On Wed, 2024-02-21 at 15:31 +0100, Francesco Dolcini wrote: > On Wed, Feb 21, 2024 at 09:18:51AM +0000, Marcel Ziswiler wrote: > > On Wed, 2024-02-21 at 08:55 +0100, Francesco Dolcini wrote: > > > On Tue, Feb 20, 2024 at 06:40:56PM +0530, Sumit Garg wrote: > > > > Also, enable reset driver which is a prerequisite for PCIe support. > > > > > > > > Signed-off-by: Sumit Garg <sumit.g...@linaro.org> > > > > --- > > > > configs/verdin-imx8mp_defconfig | 9 +++++++++ > > > > 1 file changed, 9 insertions(+) > > > > > > > > diff --git a/configs/verdin-imx8mp_defconfig > > > > b/configs/verdin-imx8mp_defconfig > > > > index 22b8a334dfa..d8bd644322b 100644 > > > > --- a/configs/verdin-imx8mp_defconfig > > > > +++ b/configs/verdin-imx8mp_defconfig > > > > @@ -185,3 +185,12 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 > > > > CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 > > > > CONFIG_IMX_WATCHDOG=y > > > > CONFIG_HEXDUMP=y > > > > +CONFIG_DM_RESET=y > > > > +CONFIG_RESET_IMX=y > > > > +CONFIG_PCI=y > > > > +CONFIG_PCIE_DW_IMX8=y > > > > +CONFIG_PHY_IMX8M_PCIE=y > > > > +CONFIG_CMD_PCI=y > > > > +CONFIG_NVME=y > > > > +CONFIG_NVME_PCI=y > > > > +CONFIG_CMD_NVME=y > > > > > > This will increase the u-boot proper size > > > > Yes, I checked and it is actually slightly more than 32 K. > > > > > and marginally increase the > > > boot time (because of a bigger binary to be read from the eMMC). > > > > That was also my concern. > > > > > Apart of that do you expect any other impact on those changes? SPL > > > binary size should not be affected, correct? > > > > > > Asking this out loudly to confirm that nothing unexpected is going to > > > happen because of these changes. > > > > Other than that I actually gave it a quick try and PCIe/NVMe does indeed > > work and the regular boot is not > > affected (other than the slight size and boot time increase, of course). > > > > > For my curiosity, care to share what's the use case? Do you plan to have > > > the OS stored into an NVME device? > > > > For us the question is basically whether that use case does mandate > > enforcing such changes for each and every customer. Plus the regular > > expected maintenance effort any such change brings with it, of course. > > Marcel, given all you wrote here I would personally be fine > on having this enabled in the verdin_imx8mp defconfig. > > What's your idea? Are you good with it?
Yes, I do agree. > Francesco Cheers Marcel