On 08/04/11 02:01, Scott Wood wrote: > On Thu, 7 Apr 2011 09:11:03 +0200 > Wolfgang Denk <w...@denx.de> wrote: > >> Dear Scott Wood, >> >> In message <20110406233136.ga13...@schlenkerla.am.freescale.net> you wrote: >>> Currently, some linker scripts are found by common code in config.mk. >>> Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is >>> sometimes in arch config.mk and sometimes in board config.mk. Some >>> are found using an arch-specific rule for looking in CPUDIR, etc. >>> >>> Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL >>> when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact >>> that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. >>> >>> Replace all of this -- except for a handful of boards that are actually >>> selecting a linker script in a unique way -- with centralized ldscript >>> finding. >> >> Thanks for this nice cleanup. >> >> Only one question: Which boards / architectures did you cover during >> your tests? > > As I noted, I did a MAKEALL ppc and all the output (sizes, errors, etc) was > the same as before the patch. > > I tried a few arm boards, and all the ones I tried failed the same way they > did before the patch. I don't have toolchains for the other arches > readily available. Any help in testing this change on non-ppc would be > appreciated. >
I have tried this patch on all (two!) x86 configurations and looks good You may have my: Tested-by: Graeme Russ <graeme.r...@gmail.com> Regards, Graeme _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot