The support added later in this series tweaks the PMIC voltages in the
SPL. Enable support for the rn5t567 in SPL builds to allow this to be done
cleanly.
Signed-off-by: Martyn Welch <martyn.we...@collabora.co.uk>
---
Changes in v3:
- New patch (replaces addition of legacy support for rn5t567)
drivers/power/pmic/Kconfig | 8 ++++++++
drivers/power/pmic/Makefile | 2 +-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 66b16b06e0..8e10ecae2e 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -300,6 +300,14 @@ config PMIC_RN5T567
regulators Real-Time Clock and 4 GPIOs. This driver provides
register access only.
+config SPL_PMIC_RN5T567
+ bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
+ depends on SPL_DM_PMIC
+ ---help---
+ The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
+ regulators Real-Time Clock and 4 GPIOs. This driver provides
+ register access only.
+
config PMIC_TPS65090
bool "Enable driver for Texas Instruments TPS65090 PMIC"
---help---
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index f73b326255..ae34e6b33e 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
obj-$(CONFIG_PMIC_MAX8997) += max8997.o
obj-$(CONFIG_PMIC_PM8916) += pm8916.o
obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
-obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
+obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
--
2.35.1
