On 11:56-20231004, Reid Tonking wrote: > Sync j7200 dts with Linux 6.6-rc1 [..] > diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts > b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts > index e62f9218e8..9469dca39f 100644 > --- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts > +++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts > @@ -1,13 +1,14 @@ > // SPDX-License-Identifier: GPL-2.0 > /* > - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ > + * Copyright (C) 2020-2023 Texas Instruments Incorporated - > https://www.ti.com/ > */ > > /dts-v1/; > > -#include "k3-j7200-som-p0.dtsi" > +#include "k3-j7200-common-proc-board.dts" > #include "k3-j7200-ddr-evm-lp4-2666.dtsi" > #include "k3-j721e-ddr.dtsi" > +#include "k3-j7200-common-proc-board-u-boot.dtsi" > > / { > aliases { > @@ -15,17 +16,6 @@ > remoteproc1 = &a72_0; > }; > > - chosen { > - stdout-path = &main_uart0; > - tick-timer = &timer1; > - firmware-loader = &fs_loader0; > - }; > - > - fs_loader0: fs_loader@0 { > - bootph-all; > - compatible = "u-boot,fs-loader"; > - }; > - > a72_0: a72@0 { > compatible = "ti,am654-rproc"; > reg = <0x0 0x00a90000 0x0 0x10>; > @@ -39,21 +29,17 @@ > ti,sci = <&dmsc>; > ti,sci-proc-id = <32>; > ti,sci-host-id = <10>; > - bootph-pre-ram; > - }; > - > - clk_200mhz: dummy_clock_200mhz { > - compatible = "fixed-clock"; > - #clock-cells = <0>; > - clock-frequency = <200000000>; > - bootph-pre-ram; > + bootph-all;
Here and else where in the r5 file: why switch from pre-ram to bootph-all ? dont we need these prior to ddr initialization? [...] -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
