On 00:45-20231220, Apurva Nandan wrote: > Hello Everyone! > > This series will introduce basic support (SD and UART) support for Texas > Instruments J784S4 EVM. > > The J784S4 SoC device tree patches are taken from kernel patch submissions > and will be updated as they are accepted and merged to the kernel tree. > All other patches are specific to SPL and u-boot and do not have > dependency on other trees. Appreciate a review for acceptance to u-boot > tree. > > Here are some of the salient features of the J784S4 automotive grade > application processor: > > The J784S4 SoC belongs to the K3 Multicore SoC architecture > platform, providing advanced system integration in automotive, > ADAS and industrial applications requiring AI at the network edge. > This SoC extends the K3 Jacinto 7 family of SoCs with focus on > raising performance and integration while providing interfaces, > memory architecture and compute performance for multi-sensor, high > concurrency applications. > Tried to apply this series on top of: next dffa6d0210f5 Merge tag 'dm-next-1124' of https://source.denx.de/u-boot/custodians/u-boot-dm into next
$ git am -3 v7_20231220_a_nandan_introduce_initial_ti_s_j784s4_and_am69_support.mbx Applying: arm: dts: Introduce j784s4 dts from linux kernel Applying: arm: dts: Introduce am69-sk dts from linux kernel Applying: arm: mach-k3: Add basic support for J784S4 SoC definition Applying: arm: mach-k3: Sort SoC JTAG_ID entries Applying: soc: ti: k3-socinfo: Add entry for J784S4 SoC Applying: arm: mach-k3: j784s4: Add clk and power support Applying: drivers: dma: Add support for J784S4 SoC Applying: board: ti: j784s4: Add board support for J784S4 EVM Applying: board: ti: j748s4: Add board config yaml files Applying: board: ti: j784s4: Add boot environment variables Applying: arm: dts: Introduce am69-sk u-boot dts files error: patch failed: arch/arm/dts/Makefile:1411 error: arch/arm/dts/Makefile: patch does not apply error: arch/arm/dts/k3-j784s4-binman.dtsi: does not exist in index Patch failed at 0011 arm: dts: Introduce am69-sk u-boot dts files hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". You will probably have to rebase this series once any review comments are addressed. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
