As there is no Orion5 based target in mainline U-Boot any more, let's
completely remove the support for this pretty old Marvell platform.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Tony Dinh <mibo...@gmail.com>
Cc: Pali Rohár <p...@kernel.org>
Cc: Michael Walle <mich...@walle.cc>
---
arch/arm/Kconfig | 9 -
arch/arm/Makefile | 1 -
arch/arm/mach-orion5x/Kconfig | 13 -
arch/arm/mach-orion5x/Makefile | 26 --
arch/arm/mach-orion5x/cpu.c | 298 ------------------
arch/arm/mach-orion5x/dram.c | 58 ----
arch/arm/mach-orion5x/include/mach/cpu.h | 242 --------------
.../arm/mach-orion5x/include/mach/mv88f5182.h | 23 --
arch/arm/mach-orion5x/include/mach/orion5x.h | 66 ----
arch/arm/mach-orion5x/lowlevel_init.S | 286 -----------------
arch/arm/mach-orion5x/timer.c | 174 ----------
arch/arm/mach-orion5x/u-boot-spl.lds | 60 ----
drivers/i2c/mvtwsi.c | 4 +-
drivers/net/Kconfig | 2 +-
drivers/net/mvgbe.c | 2 -
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ehci-marvell.c | 2 -
include/configs/mv-common.h | 1 -
18 files changed, 3 insertions(+), 1266 deletions(-)
delete mode 100644 arch/arm/mach-orion5x/Kconfig
delete mode 100644 arch/arm/mach-orion5x/Makefile
delete mode 100644 arch/arm/mach-orion5x/cpu.c
delete mode 100644 arch/arm/mach-orion5x/dram.c
delete mode 100644 arch/arm/mach-orion5x/include/mach/cpu.h
delete mode 100644 arch/arm/mach-orion5x/include/mach/mv88f5182.h
delete mode 100644 arch/arm/mach-orion5x/include/mach/orion5x.h
delete mode 100644 arch/arm/mach-orion5x/lowlevel_init.S
delete mode 100644 arch/arm/mach-orion5x/timer.c
delete mode 100644 arch/arm/mach-orion5x/u-boot-spl.lds
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 60f524a2d118..206e34412b3e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -637,13 +637,6 @@ config ARCH_MVEBU
select SPI
imply CMD_DM
-config ARCH_ORION5X
- bool "Marvell Orion"
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select SPL_SEPARATE_BSS if SPL
- select TIMER
-
config TARGET_STV0991
bool "Support stv0991"
select CPU_V7A
@@ -2246,8 +2239,6 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
-source "arch/arm/mach-orion5x/Kconfig"
-
source "arch/arm/mach-owl/Kconfig"
source "arch/arm/mach-rmobile/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1f4a1d57883b..680c152cae5e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -72,7 +72,6 @@ machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_NEXELL) += nexell
machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
-machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_OWL) += owl
machine-$(CONFIG_ARCH_RMOBILE) += rmobile
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
deleted file mode 100644
index e677211b2e91..000000000000
--- a/arch/arm/mach-orion5x/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if ARCH_ORION5X
-
-config 88F5182
- bool
-
-config FEROCEON
- bool
-
-config SYS_SOC
- default "orion5x"
-
-
-endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
deleted file mode 100644
index a8b87f6d7103..000000000000
--- a/arch/arm/mach-orion5x/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
-#
-# Based on original Kirkwood support which is
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafu...@marvell.com>
-
-obj-y = cpu.o
-obj-y += dram.o
-obj-y += timer.o
-
-ifndef CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT
-obj-y += lowlevel_init.o
-endif
-
-# some files can only build in ARM or THUMB2, not THUMB1
-
-ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
-ifndef CONFIG_HAS_THUMB2
-
-CFLAGS_cpu.o := -marm
-
-endif
-endif
diff --git a/arch/arm/mach-orion5x/cpu.c b/arch/arm/mach-orion5x/cpu.c
deleted file mode 100644
index ffae9a01e37c..000000000000
--- a/arch/arm/mach-orion5x/cpu.c
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <u-boot/md5.h>
-#include <asm/arch/cpu.h>
-
-#define BUFLEN 16
-
-void reset_cpu(void)
-{
- struct orion5x_cpu_registers *cpureg =
- (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE;
-
- writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
- &cpureg->rstoutn_mask);
- writel(readl(&cpureg->sys_soft_rst) | 1,
- &cpureg->sys_soft_rst);
- while (1)
- ;
-}
-
-/*
- * Compute Window Size field value from size expressed in bytes
- * Used with the Base register to set the address window size and location.
- * Must be programmed from LSB to MSB as sequence of ones followed by
- * sequence of zeros. The number of ones specifies the size of the window in
- * 64 KiB granularity (e.g., a value of 0x00FF specifies 256 = 16 MiB).
- * NOTES:
- * 1) A sizeval equal to 0x0 specifies 4 GiB.
- * 2) A return value of 0x0 specifies 64 KiB.
- */
-unsigned int orion5x_winctrl_calcsize(unsigned int sizeval)
-{
- /*
- * Calculate the number of 64 KiB blocks needed minus one (rounding up).
- * For sizeval > 0 this is equivalent to:
- * sizeval = (u32) ceil((double) sizeval / 65536.0) - 1
- */
- sizeval = (sizeval - 1) >> 16;
-
- /*
- * Propagate 'one' bits to the right by 'oring' them.
- * We need only treat bits 15-0.
