Hi Stefan, On Mon, Aug 29, 2022 at 5:50 AM Pali Rohár <p...@kernel.org> wrote: > > On Monday 29 August 2022 14:07:29 Stefan Roese wrote: > > Hi Michael, Pali, Tony & all, > > > > On 24.08.22 09:35, Michael Walle wrote: > > > Hi, > > > > > > > On 24.08.22 00:33, Pali Rohár wrote: > > > > > Hello Stefan! Now when U-Boot contains new orion-timer.c driver, which > > > > > Michael wrote, I think that it mvebu platform should switch to use it. > > > > > Because build process for armada boards prints deprecation warning > > > > > that > > > > > new timer is not being used. Could you look at it, if it is possible > > > > > to > > > > > do global switch for mach-mvebu and mach-kirkwood? I think it does not > > > > > make sense to do per-board switching as it is de-facto platform > > > > > related > > > > > code. > > > > > > > > Yes, I also though about this. > > > > > > > > But... > > > > > > > > In Linux we have 2 different timer clocksource drivers for Orion / > > > > Kirkwood and Armada XP / 370 etc: > > > > > > > > drivers/clocksource/timer-orion.c > > > > drivers/clocksource/timer-armada-370-xp.c > > > > > > > > I did not check, if and why this is necessary to handle those chips > > > > via different drivers yet. Perhaps later this week. Or someone of > > > > you beats me with this. ;) > > > > > > One thing which is definitely missing is > > > https://elixir.bootlin.com/u-boot/v2022.10-rc3/source/arch/arm/mach-mvebu/timer.c#L33 > > > > > > I didn't bother to handle that one. And of course all the compatibles are > > > missing. > > > > Thanks. Just a short status update: > > > > I'm currently busy with this CONFIG_TIMER migration for MVEBU / > > Kirkwood. Looks good so far - I can only test on Armada XP right now. > > So I need some extensive testing on all other kind of Marvell 32bit > > users / developers. I expect to send the first draft patchset in a few > > days. > > > > Thanks, > > Stefan > > I will test it on Turris Omnia - A385.
I will test it on a few Kirkwood boards (88F6281, 88F6282, 88F6192). Please let us know if you have any particular suggestion for a good test. Best, Tony