From: Mason Huo <mason....@starfivetech.com>
Enable and add pinctrl configuration for PCIe host controller.
Also add JH7110 stg syscon configuration.
Signed-off-by: Mason Huo <mason....@starfivetech.com>
Signed-off-by: Minda Chen <minda.c...@starfivetech.com>
---
.../dts/jh7110-starfive-visionfive-2.dtsi | 99 +++++++++++++++++++
arch/riscv/dts/jh7110.dtsi | 75 ++++++++++++++
2 files changed, 174 insertions(+)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
index e669c2a26a..995f842a6b 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
@@ -178,6 +178,87 @@
slew-rate = <0>;
};
};
+
+ pcie0_perst_default: pcie0_perst_default {
+ perst-pins {
+ pinmux = <GPIOMUX(26, GPOUT_HIGH, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie0_perst_active: pcie0_perst_active {
+ perst-pins {
+ pinmux = <GPIOMUX(26, GPOUT_LOW, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie0_wake_default: pcie0_wake_default {
+ wake-pins {
+ pinmux = <GPIOMUX(32, GPOUT_HIGH, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie0_clkreq_default: pcie0_clkreq_default {
+ clkreq-pins {
+ pinmux = <GPIOMUX(27, GPOUT_HIGH, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_perst_default: pcie1_perst_default {
+ perst-pins {
+ pinmux = <GPIOMUX(28, GPOUT_HIGH, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_perst_active: pcie1_perst_active {
+ perst-pins {
+ pinmux = <GPIOMUX(28, GPOUT_LOW, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_wake_default: pcie1_wake_default {
+ wake-pins {
+ pinmux = <GPIOMUX(21, GPOUT_HIGH, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_clkreq_default: pcie1_clkreq_default {
+ clkreq-pins {
+ pinmux = <GPIOMUX(29, GPOUT_HIGH, GPOEN_ENABLE,
GPI_NONE)>;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
};
&mmc0 {
@@ -234,6 +315,24 @@
};
};
+&pcie0 {
+ pinctrl-names = "perst-default", "perst-active", "wake-default",
"clkreq-default";
+ pinctrl-0 = <&pcie0_perst_default>;
+ pinctrl-1 = <&pcie0_perst_active>;
+ pinctrl-2 = <&pcie0_wake_default>;
+ pinctrl-3 = <&pcie0_clkreq_default>;
+ status = "disabled";
+};
+
+&pcie1 {
+ pinctrl-names = "perst-default", "perst-active", "wake-default",
"clkreq-default";
+ pinctrl-0 = <&pcie1_perst_default>;
+ pinctrl-1 = <&pcie1_perst_active>;
+ pinctrl-2 = <&pcie1_wake_default>;
+ pinctrl-3 = <&pcie1_clkreq_default>;
+ status = "okay";
+};
+
&syscrg {
assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
<&syscrg JH7110_SYSCLK_BUS_ROOT>,
diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
index d3e9f92987..e43296c9d5 100644
--- a/arch/riscv/dts/jh7110.dtsi
+++ b/arch/riscv/dts/jh7110.dtsi
@@ -578,5 +578,80 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ pcie0: pcie@2B000000 {
+ compatible = "starfive,jh7110-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ reg = <0x0 0x2B000000 0x0 0x1000000>,
+ <0x9 0x40000000 0x0 0x10000000>;
+ reg-names = "reg", "config";
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000
0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0
0x40000000>;
+ msi-parent = <&plic>;
+ interrupts = <56>;
+ interrupt-controller;
+ interrupt-names = "msi";
+ interrupt-parent = <&plic>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>,
+ <0x0 0x0 0x0 0x2 &plic 0x2>,
+ <0x0 0x0 0x0 0x3 &plic 0x3>,
+ <0x0 0x0 0x0 0x4 &plic 0x4>;
+ resets = <&stgcrg JH7110_STGRST_PCIE0_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE0_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE0_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE0_APB>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE0_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+ clock-names = "noc_bus_stg_axi", "pcie0_tl",
"pcie0_axi", "pcie0_apb";
+ status = "disabled";
+ };
+
+ pcie1: pcie@2C000000 {
+ compatible = "starfive,jh7110-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ reg = <0x0 0x2C000000 0x0 0x1000000>,
+ <0x9 0xc0000000 0x0 0x10000000>;
+ reg-names = "reg", "config";
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon 0x270 0x274 0x2e0>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000
0x0 0x08000000>,
+ <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0
0x40000000>;
+ msi-parent = <&plic>;
+ interrupts = <57>;
+ interrupt-controller;
+ interrupt-names = "msi";
+ interrupt-parent = <&plic>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>,
+ <0x0 0x0 0x0 0x2 &plic 0x2>,
+ <0x0 0x0 0x0 0x3 &plic 0x3>,
+ <0x0 0x0 0x0 0x4 &plic 0x4>;
+ resets = <&stgcrg JH7110_STGRST_PCIE1_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE1_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE1_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE1_APB>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE1_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+ clock-names = "noc_bus_stg_axi", "pcie1_tl",
"pcie1_axi", "pcie1_apb";
+ status = "disabled";
+ };
+
};
};
--
2.17.1
