Sorry about that. Looks like patman somehow choose you. I will add a rule to no longer do that. Thanks!
On August 6, 2023 12:58:29 PM GMT+02:00, "Pali Rohár" <p...@kernel.org> wrote: >I'm not responsible for k3, so do not send me these emails. > >On Friday 28 July 2023 22:54:53 Marcel Ziswiler wrote: >> From: Marcel Ziswiler <marcel.ziswi...@toradex.com> >> >> >> This series adds initial support for the Toradex Verdin AM62 SoM [1]. >> The first commit adds resp. PID4s to the ConfigBlock, the second one >> fixes an early clocking issue confirmed to be a weird bug in TI's >> scripting. And last but not least support for the Toradex Verdin AM62 >> is added. >> >> [1] https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 >> >> Changes in v4: >> - Re-based on top of master with recent binman integration, mac_efuse, >> cpsw-phy-sel and mdio clean-up and dtsi bump from linux v6.5-rc1. >> - Verdin AM62 binman enablement and further clean-up after re-base. >> - Removed all ifdefs from DTs now with bumped Linux dtsi. >> - Avoid relocated U-Boot and DT reserved-memory clash. >> - Enable of_system_setup. >> >> Changes in v3: >> - Add Verdin AM62 launch configuration SKUs as well. >> - Integrate our recent find of CTRL_SLEEP_MOCI# needing to be driven >> from A53 SPL as it may be used to control some power-rails on the >> carrier board. E.g. on the Yavia carrier board it is needed to power >> the I2C EEPROM on the carrier board. >> - Improve boot environment in R5 SPL vs. A53. >> - Integrate launch configuration SKUs to Wi-Fi handling. >> - Re-sync device trees from Linux kernel v6.5-rc1. >> - Add warning if memory is less than expected. >> >> Changes in v2: >> - Add Bryan's reviewed-by tag. Thanks! >> - Use 1.2 GHz rather than 1.25 GHz A53 clock as on the EVM/SK. >> - Also add power-domain 166 as on the EVM/SK. >> - Get rid of main_bcdma and main_pktdma as not required in R5 SPL. >> - Get rid of all bootph-pre-ram in Ethernet and SDHC1 aka SD card >> related pinctrls as not required in any SPL. >> - Enable CONFIG_TI_SECURE_DEVICE by default as Non-HS devices will >> continue to boot due to runtime device type detection. >> - Disable FAT and SPI support as not required in R5 SPL. >> - Also enable CONFIG_SPL_MMC_HS200_SUPPORT in R5 SPL. >> - Enable CONFIG_LEGACY_IMAGE_FORMAT to allow sourcing unsigned script >> images e.g. like our current boot scripts. >> - Increase CONFIG_SYS_BOOTM_LEN to 64 MB to allow booting bigger >> compressed images as e.g. in the Toradex Easy Installer case. >> - Change memory configurations to operate at temperatures of up to 95 >> degrees celsius. >> - Increase CONFIG_SYS_MAXARGS from default 16 to 64. >> - Enable CONFIG_CMD_REMOTEPROC, CONFIG_SPL_DM_GPIO_LOOKUP_LABEL and >> CONFIG_SPL_I2C_EEPROM. >> - For R5 SPL increase CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN to 0x140000, >> enable CONFIG_SPL_I2C, CONFIG_DM_I2C and CONFIG_SYS_I2C_OMAP24XX and >> savedefconfig got rid of CONFIG_SPL_FIT_IMAGE_POST_PROCESS. >> >> Marcel Ziswiler (3): >> toradex: tdx-cfg-block: add verdin am62 skus >> arm: mach-k3: am62: fix 2nd mux option of clkout0 >> board: toradex: add verdin am62 support >> >> arch/arm/dts/Makefile | 4 +- >> arch/arm/dts/k3-am62-verdin-dev.dtsi | 192 ++ >> arch/arm/dts/k3-am62-verdin-wifi.dtsi | 39 + >> arch/arm/dts/k3-am62-verdin.dtsi | 1405 +++++++++++ >> .../dts/k3-am625-verdin-lpddr4-1600MTs.dtsi | 2190 +++++++++++++++++ >> arch/arm/dts/k3-am625-verdin-r5.dts | 116 + >> .../dts/k3-am625-verdin-wifi-dev-binman.dtsi | 570 +++++ >> .../dts/k3-am625-verdin-wifi-dev-u-boot.dtsi | 201 ++ >> arch/arm/dts/k3-am625-verdin-wifi-dev.dts | 22 + >> arch/arm/mach-k3/Kconfig | 1 + >> arch/arm/mach-k3/am62x/clk-data.c | 5 +- >> board/toradex/common/tdx-cfg-block.c | 7 + >> board/toradex/common/tdx-cfg-block.h | 10 +- >> board/toradex/verdin-am62/Kconfig | 82 + >> board/toradex/verdin-am62/MAINTAINERS | 17 + >> board/toradex/verdin-am62/Makefile | 6 + >> board/toradex/verdin-am62/board-cfg.yaml | 36 + >> board/toradex/verdin-am62/pm-cfg.yaml | 12 + >> board/toradex/verdin-am62/rm-cfg.yaml | 1088 ++++++++ >> board/toradex/verdin-am62/sec-cfg.yaml | 379 +++ >> board/toradex/verdin-am62/verdin-am62.c | 131 + >> configs/verdin-am62_a53_defconfig | 187 ++ >> configs/verdin-am62_r5_defconfig | 111 + >> doc/board/toradex/verdin-am62.rst | 169 ++ >> include/configs/verdin-am62.h | 55 + >> 25 files changed, 7030 insertions(+), 5 deletions(-) >> create mode 100644 arch/arm/dts/k3-am62-verdin-dev.dtsi >> create mode 100644 arch/arm/dts/k3-am62-verdin-wifi.dtsi >> create mode 100644 arch/arm/dts/k3-am62-verdin.dtsi >> create mode 100644 arch/arm/dts/k3-am625-verdin-lpddr4-1600MTs.dtsi >> create mode 100644 arch/arm/dts/k3-am625-verdin-r5.dts >> create mode 100644 arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi >> create mode 100644 arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi >> create mode 100644 arch/arm/dts/k3-am625-verdin-wifi-dev.dts >> create mode 100644 board/toradex/verdin-am62/Kconfig >> create mode 100644 board/toradex/verdin-am62/MAINTAINERS >> create mode 100644 board/toradex/verdin-am62/Makefile >> create mode 100644 board/toradex/verdin-am62/board-cfg.yaml >> create mode 100644 board/toradex/verdin-am62/pm-cfg.yaml >> create mode 100644 board/toradex/verdin-am62/rm-cfg.yaml >> create mode 100644 board/toradex/verdin-am62/sec-cfg.yaml >> create mode 100644 board/toradex/verdin-am62/verdin-am62.c >> create mode 100644 configs/verdin-am62_a53_defconfig >> create mode 100644 configs/verdin-am62_r5_defconfig >> create mode 100644 doc/board/toradex/verdin-am62.rst >> create mode 100644 include/configs/verdin-am62.h >> >> -- >> 2.36.1 >> -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
