On Tue, 21 May 2024 16:26:44 +0530, Udit Kumar wrote: > Some use case needs rproc firmware to be loaded at u-boot stage, > using following commands at u-boot shell, firmware could be loaded > > => setenv dorprocboot 1 > => run boot_rprocs > > For Secure devices, secure version of rproc firmware should be loaded, > which is appended by sec keyword[0]. > but currently non-secure firmware is loaded even for secure devices. > So adding support for loading secure firmware on Secured devices. > > [...]
Applied to u-boot/next, thanks! -- Tom
