On Mon, Sep 19, 2022 at 5:02 PM Fabio Estevam <feste...@denx.de> wrote: > > Hi Marek, > > On 19/09/2022 16:41, Marek Vasut wrote: > > Enable DM USB, DM PHY and USB gadget support in imx8mm-mx8menlo SPL > > to let the board continue SDP loading of second stage after the first > > stage was loaded by BootROM SDP implementation. It is not possible to > > jump back into BootROM v1 and let the BootROM implementation continue > > the SDP loading, all this has to be performed by the U-Boot CI HDRC > > controller driver and SDP protocol implementation, both of which fit > > into the SPL just barely. > > > > With this patch, it is possible to start both U-Boot SPL and U-Boot > > using e.g. uuu on this board as follows: > > > > $ uuu -brun spl flash.bin > > > > Signed-off-by: Marek Vasut <ma...@denx.de> > > This is great, I was able to test SPL SDP on an imx8mm-evk after > applying these > same changes to imx8mm-evk and reducing the SPL size.
Fabio, Can you tell me what you did to reduce the SPL size? adam > > For the series: > > Reviewed-by: Fabio Estevam <feste...@denx.de>