- */
- sizeval |= sizeval >> 1; /* 'Or' bit 15 onto bit 14 */
- sizeval |= sizeval >> 2; /* 'Or' bits 15-14 onto bits 13-12 */
- sizeval |= sizeval >> 4; /* 'Or' bits 15-12 onto bits 11-8 */
- sizeval |= sizeval >> 8; /* 'Or' bits 15-8 onto bits 7-0*/
-
- return sizeval;
-}
-
-/*
- * orion5x_config_adr_windows - Configure address Windows
- *
- * There are 8 address windows supported by Orion5x Soc to addess different
- * devices. Each window can be configured for size, BAR and remap addr
- * Below configuration is standard for most of the cases
- *
- * If remap function not used, remap_lo must be set as base
- *
- * NOTES:
- *
- * 1) in order to avoid windows with inconsistent control and base values
- * (which could prevent access to BOOTCS and hence execution from FLASH)
- * always disable window before writing the base value then reenable it
- * by writing the control value.
- *
- * 2) in order to avoid losing access to BOOTCS when disabling window 7,
- * first configure window 6 for BOOTCS, then configure window 7 for BOOTCS,
- * then configure windows 6 for its own target.
- *
- * Reference Documentation:
- * Mbus-L to Mbus Bridge Registers Configuration.
- * (Sec 25.1 and 25.3 of Datasheet)
- */
-int orion5x_config_adr_windows(void)
-{
- struct orion5x_win_registers *winregs =
- (struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE;
-
-/* Disable window 0, configure it for its intended target, enable it. */
- writel(0, &winregs[0].ctrl);
- writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base);
- writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo);
- writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM,
- ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM,
- ORION5X_WIN_ENABLE), &winregs[0].ctrl);
-/* Disable window 1, configure it for its intended target, enable it. */
- writel(0, &winregs[1].ctrl);
- writel(ORION5X_ADR_PCIE_IO, &winregs[1].base);
- writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo);
- writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO,
- ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO,
- ORION5X_WIN_ENABLE), &winregs[1].ctrl);
-/* Disable window 2, configure it for its intended target, enable it. */
- writel(0, &winregs[2].ctrl);
- writel(ORION5X_ADR_PCI_MEM, &winregs[2].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM,
- ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM,
- ORION5X_WIN_ENABLE), &winregs[2].ctrl);
-/* Disable window 3, configure it for its intended target, enable it. */
- writel(0, &winregs[3].ctrl);
- writel(ORION5X_ADR_PCI_IO, &winregs[3].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO,
- ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO,
- ORION5X_WIN_ENABLE), &winregs[3].ctrl);
-/* Disable window 4, configure it for its intended target, enable it. */
- writel(0, &winregs[4].ctrl);
- writel(ORION5X_ADR_DEV_CS0, &winregs[4].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0,
- ORION5X_WIN_ENABLE), &winregs[4].ctrl);
-/* Disable window 5, configure it for its intended target, enable it. */
- writel(0, &winregs[5].ctrl);
- writel(ORION5X_ADR_DEV_CS1, &winregs[5].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1,
- ORION5X_WIN_ENABLE), &winregs[5].ctrl);
-/* Disable window 6, configure it for FLASH, enable it. */
- writel(0, &winregs[6].ctrl);
- writel(ORION5X_ADR_BOOTROM, &winregs[6].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
- ORION5X_WIN_ENABLE), &winregs[6].ctrl);
-/* Disable window 7, configure it for FLASH, enable it. */
- writel(0, &winregs[7].ctrl);
- writel(ORION5X_ADR_BOOTROM, &winregs[7].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
- ORION5X_WIN_ENABLE), &winregs[7].ctrl);
-/* Disable window 6, configure it for its intended target, enable it. */
- writel(0, &winregs[6].ctrl);
- writel(ORION5X_ADR_DEV_CS2, &winregs[6].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2,
- ORION5X_WIN_ENABLE), &winregs[6].ctrl);
-
- return 0;
-}
-
-/*
- * Orion5x identification is done through PCIE space.
- */
-
-u32 orion5x_device_id(void)
-{
- return readl(PCIE_DEV_ID_OFF) >> 16;
-}
-
-u32 orion5x_device_rev(void)
-{
- return readl(PCIE_DEV_REV_OFF) & 0xff;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-
-/* Display device and revision IDs.
- * This function must cover all known device/revision
- * combinations, not only the one for which u-boot is
- * compiled; this way, one can identify actual HW in
- * case of a mismatch.
