On Tue, May 21, 2024 at 04:26:44PM +0530, Udit Kumar wrote: > Some use case needs rproc firmware to be loaded at u-boot stage, > using following commands at u-boot shell, firmware could be loaded > > => setenv dorprocboot 1 > => run boot_rprocs > > For Secure devices, secure version of rproc firmware should be loaded, > which is appended by sec keyword[0]. > but currently non-secure firmware is loaded even for secure devices. > So adding support for loading secure firmware on Secured devices.
Are you Cc'ing random people with this? Please don't do it. -- With Best Regards, Andy Shevchenko
