The recovery-firmware and OpenWrt-NAND do not yet have bootflow
/bootstd entrypoints, so add bootmenu entries to make them
accessible.
Signed-off-by: Mathew McBride <m...@traverse.com.au>
---
include/configs/ten64.h | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/include/configs/ten64.h b/include/configs/ten64.h
index f9e800d4b6..d2bef9b6e5 100644
--- a/include/configs/ten64.h
+++ b/include/configs/ten64.h
@@ -46,6 +46,15 @@
"bootm $load_addr#ten64\0"
#undef CFG_EXTRA_ENV_SETTINGS
+#if CONFIG_IS_ENABLED(CMD_BOOTMENU)
+#define DEFAULT_MENU_ENTRIES \
+ "bootmenu_0=Continue standard boot=run bootcmd\0" \
+ "bootmenu_1=Boot into recovery=run bootcmd_recovery\0" \
+ "bootmenu_2=Boot OpenWrt from NAND=run bootcmd_openwrt_nand\0"
+#else
+#define DEFAULT_MENU_ENTRIES ""
+#endif /* CONFIG_IS_ENABLED(CMD_BOOTMENU) */
+
#define CFG_EXTRA_ENV_SETTINGS \
"BOARD=ten64\0" \
"fdt_addr_r=0x90000000\0" \
@@ -57,7 +66,8 @@
"openwrt_active_sys=a\0" \
"load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r
&& " \
"fdt resize && fdt boardsetup\0" \
- "bootcmd_recovery=mtd read recovery 0xa0000000 && " \
- "setenv bootargs \"earlycon root=/dev/ram0 ramdisk_size=0x3000000\" &&
bootm 0xa0000000#ten64\0"
+ "bootcmd_recovery=mtd read recovery 0xa0000000; " \
+ "setenv bootargs \"earlycon root=/dev/ram0 ramdisk_size=0x3000000\" &&
bootm 0xa0000000#ten64\0" \
+ DEFAULT_MENU_ENTRIES
#endif /* __TEN64_H */
--
2.30.1
