Hi, On 9/8/22 12:59, Alain Volmat wrote:
Comment within stm32_i2c_message_start is misleading, indicating that AUTOEND bit is setted while it is actually cleared. Moreover, the bit is actually never setted so there is no need to clear it hence get rid of this bit clear and the bit macro as well.Signed-off-by: Alain Volmat <alain.vol...@foss.st.com> --- drivers/i2c/stm32f7_i2c.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c index bf2a6c9b4b..78d7156492 100644 --- a/drivers/i2c/stm32f7_i2c.c +++ b/drivers/i2c/stm32f7_i2c.c @@ -57,7 +57,6 @@ struct stm32_i2c_regs { #define STM32_I2C_CR1_PE BIT(0)/* STM32 I2C control 2 */-#define STM32_I2C_CR2_AUTOEND BIT(25) #define STM32_I2C_CR2_RELOAD BIT(24) #define STM32_I2C_CR2_NBYTES_MASK GENMASK(23, 16) #define STM32_I2C_CR2_NBYTES(n) ((n & 0xff) << 16) @@ -304,9 +303,8 @@ static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv, cr2 |= STM32_I2C_CR2_SADD7(msg->addr); }- /* Set nb bytes to transfer and reload or autoend bits */- cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD | - STM32_I2C_CR2_AUTOEND); + /* Set nb bytes to transfer and reload (if needed) */ + cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD); if (msg->len > STM32_I2C_MAX_LEN) { cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN); cr2 |= STM32_I2C_CR2_RELOAD;
Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com> Thanks Patrick
