On 04/07/2024 08:50, Minda Chen wrote:
> Add Starfive JH7110 USB 2.0 PHY driver, which is generic
> PHY driver.
>
> Signed-off-by: Minda Chen <minda.c...@starfivetech.com>
> ---
> drivers/phy/Kconfig | 1 +
> drivers/phy/Makefile | 1 +
> drivers/phy/starfive/Kconfig | 14 +++
> drivers/phy/starfive/Makefile | 6 ++
> drivers/phy/starfive/phy-jh7110-usb2.c | 135 +++++++++++++++++++++++++
> 5 files changed, 157 insertions(+)
> create mode 100644 drivers/phy/starfive/Kconfig
> create mode 100644 drivers/phy/starfive/Makefile
> create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 8f767877e7..0c4d63a01f 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -307,5 +307,6 @@ source "drivers/phy/cadence/Kconfig"
> source "drivers/phy/ti/Kconfig"
> source "drivers/phy/qcom/Kconfig"
> source "drivers/phy/renesas/Kconfig"
> +source "drivers/phy/starfive/Kconfig"
>
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 7a2b764492..6ac867350c 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -44,3 +44,4 @@ obj-y += cadence/
> obj-y += ti/
> obj-y += qcom/
> obj-y += renesas/
> +obj-y += starfive/
> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
> new file mode 100644
> index 0000000000..11a819f8b2
> --- /dev/null
> +++ b/drivers/phy/starfive/Kconfig
> @@ -0,0 +1,14 @@
> +#
> +# Phy drivers for Starfive platforms
PHY?
> +#
> +
> +menu "Starfive PHY driver"
> +
> +config PHY_STARFIVE_JH7110_USB2
> + bool "Starfive JH7110 USB 2.0 PHY driver"
> + select PHY
> + help
> + Enable this to support the Starfive JH7110 USB 2.0 PHY.
> + Generic PHY driver JH7110 USB 2.0.
> +
> +endmenu
> diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
> new file mode 100644
> index 0000000000..a405a75e34
> --- /dev/null
> +++ b/drivers/phy/starfive/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2023 Starfive
> +#
> +
> +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2) += phy-jh7110-usb2.o
> diff --git a/drivers/phy/starfive/phy-jh7110-usb2.c
> b/drivers/phy/starfive/phy-jh7110-usb2.c
> new file mode 100644
> index 0000000000..d48c9f8a74
> --- /dev/null
> +++ b/drivers/phy/starfive/phy-jh7110-usb2.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * StarFive JH7110 USB 2.0 PHY driver
> + *
> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> + * Author: Minda Chen <minda.c...@starfivetech.com>
> + */
> +
> +#include <asm/io.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <dm/device_compat.h>
> +#include <errno.h>
> +#include <generic-phy.h>
> +#include <regmap.h>
> +#include <soc.h>
> +#include <syscon.h>
> +#include <linux/bitops.h>
> +#include <linux/err.h>
> +
> +#define USB_LS_KEEPALIVE_OFF 0x4
> +#define USB_LS_KEEPALIVE_ENABLE BIT(4)
> +#define USB_PHY_CLK_RATE 125000000
> +
> +struct jh7110_usb2_phy {
> + struct phy *phy;
> + void __iomem *regs;
> + struct clk *usb_125m_clk;
> + struct clk *app_125m;
> + enum phy_mode mode;
> +};
> +
> +static void usb2_set_ls_keepalive(struct jh7110_usb2_phy *phy, bool set)
> +{
> + /* Host mode enable the LS speed keep-alive signal */
> + if (set)
> + clrsetbits_le32(phy->regs + USB_LS_KEEPALIVE_OFF,
> + USB_LS_KEEPALIVE_ENABLE,
> + USB_LS_KEEPALIVE_ENABLE);
> + else
> + clrsetbits_le32(phy->regs + USB_LS_KEEPALIVE_OFF,
> + USB_LS_KEEPALIVE_ENABLE, 0);
> +}
> +
> +static int usb2_phy_set_mode(struct phy *_phy,
> + enum phy_mode mode, int submode)
> +{
> + struct udevice *dev = _phy->dev;
> + struct jh7110_usb2_phy *phy = dev_get_priv(dev);
> +
> + if (mode == phy->mode)
> + return 0;
> +
> + switch (mode) {
> + case PHY_MODE_USB_HOST:
> + case PHY_MODE_USB_DEVICE:
> + case PHY_MODE_USB_OTG:
> + dev_dbg(dev, "Changing phy to %d\n", mode);
> + phy->mode = mode;
> + usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE));
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int jh7110_usb2_phy_init(struct phy *_phy)
> +{
> + struct udevice *dev = _phy->dev;
> + struct jh7110_usb2_phy *phy = dev_get_priv(dev);
> + int ret;
> +
> + ret = clk_set_rate(phy->usb_125m_clk, USB_PHY_CLK_RATE);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set 125m clock\n");
> + return ret;
> + }
> +
> + return clk_prepare_enable(phy->app_125m);
> +}
> +
> +static int jh7110_usb2_phy_exit(struct phy *_phy)
> +{
> + struct udevice *dev = _phy->dev;
> + struct jh7110_usb2_phy *phy = dev_get_priv(dev);
> +
> + clk_disable_unprepare(phy->app_125m);
> +
> + return 0;
> +}
> +
> +struct phy_ops jh7110_usb2_phy_ops = {
> + .init = jh7110_usb2_phy_init,
> + .exit = jh7110_usb2_phy_exit,
> + .set_mode = usb2_phy_set_mode,
> +};
> +
> +int jh7110_usb2_phy_probe(struct udevice *dev)
> +{
> + struct jh7110_usb2_phy *phy = dev_get_priv(dev);
> +
> + phy->regs = dev_read_addr_ptr(dev);
> + if (!phy->regs)
> + return -EINVAL;
> +
> + phy->usb_125m_clk = devm_clk_get(dev, "125m");
> + if (IS_ERR(phy->usb_125m_clk)) {
> + dev_err(dev, "Failed to get 125m clock\n");
> + return PTR_ERR(phy->usb_125m_clk);
> + }
> +
> + phy->app_125m = devm_clk_get(dev, "app_125m");
> + if (IS_ERR(phy->app_125m)) {
> + dev_err(dev, "Failed to get app 125m clock\n");
> + return PTR_ERR(phy->app_125m);
> + }
> +
> + return 0;
> +}
> +
> +static const struct udevice_id jh7110_usb2_phy[] = {
> + { .compatible = "starfive,jh7110-usb-phy"},
> + {},
> +};
> +
> +U_BOOT_DRIVER(jh7110_usb2_phy) = {
> + .name = "jh7110_usb2_phy",
> + .id = UCLASS_PHY,
> + .of_match = jh7110_usb2_phy,
> + .probe = jh7110_usb2_phy_probe,
> + .ops = &jh7110_usb2_phy_ops,
> + .priv_auto = sizeof(struct jh7110_usb2_phy),
how about space instead of tab?
> +};
Reviewed-by: Roger Quadros <rog...@kernel.org>
--
cheers,
-roger
