Add templates for FIT images used extensively across K3 boards with most
of the code common. This includes the FIT portions of:
- tispl.bin
- u-boot.img
- sysfw.itb (in case of legacy boot flow)
Signed-off-by: Neha Malcom Francis <n-fran...@ti.com>
---
arch/arm/dts/k3-binman.dtsi | 327 ++++++++++++++++++++++++++++++++++++
1 file changed, 327 insertions(+)
diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
index 2ea2dd18a1..677a017403 100644
--- a/arch/arm/dts/k3-binman.dtsi
+++ b/arch/arm/dts/k3-binman.dtsi
@@ -113,4 +113,331 @@
};
};
+&binman {
+ itb_template: template-5 {
+ fit {
+ description = "SYSFW and Config fragments";
+ #address-cells = <1>;
+ images {
+ sysfw.bin {
+ description = "sysfw";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ blob-ext {
+ filename = "sysfw.bin";
+ };
+ };
+ board-cfg.bin {
+ description = "board-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ ti-secure {
+ content = <&board_cfg>;
+ keyfile = "custMpk.pem";
+ };
+ board_cfg: board-cfg {
+ filename = "board-cfg.bin";
+ type = "blob-ext";
+ };
+
+ };
+ pm-cfg.bin {
+ description = "pm-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ ti-secure {
+ content = <&pm_cfg>;
+ keyfile = "custMpk.pem";
+ };
+ pm_cfg: pm-cfg {
+ filename = "pm-cfg.bin";
+ type = "blob-ext";
+ };
+ };
+ rm-cfg.bin {
+ description = "rm-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ ti-secure {
+ content = <&rm_cfg>;
+ keyfile = "custMpk.pem";
+ };
+ rm_cfg: rm-cfg {
+ filename = "rm-cfg.bin";
+ type = "blob-ext";
+ };
+ };
+ sec-cfg.bin {
+ description = "sec-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ ti-secure {
+ content = <&sec_cfg>;
+ keyfile = "custMpk.pem";
+ };
+ sec_cfg: sec-cfg {
+ filename = "sec-cfg.bin";
+ type = "blob-ext";
+ };
+ };
+ };
+ };
+ };
+
+ itb_unsigned_template: template-6 {
+ fit {
+ description = "SYSFW and Config fragments";
+ #address-cells = <1>;
+ images {
+ sysfw.bin {
+ description = "sysfw";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ blob-ext {
+ filename = "sysfw.bin_fs";
+ };
+ };
+ board-cfg.bin {
+ description = "board-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ board-cfg {
+ filename = "board-cfg.bin";
+ type = "blob-ext";
+ };
+
+ };
+ pm-cfg.bin {
+ description = "pm-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ pm-cfg {
+ filename = "pm-cfg.bin";
+ type = "blob-ext";
+ };
+ };
+ rm-cfg.bin {
+ description = "rm-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ rm-cfg {
+ filename = "rm-cfg.bin";
+ type = "blob-ext";
+ };
+ };
+ sec-cfg.bin {
+ description = "sec-cfg";
+ type = "firmware";
+ arch = "arm";
+ compression = "none";
+ sec-cfg {
+ filename = "sec-cfg.bin";
+ type = "blob-ext";
+ };
+ };
+ };
+ };
+ };
+};
+
+#else
+
+&binman {
+ ti_spl_template: template-1 {
+ filename = "tispl.bin";
+ pad-byte = <0xff>;
+
+ fit {
+ description = "Configuration to load ATF and SPL";
+ #address-cells = <1>;
+
+ images {
+
+ atf {
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ os = "arm-trusted-firmware";
+ load = <CONFIG_K3_ATF_LOAD_ADDR>;
+ entry = <CONFIG_K3_ATF_LOAD_ADDR>;
+ ti-secure {
+ content = <&atf>;
+ keyfile = "custMpk.pem";
+ };
+ atf: atf-bl31 {
+ };
+ };
+
+ tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+ load = <0x9e800000>;
+ entry = <0x9e800000>;
+ ti-secure {
+ content = <&tee>;
+ keyfile = "custMpk.pem";
+ };
+ tee: tee-os {
+ };
+ };
+
+ dm {
+ description = "DM binary";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "DM";
+ load = <0x89000000>;
+ entry = <0x89000000>;
+ };
+
+ spl {
+ description = "SPL (64-bit)";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm64";
+ compression = "none";
+ load = <CONFIG_SPL_TEXT_BASE>;
+ entry = <CONFIG_SPL_TEXT_BASE>;
+ ti-secure {
+ content = <&u_boot_spl_nodtb>;
+ keyfile = "custMpk.pem";
+
+ };
+ u_boot_spl_nodtb: blob-ext {
+ filename =
"spl/u-boot-spl-nodtb.bin";
+ };
+ };
+
+ };
+ };
+ };
+ ti_spl_unsigned_template: template-2 {
+ filename = "tispl.bin_unsigned";
+ pad-byte = <0xff>;
+
+ fit {
+ description = "Configuration to load ATF and SPL";
+ #address-cells = <1>;
+
+ images {
+
+ atf {
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ os = "arm-trusted-firmware";
+ load = <CONFIG_K3_ATF_LOAD_ADDR>;
+ entry = <CONFIG_K3_ATF_LOAD_ADDR>;
+ atf-bl31 {
+ filename = "bl31.bin";
+ };
+ };
+
+ tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+ load = <0x9e800000>;
+ entry = <0x9e800000>;
+ tee-os {
+ filename = "tee-raw.bin";
+ };
+ };
+
+ dm {
+ description = "DM binary";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "DM";
+ load = <0x89000000>;
+ entry = <0x89000000>;
+ };
+
+ spl {
+ description = "SPL (64-bit)";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm64";
+ compression = "none";
+ load = <CONFIG_SPL_TEXT_BASE>;
+ entry = <CONFIG_SPL_TEXT_BASE>;
+ blob-ext {
+ filename =
"spl/u-boot-spl-nodtb.bin";
+ };
+ };
+ };
+ };
+ };
+ u_boot_template: template-3 {
+ filename = "u-boot.img";
+ pad-byte = <0xff>;
+
+ fit {
+ description = "FIT image with multiple configurations";
+
+ images {
+ uboot {
+ type = "firmware";
+ os = "u-boot";
+ arch = "arm";
+ compression = "none";
+ load = <CONFIG_TEXT_BASE>;
+ ti-secure {
+ content = <&u_boot_nodtb>;
+ keyfile = "custMpk.pem";
+ };
+ u_boot_nodtb: u-boot-nodtb {
+ };
+ hash {
+ algo = "crc32";
+ };
+ };
+ };
+ };
+ };
+ u_boot_unsigned_template: template-4 {
+ filename = "u-boot.img_unsigned";
+ pad-byte = <0xff>;
+
+ fit {
+ description = "FIT image with multiple configurations";
+
+ images {
+ uboot {
+ type = "firmware";
+ os = "u-boot";
+ arch = "arm";
+ compression = "none";
+ load = <CONFIG_TEXT_BASE>;
+ blob {
+ filename = "u-boot-nodtb.bin";
+ };
+ hash {
+ algo = "crc32";
+ };
+ };
+ };
+ };
+ };
+
+};
+
#endif
--
2.34.1
