On Tue, May 07, 2024 at 11:22:45AM +0530, Love Kumar wrote:
>
>
> On 04/05/24 1:48 am, Tom Rini wrote:
> > On Fri, May 03, 2024 at 05:39:46PM +0530, Love Kumar wrote:
> >
> > > Add tests for booting image using tftpboot/pxe boot commands, tftpboot
> > > boot case loads the FIT image into DDR and boots using bootm command
> > > whereas pxe boot cases downloads the pxe configuration file from the
> > > TFTP server and interprets it to boot the images mentioned in the pxe
> > > configurations file.
> > > This test relies on boardenv_* containing configuration values including
> > > the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the
> > > boot log pattern value is matched. For example, if the parameter
> > > 'pattern' is defined as 'login:', it will boot till login prompt.
> > >
> > > Signed-off-by: Love Kumar <love.ku...@amd.com>
> >
> > I'm not quite sure where the problem is, next. After enabling FIT image
> > support in my build so I can use the image I have on hand:
> > U-Boot> tftpboot 200000 v6.6/image.fit.nocomp
> > Waiting for Ethernet connection... done.
> > Using smsc95xx_eth device
> > TFTP from server 192.168.1.10; our IP address is 192.168.1.100
> > Filename 'v6.6/image.fit.nocomp'.
> > Load address: 0x200000
> > Loading: ################################################## 82 MiB
> > 3.2 MiB/s
> > done
> > Bytes transferred = 85984256 (5200400 hex)
> > U-Boot> U-Boot> crc32 200000 $filesize
> > CRC32 for 00200000 ... 054003ff ==> 754c839a
> > U-Boot> U-Boot> bootm 200000
> > ## Loading kernel from FIT Image at 00200000 ...
> > Could not find configuration node
> > ERROR -2: can't get kernel image!
> > U-Boot>
> >
> > And in u_boot_boardenv_rpi_arm64.py:
> > env__tftp_boot_test_skip = False
> >
> > env__net_tftp_bootable_file = {
> > 'fn': 'v6.6/image.fit.nocomp',
> > 'addr': 0x00200000,
> > 'size': 85984256,
> > 'crc32': '754c839a',
> > 'pattern': 'Linux',
> > 'config': 'conf-852',
> > }
> >
> > But it's not trying to boot conf-852 but instead just passing the
> > address. This image lacks a default config, which your example has and I
> > think is why the tests work in your case.
> >
>
> Hi,
>
> Yes, this case expects to have some default config in fit image as it uses
> 'bootm <addr>' command to boot, below change in fit image should work.
>
> configurations {
> default = "conf-852";
>
> test_net_tftpboot_boot_config - This case will boot from the given config:
> 'bootm 200000#conf-852'I think perhaps a related issue is that you're wanting to test that a FIT image with a default config works as expected. This should be added to test/py/tests/test_fit.py where we already construct and test assorted cases like that, and not handled in the "test OS boot" test I believe. -- Tom
signature.asc
Description: PGP signature
