I'm not responsible for k3, so do not send me these emails.
On Friday 28 July 2023 22:54:53 Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > This series adds initial support for the Toradex Verdin AM62 SoM [1]. > The first commit adds resp. PID4s to the ConfigBlock, the second one > fixes an early clocking issue confirmed to be a weird bug in TI's > scripting. And last but not least support for the Toradex Verdin AM62 > is added. > > [1] https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 > > Changes in v4: > - Re-based on top of master with recent binman integration, mac_efuse, > cpsw-phy-sel and mdio clean-up and dtsi bump from linux v6.5-rc1. > - Verdin AM62 binman enablement and further clean-up after re-base. > - Removed all ifdefs from DTs now with bumped Linux dtsi. > - Avoid relocated U-Boot and DT reserved-memory clash. > - Enable of_system_setup. > > Changes in v3: > - Add Verdin AM62 launch configuration SKUs as well. > - Integrate our recent find of CTRL_SLEEP_MOCI# needing to be driven > from A53 SPL as it may be used to control some power-rails on the > carrier board. E.g. on the Yavia carrier board it is needed to power > the I2C EEPROM on the carrier board. > - Improve boot environment in R5 SPL vs. A53. > - Integrate launch configuration SKUs to Wi-Fi handling. > - Re-sync device trees from Linux kernel v6.5-rc1. > - Add warning if memory is less than expected. > > Changes in v2: > - Add Bryan's reviewed-by tag. Thanks! > - Use 1.2 GHz rather than 1.25 GHz A53 clock as on the EVM/SK. > - Also add power-domain 166 as on the EVM/SK. > - Get rid of main_bcdma and main_pktdma as not required in R5 SPL. > - Get rid of all bootph-pre-ram in Ethernet and SDHC1 aka SD card > related pinctrls as not required in any SPL. > - Enable CONFIG_TI_SECURE_DEVICE by default as Non-HS devices will > continue to boot due to runtime device type detection. > - Disable FAT and SPI support as not required in R5 SPL. > - Also enable CONFIG_SPL_MMC_HS200_SUPPORT in R5 SPL. > - Enable CONFIG_LEGACY_IMAGE_FORMAT to allow sourcing unsigned script > images e.g. like our current boot scripts. > - Increase CONFIG_SYS_BOOTM_LEN to 64 MB to allow booting bigger > compressed images as e.g. in the Toradex Easy Installer case. > - Change memory configurations to operate at temperatures of up to 95 > degrees celsius. > - Increase CONFIG_SYS_MAXARGS from default 16 to 64. > - Enable CONFIG_CMD_REMOTEPROC, CONFIG_SPL_DM_GPIO_LOOKUP_LABEL and > CONFIG_SPL_I2C_EEPROM. > - For R5 SPL increase CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN to 0x140000, > enable CONFIG_SPL_I2C, CONFIG_DM_I2C and CONFIG_SYS_I2C_OMAP24XX and > savedefconfig got rid of CONFIG_SPL_FIT_IMAGE_POST_PROCESS. > > Marcel Ziswiler (3): > toradex: tdx-cfg-block: add verdin am62 skus > arm: mach-k3: am62: fix 2nd mux option of clkout0 > board: toradex: add verdin am62 support > > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/k3-am62-verdin-dev.dtsi | 192 ++ > arch/arm/dts/k3-am62-verdin-wifi.dtsi | 39 + > arch/arm/dts/k3-am62-verdin.dtsi | 1405 +++++++++++ > .../dts/k3-am625-verdin-lpddr4-1600MTs.dtsi | 2190 +++++++++++++++++ > arch/arm/dts/k3-am625-verdin-r5.dts | 116 + > .../dts/k3-am625-verdin-wifi-dev-binman.dtsi | 570 +++++ > .../dts/k3-am625-verdin-wifi-dev-u-boot.dtsi | 201 ++ > arch/arm/dts/k3-am625-verdin-wifi-dev.dts | 22 + > arch/arm/mach-k3/Kconfig | 1 + > arch/arm/mach-k3/am62x/clk-data.c | 5 +- > board/toradex/common/tdx-cfg-block.c | 7 + > board/toradex/common/tdx-cfg-block.h | 10 +- > board/toradex/verdin-am62/Kconfig | 82 + > board/toradex/verdin-am62/MAINTAINERS | 17 + > board/toradex/verdin-am62/Makefile | 6 + > board/toradex/verdin-am62/board-cfg.yaml | 36 + > board/toradex/verdin-am62/pm-cfg.yaml | 12 + > board/toradex/verdin-am62/rm-cfg.yaml | 1088 ++++++++ > board/toradex/verdin-am62/sec-cfg.yaml | 379 +++ > board/toradex/verdin-am62/verdin-am62.c | 131 + > configs/verdin-am62_a53_defconfig | 187 ++ > configs/verdin-am62_r5_defconfig | 111 + > doc/board/toradex/verdin-am62.rst | 169 ++ > include/configs/verdin-am62.h | 55 + > 25 files changed, 7030 insertions(+), 5 deletions(-) > create mode 100644 arch/arm/dts/k3-am62-verdin-dev.dtsi > create mode 100644 arch/arm/dts/k3-am62-verdin-wifi.dtsi > create mode 100644 arch/arm/dts/k3-am62-verdin.dtsi > create mode 100644 arch/arm/dts/k3-am625-verdin-lpddr4-1600MTs.dtsi > create mode 100644 arch/arm/dts/k3-am625-verdin-r5.dts > create mode 100644 arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi > create mode 100644 arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi > create mode 100644 arch/arm/dts/k3-am625-verdin-wifi-dev.dts > create mode 100644 board/toradex/verdin-am62/Kconfig > create mode 100644 board/toradex/verdin-am62/MAINTAINERS > create mode 100644 board/toradex/verdin-am62/Makefile > create mode 100644 board/toradex/verdin-am62/board-cfg.yaml > create mode 100644 board/toradex/verdin-am62/pm-cfg.yaml > create mode 100644 board/toradex/verdin-am62/rm-cfg.yaml > create mode 100644 board/toradex/verdin-am62/sec-cfg.yaml > create mode 100644 board/toradex/verdin-am62/verdin-am62.c > create mode 100644 configs/verdin-am62_a53_defconfig > create mode 100644 configs/verdin-am62_r5_defconfig > create mode 100644 doc/board/toradex/verdin-am62.rst > create mode 100644 include/configs/verdin-am62.h > > -- > 2.36.1 >
