On Sat, Sep 24, 2022 at 1:52 PM Michael Nazzareno Trimarchi <mich...@amarulasolutions.com> wrote: > > On Sat, Sep 24, 2022 at 8:38 PM Adam Ford <aford...@gmail.com> wrote: > > > > On Mon, Sep 19, 2022 at 5:02 PM Fabio Estevam <feste...@denx.de> wrote: > > > > > > Hi Marek, > > > > > > On 19/09/2022 16:41, Marek Vasut wrote: > > > > Enable DM USB, DM PHY and USB gadget support in imx8mm-mx8menlo SPL > > > > to let the board continue SDP loading of second stage after the first > > > > stage was loaded by BootROM SDP implementation. It is not possible to > > > > jump back into BootROM v1 and let the BootROM implementation continue > > > > the SDP loading, all this has to be performed by the U-Boot CI HDRC > > > > controller driver and SDP protocol implementation, both of which fit > > > > into the SPL just barely. > > > > > > > > With this patch, it is possible to start both U-Boot SPL and U-Boot > > > > using e.g. uuu on this board as follows: > > > > > > > > $ uuu -brun spl flash.bin > > > > > > > > Signed-off-by: Marek Vasut <ma...@denx.de> > > > > > > This is great, I was able to test SPL SDP on an imx8mm-evk after > > > applying these > > > same changes to imx8mm-evk and reducing the SPL size. > > > > Fabio, > > > > Can you tell me what you did to reduce the SPL size? > > > > CONFIG_LTO from the other patch
Bummer. I was hoping there was more. I already have LTO enabled. I was hoping there was more to it. adam > > Michael > > > adam > > > > > > For the series: > > > > > > Reviewed-by: Fabio Estevam <feste...@denx.de> > > > > -- > Michael Nazzareno Trimarchi > Co-Founder & Chief Executive Officer > M. +39 347 913 2170 > mich...@amarulasolutions.com > __________________________________ > > Amarula Solutions BV > Joop Geesinkweg 125, 1114 AB, Amsterdam, NL > T. +31 (0)85 111 9172 > i...@amarulasolutions.com > www.amarulasolutions.com