On 2024/6/8 04:17, Sebastian Kropatsch wrote:
The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB eMMC
storage, one M.2 M-Key connector, one RTL8211F 1GbE and one RTL8125
2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0 Type-A port, a
HDMI port, a 30-pin GPIO header as well as multiple buttons and LEDs.
Add initial support for this board using the upstream devicetree sources.
Tests in U-Boot proper:
- Booting from eMMC works
- 1GbE Ethernet works using the eth_eqos driver (tested by ping)
- 2.5GbE Ethernet works using the eth_rtl8169 driver (tested by ping),
but the status LEDs on this specific port currently aren't working
- NVMe SSD in M.2 socket does get recognized (tested with `nvme scan`
followed by `nvme details`)
Kernel commit:
d5f1d7437451 ("arm64: dts: rockchip: Add support for NanoPi R6C")
Signed-off-by: Sebastian Kropatsch <seb-...@mail.de>
Reviewed-by: Quentin Schulz <quentin.sch...@cherry.de>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
Changes v1 -> v2:
- Add missing 'S' to 'RK3588S' symbols
- Add similar board NanoPi R6S (new patch)
- Collect r-b tag from Quentin Schulz for patch 1
- Link to v1:
https://lore.kernel.org/u-boot/20240605155413.226629-1-seb-...@mail.de/
Hello!
The Ethernet status LEDs which sit directly on the 2.5GbE port using the
RTL8169 driver don't light up when connected and I couldn't figure out
why. The other port with a RTL8211F has no problems with the LEDs.
Have there been occurrences like this in combination with the RTL8125?
I'm trying to figure out if this is something that could be solved in
the devicetree or if this is a potential driver bug.
Secondly, the default active network device in U-Boot is the 1GbE one.
I believe it would make sense to make the 2.5GbE device the default
active one since this one is labeled "LAN", whereas the 1GbE is labeled
"WAN". However, since the 2.5GbE device is PCIe-based, it only shows up
in U-Boot proper after using the `pci enum` command (shows up as in gets
listed in `net list` and `dm tree`).
Do you have any tips on the preferred approach to handle this switch of
the default active net device? Is this even a sensible thing to include
in U-Boot in your opinion?
Thanks for your feedback!
Cheers,
Sebastian
---
arch/arm/dts/rk3588s-nanopi-r6c-u-boot.dtsi | 3 +
arch/arm/mach-rockchip/rk3588/Kconfig | 13 +++
board/friendlyelec/nanopi-r6c-rk3588s/Kconfig | 12 +++
.../nanopi-r6c-rk3588s/MAINTAINERS | 7 ++
configs/nanopi-r6c-rk3588s_defconfig | 83 +++++++++++++++++++
doc/board/rockchip/rockchip.rst | 1 +
include/configs/nanopi-r6c-rk3588s.h | 12 +++
7 files changed, 131 insertions(+)
create mode 100644 arch/arm/dts/rk3588s-nanopi-r6c-u-boot.dtsi
create mode 100644 board/friendlyelec/nanopi-r6c-rk3588s/Kconfig
create mode 100644 board/friendlyelec/nanopi-r6c-rk3588s/MAINTAINERS
create mode 100644 configs/nanopi-r6c-rk3588s_defconfig
create mode 100644 include/configs/nanopi-r6c-rk3588s.h
diff --git a/arch/arm/dts/rk3588s-nanopi-r6c-u-boot.dtsi
b/arch/arm/dts/rk3588s-nanopi-r6c-u-boot.dtsi
new file mode 100644
index 0000000000..853ed58cfe
--- /dev/null
+++ b/arch/arm/dts/rk3588s-nanopi-r6c-u-boot.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3588s-u-boot.dtsi"
diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig
b/arch/arm/mach-rockchip/rk3588/Kconfig
index 820e979abb..4b7d751c6f 100644
--- a/arch/arm/mach-rockchip/rk3588/Kconfig
+++ b/arch/arm/mach-rockchip/rk3588/Kconfig
@@ -78,6 +78,18 @@ config TARGET_NANOPCT6_RK3588
Power: 5.5*2.1mm DC Jack, 12VDC input
Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case)
+config TARGET_NANOPI_R6C_RK3588S
+ bool "FriendlyElec NanoPi R6C"
+ select BOARD_LATE_INIT
+ help
+ The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip
+ RK3588s.
