Move clock dump function in preparation for switching to dump function
in clk_ops.
Signed-off-by: Igor Prusov <ivpru...@sberdevices.ru>
---
arch/arm/mach-zynq/clk.c | 57 ---------------------------------------
drivers/clk/clk_zynq.c | 58 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 58 insertions(+), 57 deletions(-)
diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c
index 1945f60e08..e6a67326dd 100644
--- a/arch/arm/mach-zynq/clk.c
+++ b/arch/arm/mach-zynq/clk.c
@@ -13,20 +13,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static const char * const clk_names[clk_max] = {
- "armpll", "ddrpll", "iopll",
- "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
- "ddr2x", "ddr3x", "dci",
- "lqspi", "smc", "pcap", "gem0", "gem1",
- "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
- "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma",
- "usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper",
- "sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper",
- "can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper",
- "uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper",
- "smc_aper", "swdt", "dbg_trc", "dbg_apb"
-};
-
/**
* set_cpu_clk_info() - Setup clock information
*
@@ -65,46 +51,3 @@ int set_cpu_clk_info(void)
return 0;
}
-
-/**
- * soc_clk_dump() - Print clock frequencies
- * Returns zero on success
- *
- * Implementation for the clk dump command.
- */
-int soc_clk_dump(void)
-{
- struct udevice *dev;
- int i, ret;
-
- ret = uclass_get_device_by_driver(UCLASS_CLK,
- DM_DRIVER_GET(zynq_clk), &dev);
- if (ret)
- return ret;
-
- printf("clk\t\tfrequency\n");
- for (i = 0; i < clk_max; i++) {
- const char *name = clk_names[i];
- if (name) {
- struct clk clk;
- unsigned long rate;
-
- clk.id = i;
- ret = clk_request(dev, &clk);
- if (ret < 0)
- return ret;
-
- rate = clk_get_rate(&clk);
-
- clk_free(&clk);
-
- if ((rate == (unsigned long)-ENOSYS) ||
- (rate == (unsigned long)-ENXIO))
- printf("%10s%20s\n", name, "unknown");
- else
- printf("%10s%20lu\n", name, rate);
- }
- }
-
- return 0;
-}
diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c
index e80500e382..be5226175f 100644
--- a/drivers/clk/clk_zynq.c
+++ b/drivers/clk/clk_zynq.c
@@ -454,6 +454,64 @@ static int dummy_enable(struct clk *clk)
return 0;
}
+static const char * const clk_names[clk_max] = {
+ "armpll", "ddrpll", "iopll",
+ "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
+ "ddr2x", "ddr3x", "dci",
+ "lqspi", "smc", "pcap", "gem0", "gem1",
+ "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+ "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma",
+ "usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper",
+ "sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper",
+ "can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper",
+ "uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper",
+ "smc_aper", "swdt", "dbg_trc", "dbg_apb"
+};
+
+/**
+ * soc_clk_dump() - Print clock frequencies
+ * Returns zero on success
+ *
+ * Implementation for the clk dump command.
+ */
+int soc_clk_dump(void)
+{
+ struct udevice *dev;
+ int i, ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_DRIVER_GET(zynq_clk), &dev);
+ if (ret)
+ return ret;
+
+ printf("clk\t\tfrequency\n");
+ for (i = 0; i < clk_max; i++) {
+ const char *name = clk_names[i];
+
+ if (name) {
+ struct clk clk;
+ unsigned long rate;
+
+ clk.id = i;
+ ret = clk_request(dev, &clk);
+ if (ret < 0)
+ return ret;
+
+ rate = clk_get_rate(&clk);
+
+ clk_free(&clk);
+
+ if ((rate == (unsigned long)-ENOSYS) ||
+ (rate == (unsigned long)-ENXIO))
+ printf("%10s%20s\n", name, "unknown");
+ else
+ printf("%10s%20lu\n", name, rate);
+ }
+ }
+
+ return 0;
+}
+
static struct clk_ops zynq_clk_ops = {
.get_rate = zynq_clk_get_rate,
#ifndef CONFIG_SPL_BUILD
--
2.34.1