- */
-int print_cpuinfo(void)
-{
- char dev_str[7]; /* room enough for 0x0000 plus null byte */
- char rev_str[5]; /* room enough for 0x00 plus null byte */
- char *dev_name = NULL;
- char *rev_name = NULL;
-
- u32 dev = orion5x_device_id();
- u32 rev = orion5x_device_rev();
-
- if (dev == MV88F5181_DEV_ID) {
- dev_name = "MV88F5181";
- if (rev == MV88F5181_REV_B1)
- rev_name = "B1";
- else if (rev == MV88F5181L_REV_A1) {
- dev_name = "MV88F5181L";
- rev_name = "A1";
- } else if (rev == MV88F5181L_REV_A0) {
- dev_name = "MV88F5181L";
- rev_name = "A0";
- }
- } else if (dev == MV88F5182_DEV_ID) {
- dev_name = "MV88F5182";
- if (rev == MV88F5182_REV_A2)
- rev_name = "A2";
- } else if (dev == MV88F5281_DEV_ID) {
- dev_name = "MV88F5281";
- if (rev == MV88F5281_REV_D2)
- rev_name = "D2";
- else if (rev == MV88F5281_REV_D1)
- rev_name = "D1";
- else if (rev == MV88F5281_REV_D0)
- rev_name = "D0";
- } else if (dev == MV88F6183_DEV_ID) {
- dev_name = "MV88F6183";
- if (rev == MV88F6183_REV_B0)
- rev_name = "B0";
- }
- if (dev_name == NULL) {
- sprintf(dev_str, "0x%04x", dev);
- dev_name = dev_str;
- }
- if (rev_name == NULL) {
- sprintf(rev_str, "0x%02x", rev);
- rev_name = rev_str;
- }
-
- printf("SoC: Orion5x %s-%s\n", dev_name, rev_name);
-
- return 0;
-}
-#endif /* CONFIG_DISPLAY_CPUINFO */
-
-#ifdef CONFIG_ARCH_CPU_INIT
-int arch_cpu_init(void)
-{
- /* Enable and invalidate L2 cache in write through mode */
- invalidate_l2_cache();
-
-#ifdef CONFIG_SPL_BUILD
- orion5x_config_adr_windows();
-#endif
-
- return 0;
-}
-#endif /* CONFIG_ARCH_CPU_INIT */
-
-/*
- * SOC specific misc init
- */
-#if defined(CONFIG_ARCH_MISC_INIT)
-int arch_misc_init(void)
-{
- u32 temp;
-
- /*CPU streaming & write allocate */
- temp = readfr_extra_feature_reg();
- temp &= ~(1 << 28); /* disable wr alloc */
- writefr_extra_feature_reg(temp);
-
- temp = readfr_extra_feature_reg();
- temp &= ~(1 << 29); /* streaming disabled */
- writefr_extra_feature_reg(temp);
-
- /* L2Cache settings */
- temp = readfr_extra_feature_reg();
- /* Disable L2C pre fetch - Set bit 24 */
- temp |= (1 << 24);
- /* enable L2C - Set bit 22 */
- temp |= (1 << 22);
- writefr_extra_feature_reg(temp);
-
- icache_enable();
- /* Change reset vector to address 0x0 */
- temp = get_cr();
- set_cr(temp & ~CR_V);
-
- /* Set CPIOs and MPPs - values provided by board
- include file */
- writel(ORION5X_MPP0_7, ORION5X_MPP_BASE+0x00);
- writel(ORION5X_MPP8_15, ORION5X_MPP_BASE+0x04);
- writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50);
- writel(ORION5X_GPIO_OUT_VALUE, ORION5X_GPIO_BASE+0x00);
- writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04);
- writel(ORION5X_GPIO_IN_POLARITY, ORION5X_GPIO_BASE+0x0c);
-
- /* initialize timer */
- timer_init_r();
- return 0;
-}
-#endif /* CONFIG_ARCH_MISC_INIT */
-
-#ifdef CONFIG_MVGBE
-int cpu_eth_init(struct bd_info *bis)
-{
- mvgbe_initialize(bis);
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-orion5x/dram.c b/arch/arm/mach-orion5x/dram.c
deleted file mode 100644
index c9a3750e48de..000000000000
--- a/arch/arm/mach-orion5x/dram.c
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- */
-
-#include <common.h>
-#include <config.h>
-#include <init.h>
-#include <asm/arch/cpu.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * orion5x_sdram_bar - reads SDRAM Base Address Register
- */
-u32 orion5x_sdram_bar(enum memory_bank bank)
-{
- struct orion5x_ddr_addr_decode_registers *winregs =
- (struct orion5x_ddr_addr_decode_registers *)
- ORION5X_DRAM_BASE;
-
- u32 result = 0;
- u32 enable = 0x01 & winregs[bank].size;
-
- if ((!enable) || (bank > BANK3))
- return 0;
-
- result = winregs[bank].base;
- return result;
-}
-int dram_init (void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size(
- (long *) orion5x_sdram_bar(0),
- CONFIG_MAX_RAM_BANK_SIZE);
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
- gd->bd->bi_dram[i].size = get_ram_size(
- (long *) (gd->bd->bi_dram[i].start),
- CONFIG_MAX_RAM_BANK_SIZE);
- }
-
- return 0;
-}
diff --git a/arch/arm/mach-orion5x/include/mach/cpu.h
b/arch/arm/mach-orion5x/include/mach/cpu.h
deleted file mode 100644
index c3ff89669e45..000000000000
--- a/arch/arm/mach-orion5x/include/mach/cpu.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * Based on original Kirorion5x_ood support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- */
-
-#ifndef _ORION5X_CPU_H
-#define _ORION5X_CPU_H
-
-#include <asm/system.h>
-
-#ifndef __ASSEMBLY__
-
-#define ORION5X_CPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \
- | (attr << 8) | (orion5x_winctrl_calcsize(size) << 16))
-
-#define ORION5XGBE_PORT_SERIAL_CONTROL1_REG(_x) \
- ((_x ? ORION5X_EGIGA0_BASE : ORION5X_EGIGA1_BASE) + 0x44c)
-
-enum memory_bank {
- BANK0,
- BANK1,
- BANK2,
- BANK3
-};
-
-enum orion5x_cpu_winen {
- ORION5X_WIN_DISABLE,
- ORION5X_WIN_ENABLE
-};
-
-enum orion5x_cpu_target {
- ORION5X_TARGET_DRAM = 0,
- ORION5X_TARGET_DEVICE = 1,
- ORION5X_TARGET_PCI = 3,
- ORION5X_TARGET_PCIE = 4,
- ORION5X_TARGET_SASRAM = 9
-};
-
-enum orion5x_cpu_attrib {
- ORION5X_ATTR_DRAM_CS0 = 0x0e,
- ORION5X_ATTR_DRAM_CS1 = 0x0d,
- ORION5X_ATTR_DRAM_CS2 = 0x0b,
- ORION5X_ATTR_DRAM_CS3 = 0x07,
- ORION5X_ATTR_PCI_MEM = 0x59,
- ORION5X_ATTR_PCI_IO = 0x51,
- ORION5X_ATTR_PCIE_MEM = 0x59,
- ORION5X_ATTR_PCIE_IO = 0x51,
- ORION5X_ATTR_SASRAM = 0x00,
- ORION5X_ATTR_DEV_CS0 = 0x1e,
- ORION5X_ATTR_DEV_CS1 = 0x1d,
- ORION5X_ATTR_DEV_CS2 = 0x1b,
- ORION5X_ATTR_BOOTROM = 0x0f
-};
-
-/*
- * Device Address MAP BAR values
- *
- * All addresses and sizes not defined by board code
- * will be given default values here.
