Hi all, Gentle ping on the series.
Cheers, Quentin On 7/22/22 11:30, Quentin Schulz wrote:
From: Quentin Schulz <quentin.sch...@theobroma-systems.com> The check to perform is on CONFIG_SPL_DM_REGULATOR and not SPL_DM_REGULATOR. Also switch to in-code check instead of ifdefs. Fixes: 07586ee4322a ("rockchip: rk3399: Support common spl_board_init") Cc: Quentin Schulz <foss+ub...@0leil.net> Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com> --- v2: - use IS_ENABLED checks, arch/arm/mach-rockchip/rk3399/rk3399.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 01a05599cd..8205511c25 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -275,13 +275,14 @@ void spl_board_init(void) rk3399_force_power_on_reset(); #endif-#if defined(SPL_DM_REGULATOR)- /* - * Turning the eMMC and SPI back on (if disabled via the Qseven - * BIOS_ENABLE) signal is done through a always-on regulator). - */ - if (regulators_enable_boot_on(false)) - debug("%s: Cannot enable boot on regulator\n", __func__); -#endif + if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) { + /* + * Turning the eMMC and SPI back on (if disabled via the Qseven + * BIOS_ENABLE) signal is done through a always-on regulator). + */ + if (regulators_enable_boot_on(false)) + debug("%s: Cannot enable boot on regulator\n", + __func__); + } } #endif
