Add the pinctrl nodes required by the USB related DT nodes.
Signed-off-by: Sergiu Moga <sergiu.m...@microchip.com>
---
v1 -> v2:
- No change
arch/arm/dts/at91-sama5d27_wlsom1_ek.dts | 25 ++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
b/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
index eec183d5de..6d4b35ea96 100644
--- a/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts
@@ -143,7 +143,32 @@
pinmux = <PIN_PC9__GPIO>;
bias-pull-up;
};
+
+ pinctrl_usb_default: usb_default {
+ pinmux = <PIN_PA10__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ pinmux = <PIN_PA16__GPIO>;
+ bias-disable;
+ };
};
};
};
};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+ 0
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
--
2.34.1
