On 02/10/23 19:34, Jerome Forissier wrote:
Hello Apurva, On 10/1/23 18:55, Apurva Nandan wrote:Introduce the base dts files needed for u-boot or to augment the linux dtbs for use in the u-boot-spl and u-boot binaries. Signed-off-by: Hari Nagalla <hnaga...@ti.com> [ add binman and ddr dtsi files ] Signed-off-by: Neha Malcom Francis <n-fran...@ti.com> Signed-off-by: Apurva Nandan <a-nan...@ti.com> Signed-off-by: Dasnavis Sabiya <sabiy...@ti.com> --- arch/arm/dts/Makefile | 2 + arch/arm/dts/k3-j784s4-binman.dtsi | 505 + arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi | 8757 +++++++++++++++++ arch/arm/dts/k3-j784s4-ddr.dtsi | 8858 ++++++++++++++++++ arch/arm/dts/k3-j784s4-evm-u-boot.dtsi | 25 + arch/arm/dts/k3-j784s4-r5-evm.dts | 105 + 6 files changed, 18252 insertions(+) create mode 100644 arch/arm/dts/k3-j784s4-binman.dtsi create mode 100644 arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi create mode 100644 arch/arm/dts/k3-j784s4-ddr.dtsi create mode 100644 arch/arm/dts/k3-j784s4-evm-u-boot.dtsi create mode 100644 arch/arm/dts/k3-j784s4-r5-evm.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 85fd5b1157..21cfebff58 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1327,6 +1327,8 @@ dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\ k3-am68-sk-r5-base-board.dtb\ k3-j721s2-common-proc-board.dtb\ k3-j721s2-r5-common-proc-board.dtb +dtb-$(CONFIG_SOC_K3_J784S4) += k3-j784s4-evm.dtb\ + k3-j784s4-r5-evm.dtb dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \ k3-am642-r5-evm.dtb \ k3-am642-sk.dtb \ diff --git a/arch/arm/dts/k3-j784s4-binman.dtsi b/arch/arm/dts/k3-j784s4-binman.dtsi new file mode 100644 index 0000000000..f9b191424c --- /dev/null +++ b/arch/arm/dts/k3-j784s4-binman.dtsi @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */<snip>+&binman { + ti-spl_unsigned { + filename = "tispl.bin_unsigned"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + + atf-bl31 { + filename = "bl31.bin"; + }; + }; + + tee { + description = "OPTEE";The official spelling is "OP-TEE".+ type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + + tee-os { + filename = "tee-pager_v2.bin";Since OP-TEE 3.21.0 this could/should be replaced with tee-raw.bin. Although tee-pager_v2.bin is still produced unconditionally (even when the "pager" feature is disabled in OP-TEE) it might not be the case in the future, and the name is somewhat misleading when pager is disabled anyways (which is clearly the case here since tee-pageable_v2.bin is not used). Thanks,
Okay will fix it -- Regards, Apurva Nandan, Texas Instruments.