- */
-
-#if !defined (ORION5X_ADR_PCIE_MEM)
-#define ORION5X_ADR_PCIE_MEM 0x90000000
-#endif
-
-#if !defined (ORION5X_ADR_PCIE_MEM_REMAP_LO)
-#define ORION5X_ADR_PCIE_MEM_REMAP_LO 0x90000000
-#endif
-
-#if !defined (ORION5X_ADR_PCIE_MEM_REMAP_HI)
-#define ORION5X_ADR_PCIE_MEM_REMAP_HI 0
-#endif
-
-#if !defined (ORION5X_SZ_PCIE_MEM)
-#define ORION5X_SZ_PCIE_MEM (128*1024*1024)
-#endif
-
-#if !defined (ORION5X_ADR_PCIE_IO)
-#define ORION5X_ADR_PCIE_IO 0xf0000000
-#endif
-
-#if !defined (ORION5X_ADR_PCIE_IO_REMAP_LO)
-#define ORION5X_ADR_PCIE_IO_REMAP_LO 0xf0000000
-#endif
-
-#if !defined (ORION5X_ADR_PCIE_IO_REMAP_HI)
-#define ORION5X_ADR_PCIE_IO_REMAP_HI 0
-#endif
-
-#if !defined (ORION5X_SZ_PCIE_IO)
-#define ORION5X_SZ_PCIE_IO (64*1024)
-#endif
-
-#if !defined (ORION5X_ADR_PCI_MEM)
-#define ORION5X_ADR_PCI_MEM 0x98000000
-#endif
-
-#if !defined (ORION5X_SZ_PCI_MEM)
-#define ORION5X_SZ_PCI_MEM (128*1024*1024)
-#endif
-
-#if !defined (ORION5X_ADR_PCI_IO)
-#define ORION5X_ADR_PCI_IO 0xf0100000
-#endif
-
-#if !defined (ORION5X_SZ_PCI_IO)
-#define ORION5X_SZ_PCI_IO (64*1024)
-#endif
-
-#if !defined (ORION5X_ADR_DEV_CS0)
-#define ORION5X_ADR_DEV_CS0 0xfa000000
-#endif
-
-#if !defined (ORION5X_SZ_DEV_CS0)
-#define ORION5X_SZ_DEV_CS0 (2*1024*1024)
-#endif
-
-#if !defined (ORION5X_ADR_DEV_CS1)
-#define ORION5X_ADR_DEV_CS1 0xf8000000
-#endif
-
-#if !defined (ORION5X_SZ_DEV_CS1)
-#define ORION5X_SZ_DEV_CS1 (32*1024*1024)
-#endif
-
-#if !defined (ORION5X_ADR_DEV_CS2)
-#define ORION5X_ADR_DEV_CS2 0xfa800000
-#endif
-
-#if !defined (ORION5X_SZ_DEV_CS2)
-#define ORION5X_SZ_DEV_CS2 (1*1024*1024)
-#endif
-
-#if !defined (ORION5X_ADR_BOOTROM)
-#define ORION5X_ADR_BOOTROM 0xFFF80000
-#endif
-
-#if !defined (ORION5X_SZ_BOOTROM)
-#define ORION5X_SZ_BOOTROM (512*1024)
-#endif
-
-/*
- * PCIE registers are used for SoC device ID and revision
- */
-#define PCIE_DEV_ID_OFF (ORION5X_REG_PCIE_BASE + 0x0000)
-#define PCIE_DEV_REV_OFF (ORION5X_REG_PCIE_BASE + 0x0008)
-
-/*
- * The following definitions are intended for identifying
- * the real device and revision on which u-boot is running
- * even if it was compiled only for a specific one. Thus,
- * these constants must not be considered chip-specific.
- */
-
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID 0x5181
-#define MV88F5181_REV_B1 3
-#define MV88F5181L_REV_A0 8
-#define MV88F5181L_REV_A1 9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID 0x5182
-#define MV88F5182_REV_A2 2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID 0x5281
-#define MV88F5281_REV_D0 4
-#define MV88F5281_REV_D1 5
-#define MV88F5281_REV_D2 6
-/* Orion-1-90 (88F6183) */
-#define MV88F6183_DEV_ID 0x6183
-#define MV88F6183_REV_B0 3
-
-/*
- * read feroceon core extra feature register
- * using co-proc instruction
- */
-static inline unsigned int readfr_extra_feature_reg(void)
-{
- unsigned int val;
- asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr" : "=r"
- (val) : : "cc");
- return val;
-}
-
-/*
- * write feroceon core extra feature register
- * using co-proc instruction
- */
-static inline void writefr_extra_feature_reg(unsigned int val)
-{
- asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr" : : "r"
- (val) : "cc");
- isb();
-}
-
-/*
- * AHB to Mbus Bridge Registers
- * Source: 88F5182 User Manual, Appendix A, section A.4
- * Note: only windows 0 and 1 have remap capability.
