Add the pinctrl subnodes required by the USB related DT nodes. Signed-off-by: Sergiu Moga <sergiu.m...@microchip.com> ---
v1 -> v2: - No change arch/arm/dts/at91-sama5d2_icp.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/dts/at91-sama5d2_icp.dts b/arch/arm/dts/at91-sama5d2_icp.dts index 2dffae9c5c..4f796c6c94 100644 --- a/arch/arm/dts/at91-sama5d2_icp.dts +++ b/arch/arm/dts/at91-sama5d2_icp.dts @@ -154,7 +154,29 @@ <PIN_PA13__SDMMC0_CD>; bias-disable; }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PC17__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; }; }; }; }; + +&usb1 { + num-ports = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + phy_type = "hsic"; + status = "okay"; +}; -- 2.34.1