On 9/16/22 19:24, Martyn Welch wrote:
> The support added later in this series tweaks the PMIC voltages in the
> SPL. Enable support for the rn5t567 in SPL builds to allow this to be done
> cleanly.
>
> Signed-off-by: Martyn Welch <martyn.we...@collabora.co.uk>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
Best Regards,
Jaehoon Chung
> ---
>
> Changes in v3:
> - New patch (replaces addition of legacy support for rn5t567)
>
> drivers/power/pmic/Kconfig | 8 ++++++++
> drivers/power/pmic/Makefile | 2 +-
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> index 66b16b06e0..8e10ecae2e 100644
> --- a/drivers/power/pmic/Kconfig
> +++ b/drivers/power/pmic/Kconfig
> @@ -300,6 +300,14 @@ config PMIC_RN5T567
> regulators Real-Time Clock and 4 GPIOs. This driver provides
> register access only.
>
> +config SPL_PMIC_RN5T567
> + bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
> + depends on SPL_DM_PMIC
> + ---help---
> + The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
> + regulators Real-Time Clock and 4 GPIOs. This driver provides
> + register access only.
> +
> config PMIC_TPS65090
> bool "Enable driver for Texas Instruments TPS65090 PMIC"
> ---help---
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index f73b326255..ae34e6b33e 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
> obj-$(CONFIG_PMIC_MAX8997) += max8997.o
> obj-$(CONFIG_PMIC_PM8916) += pm8916.o
> obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
> -obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
> +obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
> obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
> obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
> obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