- */
-struct orion5x_win_registers {
- u32 ctrl;
- u32 base;
- u32 remap_lo;
- u32 remap_hi;
-};
-
-/*
- * CPU control and status Registers
- * Source: 88F5182 User Manual, Appendix A, section A.4
- */
-struct orion5x_cpu_registers {
- u32 config; /*0x20100 */
- u32 ctrl_stat; /*0x20104 */
- u32 rstoutn_mask; /* 0x20108 */
- u32 sys_soft_rst; /* 0x2010C */
- u32 ahb_mbus_cause_irq; /* 0x20110 */
- u32 ahb_mbus_mask_irq; /* 0x20114 */
-};
-
-/*
- * DDR SDRAM Controller Address Decode Registers
- * Source: 88F5182 User Manual, Appendix A, section A.5.1
- */
-struct orion5x_ddr_addr_decode_registers {
- u32 base;
- u32 size;
-};
-
-/*
- * functions
- */
-u32 orion5x_device_id(void);
-u32 orion5x_device_rev(void);
-unsigned int orion5x_winctrl_calcsize(unsigned int sizeval);
-void timer_init_r(void);
-#endif /* __ASSEMBLY__ */
-#endif /* _ORION5X_CPU_H */
diff --git a/arch/arm/mach-orion5x/include/mach/mv88f5182.h
b/arch/arm/mach-orion5x/include/mach/mv88f5182.h
deleted file mode 100644
index 0e9fe0dc51af..000000000000
--- a/arch/arm/mach-orion5x/include/mach/mv88f5182.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * Based on original Kirkwood 88F6182 support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- *
- * Header file for Feroceon CPU core 88F5182 SOC.
- */
-
-#ifndef _CONFIG_88F5182_H
-#define _CONFIG_88F5182_H
-
-/* SOC specific definitions */
-#define F88F5182_REGS_PHYS_BASE 0xf1000000
-#define ORION5X_REGS_PHY_BASE F88F5182_REGS_PHYS_BASE
-
-/* TCLK Core Clock defination */
-#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
-
-#endif /* _CONFIG_88F5182_H */
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h
b/arch/arm/mach-orion5x/include/mach/orion5x.h
deleted file mode 100644
index 4b1b0b0f3716..000000000000
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- *
- * Header file for Marvell's Orion SoC with Feroceon CPU core.
- */
-
-#ifndef _ASM_ARCH_ORION5X_H
-#define _ASM_ARCH_ORION5X_H
-
-#if defined(CONFIG_FEROCEON)
-
-/* SOC specific definations */
-#define ORION5X_REGISTER(x) (ORION5X_REGS_PHY_BASE + x)
-
-/* Documented registers */
-#define ORION5X_DRAM_BASE (ORION5X_REGISTER(0x01500))
-#define ORION5X_TWSI_BASE (ORION5X_REGISTER(0x11000))
-#define ORION5X_UART0_BASE (ORION5X_REGISTER(0x12000))
-#define ORION5X_UART1_BASE (ORION5X_REGISTER(0x12100))
-#define ORION5X_MPP_BASE (ORION5X_REGISTER(0x10000))
-#define ORION5X_GPIO_BASE (ORION5X_REGISTER(0x10100))
-#define ORION5X_CPU_WIN_BASE (ORION5X_REGISTER(0x20000))
-#define ORION5X_CPU_REG_BASE (ORION5X_REGISTER(0x20100))
-#define ORION5X_TIMER_BASE (ORION5X_REGISTER(0x20300))
-#define ORION5X_REG_PCI_BASE (ORION5X_REGISTER(0x30000))
-#define ORION5X_REG_PCIE_BASE (ORION5X_REGISTER(0x40000))
-#define ORION5X_USB20_PORT0_BASE (ORION5X_REGISTER(0x50000))
-#define ORION5X_USB20_PORT1_BASE (ORION5X_REGISTER(0xA0000))
-#define ORION5X_EGIGA_BASE (ORION5X_REGISTER(0x72000))
-#define ORION5X_SATA_BASE (ORION5X_REGISTER(0x80000))
-#define ORION5X_SATA_PORT0_OFFSET 0x2000
-#define ORION5X_SATA_PORT1_OFFSET 0x4000
-
-/* Orion5x GbE controller has a single port */
-#define MAX_MVGBE_DEVS 1
-#define MVGBE0_BASE ORION5X_EGIGA_BASE
-
-/* Orion5x USB Host controller is port 1 */
-#define MVUSB0_BASE ORION5X_USB20_HOST_PORT_BASE
-#define MVUSB0_CPU_ATTR_DRAM_CS0 ORION5X_ATTR_DRAM_CS0
-#define MVUSB0_CPU_ATTR_DRAM_CS1 ORION5X_ATTR_DRAM_CS1
-#define MVUSB0_CPU_ATTR_DRAM_CS2 ORION5X_ATTR_DRAM_CS2
-#define MVUSB0_CPU_ATTR_DRAM_CS3 ORION5X_ATTR_DRAM_CS3
-
-/* Kirkwood CPU memory windows */
-#define MVCPU_WIN_CTRL_DATA ORION5X_CPU_WIN_CTRL_DATA
-#define MVCPU_WIN_ENABLE ORION5X_WIN_ENABLE
-#define MVCPU_WIN_DISABLE ORION5X_WIN_DISABLE
-
-#define CONFIG_MAX_RAM_BANK_SIZE (64*1024*1024)
-
-/* include here SoC variants. 5181, 5281, 6183 should go here when
- adding support for them, and this comment should then be updated. */
-#if defined(CONFIG_88F5182)
-#include <asm/arch/mv88f5182.h>
-#else
-#error "SOC Name not defined"
-#endif
-#endif /* CONFIG_FEROCEON */
-#endif /* _ASM_ARCH_ORION5X_H */
diff --git a/arch/arm/mach-orion5x/lowlevel_init.S
b/arch/arm/mach-orion5x/lowlevel_init.S
deleted file mode 100644
index aa3fcf7c3010..000000000000
--- a/arch/arm/mach-orion5x/lowlevel_init.S
+++ /dev/null
@@ -1,286 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- */
-
-#include <config.h>
-#include "asm/arch/orion5x.h"
-
-/*
- * Configuration values for SDRAM access setup
- */
-
-#define SDRAM_CONFIG 0x3148400
-#define SDRAM_MODE 0x62
-#define SDRAM_CONTROL 0x4041000
-#define SDRAM_TIME_CTRL_LOW 0x11602220
-#define SDRAM_TIME_CTRL_HI 0x40c
-#define SDRAM_OPEN_PAGE_EN 0x0
-/* DDR 1 2x 32M NANYA NT5DS16M16CS-6K ==> 64MB */
-#define SDRAM_BANK0_SIZE 0x3ff0001
-#define SDRAM_ADDR_CTRL 0x10
-
-#define SDRAM_OP_NOP 0x05
