Re: [PATCH v2 2/3] i2c: stm32: remove unused stop parameter in start & reload handling

[Patrick DELAUNAY]

Hi,

On 9/8/22 12:59, Alain Volmat wrote:

Functions stm32_i2c_message_start and stm32_i2c_handle_reload
both get a stop boolean indicating if the transfer should end with
a STOP or not.  However no specific handling is needed in those
functions hence remove the parameter.

Signed-off-by: Alain Volmat <alain.vol...@foss.st.com>
---
  drivers/i2c/stm32f7_i2c.c | 8 ++++----
  1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
index 78d7156492..0ec67b5c12 100644
--- a/drivers/i2c/stm32f7_i2c.c
+++ b/drivers/i2c/stm32f7_i2c.c
@@ -282,7 +282,7 @@ static int stm32_i2c_check_device_busy(struct 
stm32_i2c_priv *i2c_priv)
  }

static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv,

-                                   struct i2c_msg *msg, bool stop)
+                                   struct i2c_msg *msg)
  {
        struct stm32_i2c_regs *regs = i2c_priv->regs;
        u32 cr2 = readl(&regs->cr2);
@@ -325,7 +325,7 @@ static void stm32_i2c_message_start(struct stm32_i2c_priv 
*i2c_priv,
   */

static void stm32_i2c_handle_reload(struct stm32_i2c_priv *i2c_priv,

-                                   struct i2c_msg *msg, bool stop)
+                                   struct i2c_msg *msg)
  {
        struct stm32_i2c_regs *regs = i2c_priv->regs;
        u32 cr2 = readl(&regs->cr2);
@@ -431,7 +431,7 @@ static int stm32_i2c_message_xfer(struct stm32_i2c_priv 
*i2c_priv,
        /* Add errors */
        mask |= STM32_I2C_ISR_ERRORS;

- stm32_i2c_message_start(i2c_priv, msg, stop);

+       stm32_i2c_message_start(i2c_priv, msg);

while (msg->len) {

                /*
@@ -469,7 +469,7 @@ static int stm32_i2c_message_xfer(struct stm32_i2c_priv 
*i2c_priv,
                        mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE :
                               STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF;

- stm32_i2c_handle_reload(i2c_priv, msg, stop);

+                       stm32_i2c_handle_reload(i2c_priv, msg);
                } else if (!bytes_to_rw) {
                        /* Wait until TC flag is set */
                        mask = STM32_I2C_ISR_TC;

Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com>

Thanks
Patrick