Hi Apurva Thanks for the update, however, it does not seem to compile. See below...
On Thu, 2023-11-30 at 17:25 +0530, Apurva Nandan wrote: > Add board files for J784S4 EVM. > > Signed-off-by: Hari Nagalla <hnaga...@ti.com> > [ add env and board specific yaml files for binman ] > Signed-off-by: Neha Malcom Francis <n-fran...@ti.com> > [ cleaned up the env files ] > Signed-off-by: Manorit Chawdhry <m-chawd...@ti.com> > Signed-off-by: Dasnavis Sabiya <sabiy...@ti.com> > Signed-off-by: Apurva Nandan <a-nan...@ti.com> > --- > arch/arm/mach-k3/Kconfig | 1 + > arch/arm/mach-k3/j784s4/Kconfig | 35 ++++++++++++++++++++++++++++++ > board/ti/j784s4/Makefile | 7 ++++++ > board/ti/j784s4/evm.c | 38 +++++++++++++++++++++++++++++++++ > include/configs/j784s4_evm.h | 20 +++++++++++++++++ > 5 files changed, 101 insertions(+) > create mode 100644 arch/arm/mach-k3/j784s4/Kconfig > create mode 100644 board/ti/j784s4/Makefile > create mode 100644 board/ti/j784s4/evm.c > create mode 100644 include/configs/j784s4_evm.h > > diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig > index 150d0bfa14..445b49e245 100644 > --- a/arch/arm/mach-k3/Kconfig > +++ b/arch/arm/mach-k3/Kconfig > @@ -157,5 +157,6 @@ source "arch/arm/mach-k3/am62x/Kconfig" > source "arch/arm/mach-k3/am62ax/Kconfig" > source "arch/arm/mach-k3/j721e/Kconfig" > source "arch/arm/mach-k3/j721s2/Kconfig" > +source "arch/arm/mach-k3/j784s4/Kconfig" > > endif > diff --git a/arch/arm/mach-k3/j784s4/Kconfig b/arch/arm/mach-k3/j784s4/Kconfig > new file mode 100644 > index 0000000000..03d3f91371 > --- /dev/null > +++ b/arch/arm/mach-k3/j784s4/Kconfig > @@ -0,0 +1,35 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later > +# > +# Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ > +# Hari Nagalla <hnaga...@ti.com> > + > +if SOC_K3_J784S4 > + > +choice > + prompt "K3 J784S4 board" > + optional > + > +config TARGET_J784S4_A72_EVM > + bool "TI K3 based J784S4 EVM running on A72" > + select ARM64 > + select BOARD_LATE_INIT > + select SYS_DISABLE_DCACHE_OPS > + select BINMAN > + > +config TARGET_J784S4_R5_EVM > + bool "TI K3 based J784S4 EVM running on R5" > + select CPU_V7R > + select SYS_THUMB_BUILD > + select K3_LOAD_SYSFW > + select RAM > + select SPL_RAM > + select K3_DDRSS > + select BINMAN > + imply SYS_K3_SPL_ATF > + > +endchoice > + > +source "board/ti/j784s4/Kconfig" Where exactly would that one come from? ⬢[zim@toolbox u-boot.git]$ make j784s4_evm_r5_defconfig HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o YACC scripts/kconfig/zconf.tab.c LEX scripts/kconfig/zconf.lex.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf arch/arm/mach-k3/j784s4/Kconfig:32: can't open file "board/ti/j784s4/Kconfig" make[1]: *** [scripts/kconfig/Makefile:96: j784s4_evm_r5_defconfig] Error 1 make: *** [Makefile:586: j784s4_evm_r5_defconfig] Error 2 > + > +endif > + > diff --git a/board/ti/j784s4/Makefile b/board/ti/j784s4/Makefile > new file mode 100644 > index 0000000000..3fc70eb8fb > --- /dev/null > +++ b/board/ti/j784s4/Makefile > @@ -0,0 +1,7 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later > +# > +# Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ > +# Hari Nagalla <hnaga...@ti.com> > +# > + > +obj-y += evm.o > diff --git a/board/ti/j784s4/evm.c b/board/ti/j784s4/evm.c > new file mode 100644 > index 0000000000..4857c9d2f6 > --- /dev/null > +++ b/board/ti/j784s4/evm.c > @@ -0,0 +1,38 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Board specific initialization for J784S4 EVM > + * > + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ > + * Hari Nagalla <hnaga...@ti.com> > + * > + */ > + > +#include <image.h> > +#include <init.h> > +#include <spl.h> > + > +DECLARE_GLOBAL_DATA_PTR; > + > +int board_init(void) > +{ > + return 0; > +} > + > +int dram_init(void) > +{ > + return fdtdec_setup_mem_size_base(); > +} > + > +int dram_init_banksize(void) > +{ > + return fdtdec_setup_memory_banksize(); > +} > + > +int board_late_init(void) > +{ > + return 0; > +} > + > +void spl_board_init(void) > +{ > +} > diff --git a/include/configs/j784s4_evm.h b/include/configs/j784s4_evm.h > new file mode 100644 > index 0000000000..1b780134ca > --- /dev/null > +++ b/include/configs/j784s4_evm.h > @@ -0,0 +1,20 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Configuration header file for K3 J784S4 EVM > + * > + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ > + * Hari Nagalla <hnaga...@ti.com> > + */ > + > +#ifndef __CONFIG_J784S4_EVM_H > +#define __CONFIG_J784S4_EVM_H > + > +#include <linux/sizes.h> > + > +/* DDR Configuration */ > +#define CFG_SYS_SDRAM_BASE1 0x880000000 > + > +/* Now for the remaining common defines */ > +#include <configs/ti_armv7_common.h> > + > +#endif /* __CONFIG_J784S4_EVM_H */ Cheers Marcel