-#define SDRAM_OP_SETMODE 0x03
-
-#define SDRAM_PAD_CTRL_WR_EN 0x80000000
-#define SDRAM_PAD_CTRL_TUNE_EN 0x00010000
-#define SDRAM_PAD_CTRL_DRVN_MASK 0x0000003f
-#define SDRAM_PAD_CTRL_DRVP_MASK 0x00000fc0
-
-/*
- * For Guideline MEM-3 - Drive Strength value
- */
-
-#define DDR1_PAD_STRENGTH_DEFAULT 0x00001000
-#define SDRAM_PAD_CTRL_DRV_STR_MASK 0x00003000
-
-/*
- * For Guideline MEM-4 - DQS Reference Delay Tuning
- */
-
-#define MSAR_ARMDDRCLCK_MASK 0x000000f0
-#define MSAR_ARMDDRCLCK_H_MASK 0x00000100
-
-#define MSAR_ARMDDRCLCK_333_167 0x00000000
-#define MSAR_ARMDDRCLCK_500_167 0x00000030
-#define MSAR_ARMDDRCLCK_667_167 0x00000060
-#define MSAR_ARMDDRCLCK_400_200_1 0x000001E0
-#define MSAR_ARMDDRCLCK_400_200 0x00000010
-#define MSAR_ARMDDRCLCK_600_200 0x00000050
-#define MSAR_ARMDDRCLCK_800_200 0x00000070
-
-#define FTDLL_DDR1_166MHZ 0x0047F001
-
-#define FTDLL_DDR1_200MHZ 0x0044D001
-
-/*
- * Low-level init happens right after start.S has switched to SVC32,
- * flushed and disabled caches and disabled MMU. We're still running
- * from the boot chip select, so the first thing SPL should do is to
- * set up the RAM to copy U-Boot into.
- */
-
-.globl lowlevel_init
-
-lowlevel_init:
-
-#ifdef CONFIG_SPL_BUILD
-
- /* Use 'r2 as the base for internal register accesses */
- ldr r2, =ORION5X_REGS_PHY_BASE
-
- /* move internal registers from the default 0xD0000000
- * to their intended location, defined by SoC */
- ldr r3, =0xD0000000
- add r3, r3, #0x20000
- str r2, [r3, #0x80]
-
- /* Use R3 as the base for DRAM registers */
- add r3, r2, #0x01000
-
- /*DDR SDRAM Initialization Control */
- ldr r0, =0x00000001
- str r0, [r3, #0x480]
-
- /* Use R3 as the base for PCI registers */
- add r3, r2, #0x31000
-
- /* Disable arbiter */
- ldr r0, =0x00000030
- str r0, [r3, #0xd00]
-
- /* Use R3 as the base for DRAM registers */
- add r3, r2, #0x01000
-
- /* set all dram windows to 0 */
- mov r0, #0
- str r0, [r3, #0x504]
- str r0, [r3, #0x50C]
- str r0, [r3, #0x514]
- str r0, [r3, #0x51C]
-
- /* 1) Configure SDRAM */
- ldr r0, =SDRAM_CONFIG
- str r0, [r3, #0x400]
-
- /* 2) Set SDRAM Control reg */
- ldr r0, =SDRAM_CONTROL
- str r0, [r3, #0x404]
-
- /* 3) Write SDRAM address control register */
- ldr r0, =SDRAM_ADDR_CTRL
- str r0, [r3, #0x410]
-
- /* 4) Write SDRAM bank 0 size register */
- ldr r0, =SDRAM_BANK0_SIZE
- str r0, [r3, #0x504]
- /* keep other banks disabled */
-
- /* 5) Write SDRAM open pages control register */
- ldr r0, =SDRAM_OPEN_PAGE_EN
- str r0, [r3, #0x414]
-
- /* 6) Write SDRAM timing Low register */
- ldr r0, =SDRAM_TIME_CTRL_LOW
- str r0, [r3, #0x408]
-
- /* 7) Write SDRAM timing High register */
- ldr r0, =SDRAM_TIME_CTRL_HI
- str r0, [r3, #0x40C]
-
- /* 8) Write SDRAM mode register */
- /* The CPU must not attempt to change the SDRAM Mode register setting */
- /* prior to DRAM controller completion of the DRAM initialization */
- /* sequence. To guarantee this restriction, it is recommended that */
- /* the CPU sets the SDRAM Operation register to NOP command, performs */
- /* read polling until the register is back in Normal operation value, */
- /* and then sets SDRAM Mode register to its new value. */
-
- /* 8.1 write 'nop' to SDRAM operation */
- ldr r0, =SDRAM_OP_NOP
- str r0, [r3, #0x418]
-
- /* 8.2 poll SDRAM operation until back in 'normal' mode. */
-1:
- ldr r0, [r3, #0x418]
- cmp r0, #0
- bne 1b
-
- /* 8.3 Now its safe to write new value to SDRAM Mode register */
- ldr r0, =SDRAM_MODE
- str r0, [r3, #0x41C]
-
- /* 8.4 Set new mode */
- ldr r0, =SDRAM_OP_SETMODE
- str r0, [r3, #0x418]
-
- /* 8.5 poll SDRAM operation until back in 'normal' mode. */
-2:
- ldr r0, [r3, #0x418]
- cmp r0, #0
- bne 2b
-
- /* DDR SDRAM Address/Control Pads Calibration */
- ldr r0, [r3, #0x4C0]
-
- /* Set Bit [31] to make the register writable */
- orr r0, r0, #SDRAM_PAD_CTRL_WR_EN
- str r0, [r3, #0x4C0]
-
- bic r0, r0, #SDRAM_PAD_CTRL_WR_EN
- bic r0, r0, #SDRAM_PAD_CTRL_TUNE_EN
- bic r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK
- bic r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK
-
- /* Get the final N locked value of driving strength [22:17] */
- mov r1, r0
- mov r1, r1, LSL #9
- mov r1, r1, LSR #26 /* r1[5:0]<DrvN> = r3[22:17]<LockN> */
- orr r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN> */
-
- /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
- orr r0, r0, r1
- str r0, [r3, #0x4C0]
-
- /* DDR SDRAM Data Pads Calibration */
- ldr r0, [r3, #0x4C4]
-
- /* Set Bit [31] to make the register writable */
- orr r0, r0, #SDRAM_PAD_CTRL_WR_EN
- str r0, [r3, #0x4C4]
-
- bic r0, r0, #SDRAM_PAD_CTRL_WR_EN
- bic r0, r0, #SDRAM_PAD_CTRL_TUNE_EN
- bic r0, r0, #SDRAM_PAD_CTRL_DRVN_MASK
- bic r0, r0, #SDRAM_PAD_CTRL_DRVP_MASK
-
- /* Get the final N locked value of driving strength [22:17] */
