Hi Dragan,
On 2024-02-08 04:53, Dragan Simic wrote:
> Hello Jonas,
>
> On 2024-02-07 01:02, Jonas Karlman wrote:
>> Similar to RK35xx the BootRom in RK3328 can read all data and look for
>> idbloader at 0x8000, same as on SD and eMMC.
>>
>> Use the rksd format and modify the mkimage offset to generate a
>> bootable
>> u-boot-rockchip-spi.bin that can be written to 0x0 of SPI NOR flash.
>>
>> Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
>
> Could you, please, clarify a bit why the "rkspi" format isn't used
> instead of "rksd"?
Not really sure how I can clarify this.
As stated in commit message, the bootrom will read all bytes and use
same boot offset as the sd/emmc-format. The "legacy" spi-format only
read first 2kb of each 4kb of storage, see tools/rkspi.c.
A few bootrom versions:
- rk3288: 320A 20131116 V100
- rk3399: 330C 20160118 V100
- rk3328: 320C 20161117 V100
- rk3308: 330E 20180203 V100
I am not sure if the rkspi format must be used for all bootrom prior to
and including rk3399 and all versions after that should use the rksd
format. I have only ever used boot from spi flash on rk3399, rk3328 and
rk35xx. And for those that has been true.
Regards,
Jonas
>
>> ---
>> arch/arm/dts/rk3328-u-boot.dtsi | 11 +++++++++++
>> arch/arm/mach-rockchip/rk3328/rk3328.c | 1 +
>> 2 files changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/dts/rk3328-u-boot.dtsi
>> b/arch/arm/dts/rk3328-u-boot.dtsi
>> index b90d78878d77..2a5dca97dd4b 100644
>> --- a/arch/arm/dts/rk3328-u-boot.dtsi
>> +++ b/arch/arm/dts/rk3328-u-boot.dtsi
>> @@ -120,3 +120,14 @@
>> &usb20_otg {
>> hnp-srp-disable;
>> };
>> +
>> +#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
>> +&binman {
>> + simple-bin-spi {
>> + mkimage {
>> + args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
>> + offset = <0x8000>;
>> + };
>> + };
>> +};
>> +#endif
>> diff --git a/arch/arm/mach-rockchip/rk3328/rk3328.c
>> b/arch/arm/mach-rockchip/rk3328/rk3328.c
>> index b591d38fe412..b82b209de9e2 100644
>> --- a/arch/arm/mach-rockchip/rk3328/rk3328.c
>> +++ b/arch/arm/mach-rockchip/rk3328/rk3328.c
>> @@ -36,6 +36,7 @@
>>
>> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
>> [BROM_BOOTSOURCE_EMMC] = "/mmc@ff520000",
>> + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff190000/flash@0",
>> [BROM_BOOTSOURCE_SD] = "/mmc@ff500000",
>> };