+ It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB
+ eMMC storage, one M.2 M-Key connector, one RTL8211F 1GbE and one
+ RTL8125 2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0
+ Type-A port, a HDMI port, a 30-pin GPIO header as well as some
+ buttons and LEDs.
+
config TARGET_NOVA_RK3588
bool "Indiedroid Nova RK3588"
select BOARD_LATE_INIT
@@ -232,6 +244,7 @@ config TEXT_BASE
source "board/edgeble/neural-compute-module-6/Kconfig"
source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
+source "board/friendlyelec/nanopi-r6c-rk3588s/Kconfig"
source "board/indiedroid/nova/Kconfig"
source "board/pine64/quartzpro64-rk3588/Kconfig"
source "board/turing/turing-rk1-rk3588/Kconfig"
diff --git a/board/friendlyelec/nanopi-r6c-rk3588s/Kconfig
b/board/friendlyelec/nanopi-r6c-rk3588s/Kconfig
new file mode 100644
index 0000000000..2d8acbf62f
--- /dev/null
+++ b/board/friendlyelec/nanopi-r6c-rk3588s/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_NANOPI_R6C_RK3588S
+
+config SYS_BOARD
+ default "nanopi-r6c-rk3588s"
+
+config SYS_VENDOR
+ default "friendlyelec"
+
+config SYS_CONFIG_NAME
+ default "nanopi-r6c-rk3588s"
+
+endif
diff --git a/board/friendlyelec/nanopi-r6c-rk3588s/MAINTAINERS
b/board/friendlyelec/nanopi-r6c-rk3588s/MAINTAINERS
new file mode 100644
index 0000000000..18d0bd1287
--- /dev/null
+++ b/board/friendlyelec/nanopi-r6c-rk3588s/MAINTAINERS
@@ -0,0 +1,7 @@
+NANOPI-R6C
+M: Sebastian Kropatsch <seb-...@mail.de>
+S: Maintained
+F: arch/arm/dts/rk3588s-nanopi-r6c-u-boot.dtsi
+F: board/friendlyelec/nanopi-r6c-rk3588s
+F: configs/nanopi-r6c-rk3588s_defconfig
+F: include/configs/nanopi-r6c-rk3588s.h
diff --git a/configs/nanopi-r6c-rk3588s_defconfig
b/configs/nanopi-r6c-rk3588s_defconfig
new file mode 100644
index 0000000000..f8d2d67bd3
--- /dev/null
+++ b/configs/nanopi-r6c-rk3588s_defconfig
@@ -0,0 +1,83 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-nanopi-r6c"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_NANOPI_R6C_RK3588S=y
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-nanopi-r6c.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+# CONFIG_SPI_FLASH is not set
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index cfbf641f49..a3d9837dda 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -123,6 +123,7 @@ List of mainline supported Rockchip boards:
- Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588)
- Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588)
- FriendlyElec NanoPC-T6 (nanopc-t6-rk3588)
+ - FriendlyElec NanoPi R6C (nanopi-r6c-rk3588s)
- Generic RK3588S/RK3588 (generic-rk3588)
- Indiedroid Nova (nova-rk3588s)
- Pine64 QuartzPro64 (quartzpro64-rk3588)
diff --git a/include/configs/nanopi-r6c-rk3588s.h
b/include/configs/nanopi-r6c-rk3588s.h
new file mode 100644
index 0000000000..2b57d60eb5
--- /dev/null
+++ b/include/configs/nanopi-r6c-rk3588s.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __NANOPI_R6C_RK3588S_H
+#define __NANOPI_R6C_RK3588S_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __NANOPI_R6C_RK3588S_H */