- mov r1, r0
- mov r1, r1, LSL #9
- mov r1, r1, LSR #26
- orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN> */
-
- /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
- orr r0, r0, r1
-
- str r0, [r3, #0x4C4]
-
- /* Implement Guideline (GL# MEM-3) Drive Strength Value */
- /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
-
- ldr r1, =DDR1_PAD_STRENGTH_DEFAULT
-
- /* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */
- ldr r0, [r3, #0x4C0]
- orr r0, r0, #SDRAM_PAD_CTRL_WR_EN
- str r0, [r3, #0x4C0]
-
- /* Correct strength and disable writes again */
- bic r0, r0, #SDRAM_PAD_CTRL_WR_EN
- bic r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK
- orr r0, r0, r1
- str r0, [r3, #0x4C0]
-
- /* Enable writes to DDR SDRAM Data Pads Calibration register */
- ldr r0, [r3, #0x4C4]
- orr r0, r0, #SDRAM_PAD_CTRL_WR_EN
- str r0, [r3, #0x4C4]
-
- /* Correct strength and disable writes again */
- bic r0, r0, #SDRAM_PAD_CTRL_DRV_STR_MASK
- bic r0, r0, #SDRAM_PAD_CTRL_WR_EN
- orr r0, r0, r1
- str r0, [r3, #0x4C4]
-
- /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */
- /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
-
- /* Get the "sample on reset" register for the DDR frequancy */
- ldr r3, =0x10000
- ldr r0, [r3, #0x010]
- ldr r1, =MSAR_ARMDDRCLCK_MASK
- and r1, r0, r1
-
- ldr r0, =FTDLL_DDR1_166MHZ
- cmp r1, #MSAR_ARMDDRCLCK_333_167
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_500_167
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_667_167
- beq 3f
-
- ldr r0, =FTDLL_DDR1_200MHZ
- cmp r1, #MSAR_ARMDDRCLCK_400_200_1
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_400_200
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_600_200
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_800_200
- beq 3f
-
- ldr r0, =0
-
-3:
- /* Use R3 as the base for DRAM registers */
- add r3, r2, #0x01000
-
- ldr r2, [r3, #0x484]
- orr r2, r2, r0
- str r2, [r3, #0x484]
-
- /* enable for 2 GB DDR; detection should find out real amount */
- sub r0, r0, r0
- str r0, [r3, #0x500]
- ldr r0, =0x7fff0001
- str r0, [r3, #0x504]
-
-#endif /* CONFIG_SPL_BUILD */
-
- /* Return to U-Boot via saved link register */
- mov pc, lr
diff --git a/arch/arm/mach-orion5x/timer.c b/arch/arm/mach-orion5x/timer.c
deleted file mode 100644
index d7ea2e3943fc..000000000000
--- a/arch/arm/mach-orion5x/timer.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * Copyright (C) Marvell International Ltd. and its affiliates
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <time.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#define UBOOT_CNTR 0 /* counter to use for uboot timer */
-
-/* Timer reload and current value registers */
-struct orion5x_tmr_val {
- u32 reload; /* Timer reload reg */
- u32 val; /* Timer value reg */
-};
-
-/* Timer registers */
-struct orion5x_tmr_registers {
- u32 ctrl; /* Timer control reg */
- u32 pad[3];
- struct orion5x_tmr_val tmr[2];
- u32 wdt_reload;
- u32 wdt_val;
-};
-
-struct orion5x_tmr_registers *orion5x_tmr_regs =
- (struct orion5x_tmr_registers *)ORION5X_TIMER_BASE;
-
-/*
- * ARM Timers Registers Map
- */
-#define CNTMR_CTRL_REG (&orion5x_tmr_regs->ctrl)
-#define CNTMR_RELOAD_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].reload)
-#define CNTMR_VAL_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].val)
-
-/*
- * ARM Timers Control Register
- * CPU_TIMERS_CTRL_REG (CTCR)
- */
-#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2)
-#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS)
-#define CTCR_ARM_TIMER_EN(cntr) (1 <<
CTCR_ARM_TIMER_EN_OFFS(cntr))
-#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
-
-#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1)
-#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1)
-#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
-#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
-
-/*
- * ARM Timer\Watchdog Reload Register
- * CNTMR_RELOAD_REG (TRR)
- */
-#define TRG_ARM_TIMER_REL_OFFS 0
-#define TRG_ARM_TIMER_REL_MASK 0xffffffff
-
-/*
- * ARM Timer\Watchdog Register
- * CNTMR_VAL_REG (TVRG)
- */
-#define TVR_ARM_TIMER_OFFS 0
-#define TVR_ARM_TIMER_MASK 0xffffffff
-#define TVR_ARM_TIMER_MAX 0xffffffff
-#define TIMER_LOAD_VAL 0xffffffff
-
-static inline ulong read_timer(void)
-{
- return readl(CNTMR_VAL_REG(UBOOT_CNTR))
- / (CONFIG_SYS_TCLK / 1000);
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define timestamp gd->arch.tbl
-#define lastdec gd->arch.lastinc
-
-static ulong get_timer_masked(void)
-{
- ulong now = read_timer();
-
- if (lastdec >= now) {
- /* normal mode */
- timestamp += lastdec - now;
- } else {
- /* we have an overflow ... */
- timestamp += lastdec +
- (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
- }
- lastdec = now;
