Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.

Signed-off-by: Igor Prusov <ivpru...@sberdevices.ru>
---
 drivers/clk/clk_k210.c | 92 +++++++++++++++++++++---------------------
 1 file changed, 46 insertions(+), 46 deletions(-)

diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c
index c534cc07e0..2f17152021 100644
--- a/drivers/clk/clk_k210.c
+++ b/drivers/clk/clk_k210.c
@@ -1238,52 +1238,6 @@ static int k210_clk_request(struct clk *clk)
        return 0;
 }
 
-static const struct clk_ops k210_clk_ops = {
-       .request = k210_clk_request,
-       .set_rate = k210_clk_set_rate,
-       .get_rate = k210_clk_get_rate,
-       .set_parent = k210_clk_set_parent,
-       .enable = k210_clk_enable,
-       .disable = k210_clk_disable,
-};
-
-static int k210_clk_probe(struct udevice *dev)
-{
-       int ret;
-       struct k210_clk_priv *priv = dev_get_priv(dev);
-
-       priv->base = dev_read_addr_ptr(dev_get_parent(dev));
-       if (!priv->base)
-               return -EINVAL;
-
-       ret = clk_get_by_index(dev, 0, &priv->in0);
-       if (ret)
-               return ret;
-
-       /*
-        * Force setting defaults, even before relocation. This is so we can
-        * set the clock rate for PLL1 before we relocate into aisram.
-        */
-       if (!(gd->flags & GD_FLG_RELOC))
-               clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
-
-       return 0;
-}
-
-static const struct udevice_id k210_clk_ids[] = {
-       { .compatible = "canaan,k210-clk" },
-       { },
-};
-
-U_BOOT_DRIVER(k210_clk) = {
-       .name = "k210_clk",
-       .id = UCLASS_CLK,
-       .of_match = k210_clk_ids,
-       .ops = &k210_clk_ops,
-       .probe = k210_clk_probe,
-       .priv_auto = sizeof(struct k210_clk_priv),
-};
-
 #if IS_ENABLED(CONFIG_CMD_CLK)
 static char show_enabled(struct k210_clk_priv *priv, int id)
 {
@@ -1342,3 +1296,49 @@ int soc_clk_dump(void)
        return 0;
 }
 #endif
+
+static const struct clk_ops k210_clk_ops = {
+       .request = k210_clk_request,
+       .set_rate = k210_clk_set_rate,
+       .get_rate = k210_clk_get_rate,
+       .set_parent = k210_clk_set_parent,
+       .enable = k210_clk_enable,
+       .disable = k210_clk_disable,
+};
+
+static int k210_clk_probe(struct udevice *dev)
+{
+       int ret;
+       struct k210_clk_priv *priv = dev_get_priv(dev);
+
+       priv->base = dev_read_addr_ptr(dev_get_parent(dev));
+       if (!priv->base)
+               return -EINVAL;
+
+       ret = clk_get_by_index(dev, 0, &priv->in0);
+       if (ret)
+               return ret;
+
+       /*
+        * Force setting defaults, even before relocation. This is so we can
+        * set the clock rate for PLL1 before we relocate into aisram.
+        */
+       if (!(gd->flags & GD_FLG_RELOC))
+               clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
+
+       return 0;
+}
+
+static const struct udevice_id k210_clk_ids[] = {
+       { .compatible = "canaan,k210-clk" },
+       { },
+};
+
+U_BOOT_DRIVER(k210_clk) = {
+       .name = "k210_clk",
+       .id = UCLASS_CLK,
+       .of_match = k210_clk_ids,
+       .ops = &k210_clk_ops,
+       .probe = k210_clk_probe,
+       .priv_auto = sizeof(struct k210_clk_priv),
+};
-- 
2.34.1

Reply via email to