On 03.02.23 19:52, Tom Rini wrote: > On Fri, Feb 03, 2023 at 01:26:34PM +0100, Jan Kiszka wrote: >> From: Jan Kiszka <jan.kis...@siemens.com> >> >> Will be needed when CONFIG_ENV_WRITEABLE_LIST is enabled. The listed >> variables shall remain writable, for informational purposes - they have >> to be considered untrusted because the persistent U-Boot env is not >> protected. >> >> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com> >> --- >> include/configs/iot2050.h | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h >> index 5186dfd8ff8..52094e18ea8 100644 >> --- a/include/configs/iot2050.h >> +++ b/include/configs/iot2050.h >> @@ -56,4 +56,12 @@ >> >> #include <configs/ti_armv7_common.h> >> >> +#ifdef CONFIG_ENV_WRITEABLE_LIST >> +/* relevant for secure boot with CONFIG_ENV_WRITEABLE_LIST=y */ >> +#define CONFIG_ENV_FLAGS_LIST_STATIC >> \ >> + "board_uuid:sw,board_name:sw,board_serial:sw,board_a5e:sw," \ >> + "mlfb:sw,fw_version:sw,seboot_version:sw," \ >> + "eth1addr:mw,eth2addr:mw,watchdog_timeout_ms:dw,boot_targets:sw" >> +#endif >> + >> #endif /* __CONFIG_IOT2050_H */ > > I don't think you've tested the whole series on top of current master, > this needs to be CFG_ENV_FLAGS_LIST_STATIC. If this is the only thing > that needs changing, I can just correct this while applying, otherwise a > v6, and I'll try my best to not forget to grab this before -rc2, I know > this whole series has been waiting a while so I thank you for your > patience and persistence here. >
Oh, thanks for pointing that I indeed forgot to test the secure boot case again this time. I'll fix up and do v6 ASAP. Jan -- Siemens AG, Technology Competence Center Embedded Linux