On 04/05/24 1:48 am, Tom Rini wrote:
On Fri, May 03, 2024 at 05:39:46PM +0530, Love Kumar wrote:
Add tests for booting image using tftpboot/pxe boot commands, tftpboot
boot case loads the FIT image into DDR and boots using bootm command
whereas pxe boot cases downloads the pxe configuration file from the
TFTP server and interprets it to boot the images mentioned in the pxe
configurations file.
This test relies on boardenv_* containing configuration values including
the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the
boot log pattern value is matched. For example, if the parameter
'pattern' is defined as 'login:', it will boot till login prompt.
Signed-off-by: Love Kumar <love.ku...@amd.com>
I'm not quite sure where the problem is, next. After enabling FIT image
support in my build so I can use the image I have on hand:
U-Boot> tftpboot 200000 v6.6/image.fit.nocomp
Waiting for Ethernet connection... done.
Using smsc95xx_eth device
TFTP from server 192.168.1.10; our IP address is 192.168.1.100
Filename 'v6.6/image.fit.nocomp'.
Load address: 0x200000
Loading: ################################################## 82 MiB
3.2 MiB/s
done
Bytes transferred = 85984256 (5200400 hex)
U-Boot> U-Boot> crc32 200000 $filesize
CRC32 for 00200000 ... 054003ff ==> 754c839a
U-Boot> U-Boot> bootm 200000
## Loading kernel from FIT Image at 00200000 ...
Could not find configuration node
ERROR -2: can't get kernel image!
U-Boot>
And in u_boot_boardenv_rpi_arm64.py:
env__tftp_boot_test_skip = False
env__net_tftp_bootable_file = {
'fn': 'v6.6/image.fit.nocomp',
'addr': 0x00200000,
'size': 85984256,
'crc32': '754c839a',
'pattern': 'Linux',
'config': 'conf-852',
}
But it's not trying to boot conf-852 but instead just passing the
address. This image lacks a default config, which your example has and I
think is why the tests work in your case.
Hi,
Yes, this case expects to have some default config in fit image as it
uses 'bootm <addr>' command to boot, below change in fit image should work.
configurations {
default = "conf-852";
test_net_tftpboot_boot_config - This case will boot from the given
config: 'bootm 200000#conf-852'
Regards,
Love Kumar