-
- return timestamp;
-}
-
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-static inline ulong uboot_cntr_val(void)
-{
- return readl(CNTMR_VAL_REG(UBOOT_CNTR));
-}
-
-void __udelay(unsigned long usec)
-{
- uint current;
- ulong delayticks;
-
- current = uboot_cntr_val();
- delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
-
- if (current < delayticks) {
- delayticks -= current;
- while (uboot_cntr_val() < current)
- ;
- while ((TIMER_LOAD_VAL - delayticks) < uboot_cntr_val())
- ;
- } else {
- while (uboot_cntr_val() > (current - delayticks))
- ;
- }
-}
-
-/*
- * init the counter
- */
-int timer_init(void)
-{
- unsigned int cntmrctrl;
-
- /* load value into timer */
- writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
- writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
-
- /* enable timer in auto reload mode */
- cntmrctrl = readl(CNTMR_CTRL_REG);
- cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
- cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
- writel(cntmrctrl, CNTMR_CTRL_REG);
- return 0;
-}
-
-void timer_init_r(void)
-{
- /* init the timestamp and lastdec value */
- lastdec = read_timer();
- timestamp = 0;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return (ulong)CONFIG_SYS_HZ;
-}
diff --git a/arch/arm/mach-orion5x/u-boot-spl.lds
b/arch/arm/mach-orion5x/u-boot-spl.lds
deleted file mode 100644
index 154bb1206035..000000000000
--- a/arch/arm/mach-orion5x/u-boot-spl.lds
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2014 Albert ARIBAUD <albert.u.b...@aribaud.net>
- *
- * Based on:
- *
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangli...@allwinnertech.com>
- *
- * Based on omap-common/u-boot-spl.lds:
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <ga...@denx.de>
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- * Aneesh V <ane...@ti.com>
- */
-MEMORY { .nor : ORIGIN = IMAGE_TEXT_BASE,\
- LENGTH = IMAGE_MAX_SIZE }
-MEMORY { .bss : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
- LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- __start = .;
- *(.vectors)
- CPUDIR/start.o (.text)
- *(.text*)
- } > .nor
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.nor
-
- . = ALIGN(4);
- .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.nor
-
- . = ALIGN(4);
- __u_boot_list : {
- KEEP(*(SORT(__u_boot_list*)));
- } > .nor
-
- . = ALIGN(4);
- __image_copy_end = .;
- _end = .;
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.bss*)
- . = ALIGN(4);
- __bss_end = .;
- } > .bss
-}
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index f48a4f25aae6..b722089c3d58 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -30,9 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
*/
#if !CONFIG_IS_ENABLED(DM_I2C)
-#if defined(CONFIG_ARCH_ORION5X)
-#include <asm/arch/orion5x.h>
-#elif (defined(CONFIG_ARCH_KIRKWOOD) || defined(CONFIG_ARCH_MVEBU))
+#if (defined(CONFIG_ARCH_KIRKWOOD) || defined(CONFIG_ARCH_MVEBU))
#include <asm/arch/soc.h>
#elif defined(CONFIG_ARCH_SUNXI)
#include <asm/arch/i2c.h>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6bbbadc5eef3..89fd2d1db737 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -440,7 +440,7 @@ config KSZ9477
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
- depends on ARCH_KIRKWOOD || ARCH_ORION5X
+ depends on ARCH_KIRKWOOD
select PHYLIB
help
This driver supports the network interface units in the
diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
index a77c05743262..c96732786d6c 100644
--- a/drivers/net/mvgbe.c
+++ b/drivers/net/mvgbe.c
@@ -29,8 +29,6 @@
#if defined(CONFIG_ARCH_KIRKWOOD)
#include <asm/arch/soc.h>
-#elif defined(CONFIG_ARCH_ORION5X)
-#include <asm/arch/orion5x.h>
#endif
#include "mvgbe.h"
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a0f48f09a7f3..3a7cfd8043c8 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -175,7 +175,7 @@ config USB_EHCI_EXYNOS
config USB_EHCI_MARVELL
bool "Support for Marvell on-chip EHCI USB controller"
- depends on ARCH_MVEBU || ARCH_KIRKWOOD || ARCH_ORION5X
+ depends on ARCH_MVEBU || ARCH_KIRKWOOD
default y
select USB_EHCI_IS_TDI if !ARM64
---help---
diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
index b7e60c690a4f..e7cb2ee92a01 100644
--- a/drivers/usb/host/ehci-marvell.c
+++ b/drivers/usb/host/ehci-marvell.c
@@ -18,8 +18,6 @@
#if defined(CONFIG_ARCH_KIRKWOOD)
#include <asm/arch/soc.h>
-#elif defined(CONFIG_ARCH_ORION5X)
-#include <asm/arch/orion5x.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 384a8f7d1dd8..0d39add6b602 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -10,7 +10,6 @@
* This file should be included in board config header file.
*
* It supports common definations for Kirkwood platform
- * TBD: support for Orion5X platforms
*/
#ifndef _MV_COMMON_H
--
2.37.3
