Re: [PATCH 11/19] ARM: dts: stm32: Add alternate pinmux for MP13 SAI1 pins

[Patrice CHOTARD]

On 4/22/24 01:16, Marek Vasut wrote:
> Add another mux option for SAI1 pins, this is used on
> DH electronics STM32MP13xx DHCOR DHSBC board.
> 
> Signed-off-by: Marek Vasut <ma...@denx.de>
> ---
> Cc: Patrice Chotard <patrice.chot...@foss.st.com>
> Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
> Cc: u-b...@dh-electronics.com
> Cc: uboot-st...@st-md-mailman.stormreply.com
> ---
>  arch/arm/dts/stm32mp13-pinctrl.dtsi | 32 +++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi 
> b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> index 77a222903de..f2b41104a58 100644
> --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> @@ -356,6 +356,38 @@
>               };
>       };
>  
> +     sai1a_pins_a: sai1a-0 {
> +             pins {
> +                     pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */
> +                              <STM32_PINMUX('D', 6, AF6)>, /* SAI1_SD_A */
> +                              <STM32_PINMUX('E', 11, AF6)>; /* SAI1_FS_A */
> +                     slew-rate = <0>;
> +                     drive-push-pull;
> +                     bias-disable;
> +             };
> +     };
> +
> +     sai1a_sleep_pins_a: sai1a-sleep-0 {
> +             pins {
> +                     pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* SAI1_SCK_A 
> */
> +                              <STM32_PINMUX('D', 6, ANALOG)>, /* SAI1_SD_A */
> +                              <STM32_PINMUX('E', 11, ANALOG)>; /* SAI1_FS_A 
> */
> +             };
> +     };
> +
> +     sai1b_pins_a: sai1b-0 {
> +             pins {
> +                     pinmux = <STM32_PINMUX('A', 0, AF6)>; /* SAI1_SD_B */
> +                     bias-disable;
> +             };
> +     };
> +
> +     sai1b_sleep_pins_a: sai1b-sleep-0 {
> +             pins {
> +                     pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* SAI1_SD_B */
> +             };
> +     };
> +
>       sdmmc1_b4_pins_a: sdmmc1-b4-0 {
>               pins {
>                       pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */

Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>

Thanks
Patrice