The default Ten64 MTD configuration reserves two ubifs partitions
for OpenWrt residing on NAND flash. Add the bootcmd for this system
into the default environment.
Signed-off-by: Mathew McBride <m...@traverse.com.au>
---
include/configs/ten64.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ten64.h b/include/configs/ten64.h
index 1b8b27c230..f9e800d4b6 100644
--- a/include/configs/ten64.h
+++ b/include/configs/ten64.h
@@ -39,6 +39,11 @@
func(PXE, pxe, 0)
#include <config_distro_bootcmd.h>
+#define OPENWRT_NAND_BOOTCMD \
+ "bootcmd_openwrt_nand=ubi part ubi${openwrt_active_sys} && "\
+ "ubi read $load_addr kernel && " \
+ "setenv bootargs \"root=/dev/ubiblock0_1 earlycon
ubi.mtd=ubi${openwrt_active_sys}\" &&"\
+ "bootm $load_addr#ten64\0"
#undef CFG_EXTRA_ENV_SETTINGS
#define CFG_EXTRA_ENV_SETTINGS \
@@ -48,6 +53,8 @@
"kernel_addr_r=0x81000000\0" \
"load_addr=0xa0000000\0" \
BOOTENV \
+ OPENWRT_NAND_BOOTCMD \
+ "openwrt_active_sys=a\0" \
"load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r
&& " \
"fdt resize && fdt boardsetup\0" \
"bootcmd_recovery=mtd read recovery 0xa0000000 && " \
--
2.30.1
