 0) + return ENVL_UNKNOWN; + + if (!boot_device) { + debug("%s: /chosen/u-boot,spl-boot-device not set\n", + __func__); + return ENVL_NOWHERE; + } + + debug("%s: booted from %s\n", __func__, boot_device); + + if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) && + !strcmp(boot_device, "/spi@ff1d0000/flash@0")) + return ENVL_SPI_FLASH; + + if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) && + (!strcmp(boot_device, "/mmc@fe320000") || + !strcmp(boot_device, "/mmc@fe330000"))) + return ENVL_MMC; + + printf("%s: No environment available: booted from %s but U-Boot " + "config does not allow loading environment from it.", + __func__, boot_device); + + return ENVL_NOWHERE; +} + int misc_init_r(void) { const u32 cpuid_offset = 0x7; diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 87d7e4f57c..e218532d70 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -44,6 +44,7 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SPI_MAX_HZ=50000000 -- 2.37.1